/*
 * Copyright 2015 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "model/controller/controller_properties.h"

#include <array>
#include <cstdint>
#include <utility>
#include <vector>

#include "log.h"
#include "packets/hci_packets.h"
#include "rootcanal/configuration.pb.h"

namespace rootcanal {
using namespace bluetooth::hci;

static constexpr uint64_t Page0LmpFeatures() {
  LMPFeaturesPage0Bits features[] = {
          LMPFeaturesPage0Bits::LMP_3_SLOT_PACKETS,
          LMPFeaturesPage0Bits::LMP_5_SLOT_PACKETS,
          LMPFeaturesPage0Bits::ENCRYPTION,
          LMPFeaturesPage0Bits::SLOT_OFFSET,
          LMPFeaturesPage0Bits::TIMING_ACCURACY,
          LMPFeaturesPage0Bits::ROLE_SWITCH,
          LMPFeaturesPage0Bits::HOLD_MODE,
          LMPFeaturesPage0Bits::SNIFF_MODE,
          LMPFeaturesPage0Bits::POWER_CONTROL_REQUESTS,
          LMPFeaturesPage0Bits::CHANNEL_QUALITY_DRIVEN_DATA_RATE,
          LMPFeaturesPage0Bits::SCO_LINK,
          LMPFeaturesPage0Bits::HV2_PACKETS,
          LMPFeaturesPage0Bits::HV3_PACKETS,
          LMPFeaturesPage0Bits::M_LAW_LOG_SYNCHRONOUS_DATA,
          LMPFeaturesPage0Bits::A_LAW_LOG_SYNCHRONOUS_DATA,
          LMPFeaturesPage0Bits::CVSD_SYNCHRONOUS_DATA,
          LMPFeaturesPage0Bits::PAGING_PARAMETER_NEGOTIATION,
          LMPFeaturesPage0Bits::POWER_CONTROL,
          LMPFeaturesPage0Bits::TRANSPARENT_SYNCHRONOUS_DATA,
          LMPFeaturesPage0Bits::BROADCAST_ENCRYPTION,
          LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ACL_2_MB_S_MODE,
          LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ACL_3_MB_S_MODE,
          LMPFeaturesPage0Bits::ENHANCED_INQUIRY_SCAN,
          LMPFeaturesPage0Bits::INTERLACED_INQUIRY_SCAN,
          LMPFeaturesPage0Bits::INTERLACED_PAGE_SCAN,
          LMPFeaturesPage0Bits::RSSI_WITH_INQUIRY_RESULTS,
          LMPFeaturesPage0Bits::EXTENDED_SCO_LINK,
          LMPFeaturesPage0Bits::EV4_PACKETS,
          LMPFeaturesPage0Bits::EV5_PACKETS,
          LMPFeaturesPage0Bits::AFH_CAPABLE_PERIPHERAL,
          LMPFeaturesPage0Bits::AFH_CLASSIFICATION_PERIPHERAL,
          LMPFeaturesPage0Bits::LE_SUPPORTED_CONTROLLER,
          LMPFeaturesPage0Bits::LMP_3_SLOT_ENHANCED_DATA_RATE_ACL_PACKETS,
          LMPFeaturesPage0Bits::LMP_5_SLOT_ENHANCED_DATA_RATE_ACL_PACKETS,
          LMPFeaturesPage0Bits::SNIFF_SUBRATING,
          LMPFeaturesPage0Bits::PAUSE_ENCRYPTION,
          LMPFeaturesPage0Bits::AFH_CAPABLE_CENTRAL,
          LMPFeaturesPage0Bits::AFH_CLASSIFICATION_CENTRAL,
          LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ESCO_2_MB_S_MODE,
          LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ESCO_3_MB_S_MODE,
          LMPFeaturesPage0Bits::LMP_3_SLOT_ENHANCED_DATA_RATE_ESCO_PACKETS,
          LMPFeaturesPage0Bits::EXTENDED_INQUIRY_RESPONSE,
          LMPFeaturesPage0Bits::SIMULTANEOUS_LE_AND_BR_CONTROLLER,
          LMPFeaturesPage0Bits::SECURE_SIMPLE_PAIRING_CONTROLLER,
          LMPFeaturesPage0Bits::ENCAPSULATED_PDU,
          LMPFeaturesPage0Bits::HCI_LINK_SUPERVISION_TIMEOUT_CHANGED_EVENT,
          LMPFeaturesPage0Bits::VARIABLE_INQUIRY_TX_POWER_LEVEL,
          LMPFeaturesPage0Bits::ENHANCED_POWER_CONTROL,
          LMPFeaturesPage0Bits::EXTENDED_FEATURES};

  uint64_t value = 0;
  for (auto feature : features) {
    value |= static_cast<uint64_t>(feature);
  }
  return value;
}

static constexpr uint64_t Page2LmpFeatures() {
  LMPFeaturesPage2Bits features[] = {
          LMPFeaturesPage2Bits::SECURE_CONNECTIONS_CONTROLLER_SUPPORT,
          LMPFeaturesPage2Bits::PING,
  };

  uint64_t value = 0;
  for (auto feature : features) {
    value |= static_cast<uint64_t>(feature);
  }
  return value;
}

static constexpr uint64_t LlFeatures() {
  LLFeaturesBits features[] = {
          LLFeaturesBits::LE_ENCRYPTION,
          LLFeaturesBits::CONNECTION_PARAMETERS_REQUEST_PROCEDURE,
          LLFeaturesBits::EXTENDED_REJECT_INDICATION,
          LLFeaturesBits::PERIPHERAL_INITIATED_FEATURES_EXCHANGE,
          LLFeaturesBits::LE_PING,
          LLFeaturesBits::LL_PRIVACY,
          LLFeaturesBits::EXTENDED_SCANNER_FILTER_POLICIES,
          LLFeaturesBits::LE_2M_PHY,
          LLFeaturesBits::LE_CODED_PHY,
          LLFeaturesBits::LE_EXTENDED_ADVERTISING,
          LLFeaturesBits::LE_PERIODIC_ADVERTISING,

          LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL,
          LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL,
  };

  uint64_t value = 0;
  for (auto feature : features) {
    value |= static_cast<uint64_t>(feature);
  }
  return value;
}

static std::array<uint8_t, 64> SupportedCommands() {
  OpCodeIndex supported_commands[] = {
          // LINK_CONTROL
          OpCodeIndex::INQUIRY, OpCodeIndex::INQUIRY_CANCEL,
          // OpCodeIndex::PERIODIC_INQUIRY_MODE,
          // OpCodeIndex::EXIT_PERIODIC_INQUIRY_MODE,
          OpCodeIndex::CREATE_CONNECTION, OpCodeIndex::DISCONNECT, OpCodeIndex::ADD_SCO_CONNECTION,
          OpCodeIndex::CREATE_CONNECTION_CANCEL, OpCodeIndex::ACCEPT_CONNECTION_REQUEST,
          OpCodeIndex::REJECT_CONNECTION_REQUEST, OpCodeIndex::LINK_KEY_REQUEST_REPLY,
          OpCodeIndex::LINK_KEY_REQUEST_NEGATIVE_REPLY, OpCodeIndex::PIN_CODE_REQUEST_REPLY,
          OpCodeIndex::PIN_CODE_REQUEST_NEGATIVE_REPLY, OpCodeIndex::CHANGE_CONNECTION_PACKET_TYPE,
          OpCodeIndex::AUTHENTICATION_REQUESTED, OpCodeIndex::SET_CONNECTION_ENCRYPTION,
          OpCodeIndex::CHANGE_CONNECTION_LINK_KEY, OpCodeIndex::CENTRAL_LINK_KEY,
          OpCodeIndex::REMOTE_NAME_REQUEST,
          // OpCodeIndex::REMOTE_NAME_REQUEST_CANCEL,
          OpCodeIndex::READ_REMOTE_SUPPORTED_FEATURES, OpCodeIndex::READ_REMOTE_EXTENDED_FEATURES,
          OpCodeIndex::READ_REMOTE_VERSION_INFORMATION, OpCodeIndex::READ_CLOCK_OFFSET,
          OpCodeIndex::READ_LMP_HANDLE, OpCodeIndex::SETUP_SYNCHRONOUS_CONNECTION,
          OpCodeIndex::ACCEPT_SYNCHRONOUS_CONNECTION, OpCodeIndex::REJECT_SYNCHRONOUS_CONNECTION,
          OpCodeIndex::IO_CAPABILITY_REQUEST_REPLY, OpCodeIndex::USER_CONFIRMATION_REQUEST_REPLY,
          OpCodeIndex::USER_CONFIRMATION_REQUEST_NEGATIVE_REPLY,
          OpCodeIndex::USER_PASSKEY_REQUEST_REPLY, OpCodeIndex::USER_PASSKEY_REQUEST_NEGATIVE_REPLY,
          OpCodeIndex::REMOTE_OOB_DATA_REQUEST_REPLY,
          OpCodeIndex::REMOTE_OOB_DATA_REQUEST_NEGATIVE_REPLY,
          OpCodeIndex::IO_CAPABILITY_REQUEST_NEGATIVE_REPLY,
          OpCodeIndex::ENHANCED_SETUP_SYNCHRONOUS_CONNECTION,
          OpCodeIndex::ENHANCED_ACCEPT_SYNCHRONOUS_CONNECTION,
          // OpCodeIndex::TRUNCATED_PAGE,
          // OpCodeIndex::TRUNCATED_PAGE_CANCEL,
          // OpCodeIndex::SET_CONNECTIONLESS_PERIPHERAL_BROADCAST,
          // OpCodeIndex::SET_CONNECTIONLESS_PERIPHERAL_BROADCAST_RECEIVE,
          // OpCodeIndex::START_SYNCHRONIZATION_TRAIN,
          // OpCodeIndex::RECEIVE_SYNCHRONIZATION_TRAIN,
          OpCodeIndex::REMOTE_OOB_EXTENDED_DATA_REQUEST_REPLY,

          // LINK_POLICY
          OpCodeIndex::HOLD_MODE, OpCodeIndex::SNIFF_MODE, OpCodeIndex::EXIT_SNIFF_MODE,
          OpCodeIndex::QOS_SETUP, OpCodeIndex::ROLE_DISCOVERY, OpCodeIndex::SWITCH_ROLE,
          OpCodeIndex::READ_LINK_POLICY_SETTINGS, OpCodeIndex::WRITE_LINK_POLICY_SETTINGS,
          OpCodeIndex::READ_DEFAULT_LINK_POLICY_SETTINGS,
          OpCodeIndex::WRITE_DEFAULT_LINK_POLICY_SETTINGS, OpCodeIndex::FLOW_SPECIFICATION,
          OpCodeIndex::SNIFF_SUBRATING,

          // CONTROLLER_AND_BASEBAND
          OpCodeIndex::SET_EVENT_MASK, OpCodeIndex::RESET, OpCodeIndex::SET_EVENT_FILTER,
          OpCodeIndex::FLUSH,
          // OpCodeIndex::READ_PIN_TYPE,
          // OpCodeIndex::WRITE_PIN_TYPE,
          // OpCodeIndex::READ_STORED_LINK_KEY,
          // OpCodeIndex::WRITE_STORED_LINK_KEY,
          OpCodeIndex::DELETE_STORED_LINK_KEY, OpCodeIndex::WRITE_LOCAL_NAME,
          OpCodeIndex::READ_LOCAL_NAME, OpCodeIndex::READ_CONNECTION_ACCEPT_TIMEOUT,
          OpCodeIndex::WRITE_CONNECTION_ACCEPT_TIMEOUT, OpCodeIndex::READ_PAGE_TIMEOUT,
          OpCodeIndex::WRITE_PAGE_TIMEOUT, OpCodeIndex::READ_SCAN_ENABLE,
          OpCodeIndex::WRITE_SCAN_ENABLE, OpCodeIndex::READ_PAGE_SCAN_ACTIVITY,
          OpCodeIndex::WRITE_PAGE_SCAN_ACTIVITY, OpCodeIndex::READ_INQUIRY_SCAN_ACTIVITY,
          OpCodeIndex::WRITE_INQUIRY_SCAN_ACTIVITY, OpCodeIndex::READ_AUTHENTICATION_ENABLE,
          OpCodeIndex::WRITE_AUTHENTICATION_ENABLE, OpCodeIndex::READ_CLASS_OF_DEVICE,
          OpCodeIndex::WRITE_CLASS_OF_DEVICE, OpCodeIndex::READ_VOICE_SETTING,
          OpCodeIndex::WRITE_VOICE_SETTING, OpCodeIndex::READ_AUTOMATIC_FLUSH_TIMEOUT,
          OpCodeIndex::WRITE_AUTOMATIC_FLUSH_TIMEOUT,
          // OpCodeIndex::READ_NUM_BROADCAST_RETRANSMITS,
          // OpCodeIndex::WRITE_NUM_BROADCAST_RETRANSMITS,
          OpCodeIndex::READ_HOLD_MODE_ACTIVITY, OpCodeIndex::WRITE_HOLD_MODE_ACTIVITY,
          OpCodeIndex::READ_TRANSMIT_POWER_LEVEL, OpCodeIndex::READ_SYNCHRONOUS_FLOW_CONTROL_ENABLE,
          OpCodeIndex::WRITE_SYNCHRONOUS_FLOW_CONTROL_ENABLE,
          OpCodeIndex::SET_CONTROLLER_TO_HOST_FLOW_CONTROL, OpCodeIndex::HOST_BUFFER_SIZE,
          OpCodeIndex::HOST_NUMBER_OF_COMPLETED_PACKETS, OpCodeIndex::READ_LINK_SUPERVISION_TIMEOUT,
          OpCodeIndex::WRITE_LINK_SUPERVISION_TIMEOUT, OpCodeIndex::READ_NUMBER_OF_SUPPORTED_IAC,
          OpCodeIndex::READ_CURRENT_IAC_LAP, OpCodeIndex::WRITE_CURRENT_IAC_LAP,
          OpCodeIndex::SET_AFH_HOST_CHANNEL_CLASSIFICATION, OpCodeIndex::READ_INQUIRY_SCAN_TYPE,
          OpCodeIndex::WRITE_INQUIRY_SCAN_TYPE, OpCodeIndex::READ_INQUIRY_MODE,
          OpCodeIndex::WRITE_INQUIRY_MODE, OpCodeIndex::READ_PAGE_SCAN_TYPE,
          OpCodeIndex::WRITE_PAGE_SCAN_TYPE, OpCodeIndex::READ_AFH_CHANNEL_ASSESSMENT_MODE,
          OpCodeIndex::WRITE_AFH_CHANNEL_ASSESSMENT_MODE,
          OpCodeIndex::READ_EXTENDED_INQUIRY_RESPONSE, OpCodeIndex::WRITE_EXTENDED_INQUIRY_RESPONSE,
          OpCodeIndex::REFRESH_ENCRYPTION_KEY, OpCodeIndex::READ_SIMPLE_PAIRING_MODE,
          OpCodeIndex::WRITE_SIMPLE_PAIRING_MODE, OpCodeIndex::READ_LOCAL_OOB_DATA,
          OpCodeIndex::READ_INQUIRY_RESPONSE_TRANSMIT_POWER_LEVEL,
          OpCodeIndex::WRITE_INQUIRY_TRANSMIT_POWER_LEVEL,
          // OpCodeIndex::READ_DEFAULT_ERRONEOUS_DATA_REPORTING,
          // OpCodeIndex::WRITE_DEFAULT_ERRONEOUS_DATA_REPORTING,
          OpCodeIndex::ENHANCED_FLUSH, OpCodeIndex::SEND_KEYPRESS_NOTIFICATION,
          OpCodeIndex::SET_EVENT_MASK_PAGE_2,
          // OpCodeIndex::READ_FLOW_CONTROL_MODE,
          // OpCodeIndex::WRITE_FLOW_CONTROL_MODE,
          OpCodeIndex::READ_ENHANCED_TRANSMIT_POWER_LEVEL, OpCodeIndex::READ_LE_HOST_SUPPORT,
          OpCodeIndex::WRITE_LE_HOST_SUPPORT,
          // OpCodeIndex::SET_MWS_CHANNEL_PARAMETERS,
          // OpCodeIndex::SET_EXTERNAL_FRAME_CONFIGURATION,
          // OpCodeIndex::SET_MWS_SIGNALING,
          // OpCodeIndex::SET_MWS_TRANSPORT_LAYER,
          // OpCodeIndex::SET_MWS_SCAN_FREQUENCY_TABLE,
          // OpCodeIndex::SET_MWS_PATTERN_CONFIGURATION,
          // OpCodeIndex::SET_RESERVED_LT_ADDR,
          // OpCodeIndex::DELETE_RESERVED_LT_ADDR,
          // OpCodeIndex::SET_CONNECTIONLESS_PERIPHERAL_BROADCAST_DATA,
          // OpCodeIndex::READ_SYNCHRONIZATION_TRAIN_PARAMETERS,
          // OpCodeIndex::WRITE_SYNCHRONIZATION_TRAIN_PARAMETERS,
          OpCodeIndex::READ_SECURE_CONNECTIONS_HOST_SUPPORT,
          OpCodeIndex::WRITE_SECURE_CONNECTIONS_HOST_SUPPORT,
          OpCodeIndex::READ_AUTHENTICATED_PAYLOAD_TIMEOUT,
          OpCodeIndex::WRITE_AUTHENTICATED_PAYLOAD_TIMEOUT,
          OpCodeIndex::READ_LOCAL_OOB_EXTENDED_DATA,
          // OpCodeIndex::READ_EXTENDED_PAGE_TIMEOUT,
          // OpCodeIndex::WRITE_EXTENDED_PAGE_TIMEOUT,
          // OpCodeIndex::READ_EXTENDED_INQUIRY_LENGTH,
          // OpCodeIndex::WRITE_EXTENDED_INQUIRY_LENGTH,
          // OpCodeIndex::SET_ECOSYSTEM_BASE_INTERVAL,
          // OpCodeIndex::CONFIGURE_DATA_PATH,
          // OpCodeIndex::SET_MIN_ENCRYPTION_KEY_SIZE,

          // INFORMATIONAL_PARAMETERS
          OpCodeIndex::READ_LOCAL_VERSION_INFORMATION, OpCodeIndex::READ_LOCAL_SUPPORTED_FEATURES,
          OpCodeIndex::READ_LOCAL_EXTENDED_FEATURES, OpCodeIndex::READ_BUFFER_SIZE,
          OpCodeIndex::READ_BD_ADDR,
          // OpCodeIndex::READ_DATA_BLOCK_SIZE,
          OpCodeIndex::READ_LOCAL_SUPPORTED_CODECS_V1,
          // OpCodeIndex::READ_LOCAL_SIMPLE_PAIRING_OPTIONS,
          // OpCodeIndex::READ_LOCAL_SUPPORTED_CODECS_V2,
          // OpCodeIndex::READ_LOCAL_SUPPORTED_CODEC_CAPABILITIES,
          // OpCodeIndex::READ_LOCAL_SUPPORTED_CONTROLLER_DELAY,

          // STATUS_PARAMETERS
          OpCodeIndex::READ_FAILED_CONTACT_COUNTER, OpCodeIndex::RESET_FAILED_CONTACT_COUNTER,
          // OpCodeIndex::READ_LINK_QUALITY,
          OpCodeIndex::READ_RSSI, OpCodeIndex::READ_AFH_CHANNEL_MAP,
          // OpCodeIndex::READ_CLOCK,
          OpCodeIndex::READ_ENCRYPTION_KEY_SIZE,
          // OpCodeIndex::GET_MWS_TRANSPORT_LAYER_CONFIGURATION,
          // OpCodeIndex::SET_TRIGGERED_CLOCK_CAPTURE,

          // TESTING
          OpCodeIndex::READ_LOOPBACK_MODE, OpCodeIndex::WRITE_LOOPBACK_MODE,
          OpCodeIndex::ENABLE_IMPLEMENTATION_UNDER_TEST_MODE,
          OpCodeIndex::WRITE_SIMPLE_PAIRING_DEBUG_MODE,
          OpCodeIndex::WRITE_SECURE_CONNECTIONS_TEST_MODE,

          // LE_CONTROLLER
          OpCodeIndex::LE_SET_EVENT_MASK, OpCodeIndex::LE_READ_BUFFER_SIZE_V1,
          OpCodeIndex::LE_READ_LOCAL_SUPPORTED_FEATURES_PAGE_0, OpCodeIndex::LE_SET_RANDOM_ADDRESS,
          OpCodeIndex::LE_SET_ADVERTISING_PARAMETERS,
          OpCodeIndex::LE_READ_ADVERTISING_PHYSICAL_CHANNEL_TX_POWER,
          OpCodeIndex::LE_SET_ADVERTISING_DATA, OpCodeIndex::LE_SET_SCAN_RESPONSE_DATA,
          OpCodeIndex::LE_SET_ADVERTISING_ENABLE, OpCodeIndex::LE_SET_SCAN_PARAMETERS,
          OpCodeIndex::LE_SET_SCAN_ENABLE, OpCodeIndex::LE_CREATE_CONNECTION,
          OpCodeIndex::LE_CREATE_CONNECTION_CANCEL, OpCodeIndex::LE_READ_FILTER_ACCEPT_LIST_SIZE,
          OpCodeIndex::LE_CLEAR_FILTER_ACCEPT_LIST,
          OpCodeIndex::LE_ADD_DEVICE_TO_FILTER_ACCEPT_LIST,
          OpCodeIndex::LE_REMOVE_DEVICE_FROM_FILTER_ACCEPT_LIST, OpCodeIndex::LE_CONNECTION_UPDATE,
          OpCodeIndex::LE_SET_HOST_CHANNEL_CLASSIFICATION, OpCodeIndex::LE_READ_CHANNEL_MAP,
          OpCodeIndex::LE_READ_REMOTE_FEATURES_PAGE_0, OpCodeIndex::LE_ENCRYPT,
          OpCodeIndex::LE_RAND, OpCodeIndex::LE_START_ENCRYPTION,
          OpCodeIndex::LE_LONG_TERM_KEY_REQUEST_REPLY,
          OpCodeIndex::LE_LONG_TERM_KEY_REQUEST_NEGATIVE_REPLY,
          OpCodeIndex::LE_READ_SUPPORTED_STATES, OpCodeIndex::LE_RECEIVER_TEST_V1,
          OpCodeIndex::LE_TRANSMITTER_TEST_V1, OpCodeIndex::LE_TEST_END,
          OpCodeIndex::LE_REMOTE_CONNECTION_PARAMETER_REQUEST_REPLY,
          OpCodeIndex::LE_REMOTE_CONNECTION_PARAMETER_REQUEST_NEGATIVE_REPLY,
          // OpCodeIndex::LE_SET_DATA_LENGTH,
          OpCodeIndex::LE_READ_SUGGESTED_DEFAULT_DATA_LENGTH,
          OpCodeIndex::LE_WRITE_SUGGESTED_DEFAULT_DATA_LENGTH,
          OpCodeIndex::LE_READ_LOCAL_P_256_PUBLIC_KEY,
          // OpCodeIndex::LE_GENERATE_DHKEY_V1,
          OpCodeIndex::LE_ADD_DEVICE_TO_RESOLVING_LIST,
          OpCodeIndex::LE_REMOVE_DEVICE_FROM_RESOLVING_LIST, OpCodeIndex::LE_CLEAR_RESOLVING_LIST,
          OpCodeIndex::LE_READ_RESOLVING_LIST_SIZE, OpCodeIndex::LE_READ_PEER_RESOLVABLE_ADDRESS,
          OpCodeIndex::LE_READ_LOCAL_RESOLVABLE_ADDRESS,
          OpCodeIndex::LE_SET_ADDRESS_RESOLUTION_ENABLE,
          OpCodeIndex::LE_SET_RESOLVABLE_PRIVATE_ADDRESS_TIMEOUT,
          OpCodeIndex::LE_READ_MAXIMUM_DATA_LENGTH, OpCodeIndex::LE_READ_PHY,
          OpCodeIndex::LE_SET_DEFAULT_PHY, OpCodeIndex::LE_SET_PHY,
          // OpCodeIndex::LE_RECEIVER_TEST_V2,
          // OpCodeIndex::LE_TRANSMITTER_TEST_V2,
          OpCodeIndex::LE_SET_ADVERTISING_SET_RANDOM_ADDRESS,
          OpCodeIndex::LE_SET_EXTENDED_ADVERTISING_PARAMETERS_V1,
          OpCodeIndex::LE_SET_EXTENDED_ADVERTISING_DATA,
          OpCodeIndex::LE_SET_EXTENDED_SCAN_RESPONSE_DATA,
          OpCodeIndex::LE_SET_EXTENDED_ADVERTISING_ENABLE,
          OpCodeIndex::LE_READ_MAXIMUM_ADVERTISING_DATA_LENGTH,
          OpCodeIndex::LE_READ_NUMBER_OF_SUPPORTED_ADVERTISING_SETS,
          OpCodeIndex::LE_REMOVE_ADVERTISING_SET, OpCodeIndex::LE_CLEAR_ADVERTISING_SETS,
          OpCodeIndex::LE_SET_PERIODIC_ADVERTISING_PARAMETERS_V1,
          OpCodeIndex::LE_SET_PERIODIC_ADVERTISING_DATA,
          OpCodeIndex::LE_SET_PERIODIC_ADVERTISING_ENABLE,
          OpCodeIndex::LE_SET_EXTENDED_SCAN_PARAMETERS, OpCodeIndex::LE_SET_EXTENDED_SCAN_ENABLE,
          OpCodeIndex::LE_EXTENDED_CREATE_CONNECTION_V1,
          OpCodeIndex::LE_PERIODIC_ADVERTISING_CREATE_SYNC,
          OpCodeIndex::LE_PERIODIC_ADVERTISING_CREATE_SYNC_CANCEL,
          OpCodeIndex::LE_PERIODIC_ADVERTISING_TERMINATE_SYNC,
          OpCodeIndex::LE_ADD_DEVICE_TO_PERIODIC_ADVERTISER_LIST,
          OpCodeIndex::LE_REMOVE_DEVICE_FROM_PERIODIC_ADVERTISER_LIST,
          OpCodeIndex::LE_CLEAR_PERIODIC_ADVERTISER_LIST,
          OpCodeIndex::LE_READ_PERIODIC_ADVERTISER_LIST_SIZE,
          // OpCodeIndex::LE_READ_TRANSMIT_POWER,
          OpCodeIndex::LE_READ_RF_PATH_COMPENSATION_POWER,
          OpCodeIndex::LE_WRITE_RF_PATH_COMPENSATION_POWER, OpCodeIndex::LE_SET_PRIVACY_MODE,
          // OpCodeIndex::LE_RECEIVER_TEST_V3,
          // OpCodeIndex::LE_TRANSMITTER_TEST_V3,
          // OpCodeIndex::LE_SET_CONNECTIONLESS_CTE_TRANSMIT_PARAMETERS,
          // OpCodeIndex::LE_SET_CONNECTIONLESS_CTE_TRANSMIT_ENABLE,
          // OpCodeIndex::LE_SET_CONNECTIONLESS_IQ_SAMPLING_ENABLE,
          // OpCodeIndex::LE_SET_CONNECTION_CTE_RECEIVE_PARAMETERS,
          // OpCodeIndex::LE_SET_CONNECTION_CTE_TRANSMIT_PARAMETERS,
          // OpCodeIndex::LE_CONNECTION_CTE_REQUEST_ENABLE,
          // OpCodeIndex::LE_CONNECTION_CTE_RESPONSE_ENABLE,
          // OpCodeIndex::LE_READ_ANTENNA_INFORMATION,
          // OpCodeIndex::LE_SET_PERIODIC_ADVERTISING_RECEIVE_ENABLE,
          // OpCodeIndex::LE_PERIODIC_ADVERTISING_SYNC_TRANSFER,
          // OpCodeIndex::LE_PERIODIC_ADVERTISING_SET_INFO_TRANSFER,
          // OpCodeIndex::LE_SET_PERIODIC_ADVERTISING_SYNC_TRANSFER_PARAMETERS,
          // OpCodeIndex::LE_SET_DEFAULT_PERIODIC_ADVERTISING_SYNC_TRANSFER_PARAMETERS,
          // OpCodeIndex::LE_GENERATE_DHKEY_V2,
          // OpCodeIndex::LE_MODIFY_SLEEP_CLOCK_ACCURACY,
          OpCodeIndex::LE_READ_BUFFER_SIZE_V2,
          // OpCodeIndex::LE_READ_ISO_TX_SYNC,
          OpCodeIndex::LE_SET_CIG_PARAMETERS, OpCodeIndex::LE_SET_CIG_PARAMETERS_TEST,
          OpCodeIndex::LE_CREATE_CIS, OpCodeIndex::LE_REMOVE_CIG,
          OpCodeIndex::LE_ACCEPT_CIS_REQUEST, OpCodeIndex::LE_REJECT_CIS_REQUEST,
          // OpCodeIndex::LE_CREATE_BIG,
          // OpCodeIndex::LE_CREATE_BIG_TEST,
          // OpCodeIndex::LE_TERMINATE_BIG,
          // OpCodeIndex::LE_BIG_CREATE_SYNC,
          // OpCodeIndex::LE_BIG_TERMINATE_SYNC,
          OpCodeIndex::LE_REQUEST_PEER_SCA, OpCodeIndex::LE_SETUP_ISO_DATA_PATH,
          OpCodeIndex::LE_REMOVE_ISO_DATA_PATH,
          // OpCodeIndex::LE_ISO_TRANSMIT_TEST,
          // OpCodeIndex::LE_ISO_RECEIVE_TEST,
          // OpCodeIndex::LE_ISO_READ_TEST_COUNTERS,
          // OpCodeIndex::LE_ISO_TEST_END,
          OpCodeIndex::LE_SET_HOST_FEATURE_V1,
          // OpCodeIndex::LE_READ_ISO_LINK_QUALITY,
          // OpCodeIndex::LE_ENHANCED_READ_TRANSMIT_POWER_LEVEL,
          // OpCodeIndex::LE_READ_REMOTE_TRANSMIT_POWER_LEVEL,
          // OpCodeIndex::LE_SET_PATH_LOSS_REPORTING_PARAMETERS,
          // OpCodeIndex::LE_SET_PATH_LOSS_REPORTING_ENABLE,
          // OpCodeIndex::LE_SET_TRANSMIT_POWER_REPORTING_ENABLE,
          // OpCodeIndex::LE_TRANSMITTER_TEST_V4,
          // OpCodeIndex::LE_SET_DATA_RELATED_ADDRESS_CHANGES,
          // OpCodeIndex::LE_SET_DEFAULT_SUBRATE,
          // OpCodeIndex::LE_SUBRATE_REQUEST,
  };

  std::array<uint8_t, 64> value{};
  for (auto command : supported_commands) {
    int index = static_cast<int>(command);
    value[index / 10] |= 1U << (index % 10);
  }

  return value;
}

bool ControllerProperties::CheckSupportedFeatures() const {
  // Vol 2, Part C § 3.3 Feature mask definition.
  // Check for reserved or deprecated feature bits.
  //
  // Note: the specification for v1.0 and v1.1 is no longer available for
  // download, the reserved feature bits are copied over from v1.2.
  uint64_t lmp_page_0_reserved_bits = 0;
  uint64_t lmp_page_2_reserved_bits = 0;
  switch (lmp_version) {
    case bluetooth::hci::LmpVersion::V_1_0B:
      lmp_page_0_reserved_bits = UINT64_C(0x7fffe7e407000000);
      lmp_page_2_reserved_bits = UINT64_C(0xffffffffffffffff);
      break;
    case bluetooth::hci::LmpVersion::V_1_1:
      lmp_page_0_reserved_bits = UINT64_C(0x7fffe7e407000000);
      lmp_page_2_reserved_bits = UINT64_C(0xffffffffffffffff);
      break;
    case bluetooth::hci::LmpVersion::V_1_2:
      lmp_page_0_reserved_bits = UINT64_C(0x7fffe7e407000000);
      lmp_page_2_reserved_bits = UINT64_C(0xffffffffffffffff);
      break;
    case bluetooth::hci::LmpVersion::V_2_0:
      lmp_page_0_reserved_bits = UINT64_C(0x7fff066401000000);
      lmp_page_2_reserved_bits = UINT64_C(0xffffffffffffffff);
      break;
    case bluetooth::hci::LmpVersion::V_2_1:
      lmp_page_0_reserved_bits = UINT64_C(0x7c86006401000000);
      lmp_page_2_reserved_bits = UINT64_C(0xffffffffffffffff);
      break;
    case bluetooth::hci::LmpVersion::V_3_0:
      lmp_page_0_reserved_bits = UINT64_C(0x7886006401000000);
      lmp_page_2_reserved_bits = UINT64_C(0xffffffffffffffff);
      break;
    case bluetooth::hci::LmpVersion::V_4_0:
      lmp_page_0_reserved_bits = UINT64_C(0x7884000401000000);
      lmp_page_2_reserved_bits = UINT64_C(0xffffffffffffffff);
      break;
    case bluetooth::hci::LmpVersion::V_4_1:
      lmp_page_0_reserved_bits = UINT64_C(0x7884000401000000);
      lmp_page_2_reserved_bits = UINT64_C(0xfffffffffffff480);
      break;
    case bluetooth::hci::LmpVersion::V_4_2:
      lmp_page_0_reserved_bits = UINT64_C(0x7884000401000000);
      lmp_page_2_reserved_bits = UINT64_C(0xfffffffffffff480);
      break;
    case bluetooth::hci::LmpVersion::V_5_0:
      lmp_page_0_reserved_bits = UINT64_C(0x7884000401000100);
      lmp_page_2_reserved_bits = UINT64_C(0xfffffffffffff480);
      break;
    case bluetooth::hci::LmpVersion::V_5_1:
      lmp_page_0_reserved_bits = UINT64_C(0x7884000401000100);
      lmp_page_2_reserved_bits = UINT64_C(0xfffffffffffff080);
      break;
    case bluetooth::hci::LmpVersion::V_5_2:
      lmp_page_0_reserved_bits = UINT64_C(0x7884000401000100);
      lmp_page_2_reserved_bits = UINT64_C(0xfffffffffffff080);
      break;
    case bluetooth::hci::LmpVersion::V_5_3:
    default:
      lmp_page_0_reserved_bits = UINT64_C(0x7884000401000100);
      lmp_page_2_reserved_bits = UINT64_C(0xfffffffffffff080);
      break;
  }

  if ((lmp_page_0_reserved_bits & lmp_features[0]) != 0) {
    INFO("The page 0 feature bits 0x{:016x}"
         " are reserved in the specification {}",
         lmp_page_0_reserved_bits & lmp_features[0], LmpVersionText(lmp_version));
    return false;
  }

  if ((lmp_page_2_reserved_bits & lmp_features[2]) != 0) {
    INFO("The page 2 feature bits 0x{:016x}"
         " are reserved in the specification {}",
         lmp_page_2_reserved_bits & lmp_features[2], LmpVersionText(lmp_version));
    return false;
  }

  // Vol 2, Part C § 3.5 Feature requirements.
  // RootCanal always support BR/EDR mode, this function implements
  // the feature requirements from the subsection 1. Devices supporting BR/EDR.
  //
  // Note: the feature requirements were introduced in version v5.1 of the
  // specification, for previous versions it is assumed that the same
  // requirements apply for the subset of defined feature bits.

  // The features listed in Table 3.5 are mandatory in this version of the
  // specification (see Section 3.1) and these feature bits shall be set.
  if (!SupportsLMPFeature(LMPFeaturesPage0Bits::ENCRYPTION) ||
      !SupportsLMPFeature(LMPFeaturesPage0Bits::SECURE_SIMPLE_PAIRING_CONTROLLER) ||
      !SupportsLMPFeature(LMPFeaturesPage0Bits::ENCAPSULATED_PDU)) {
    INFO("Table 3.5 validation failed");
    return false;
  }

  // The features listed in Table 3.6 are forbidden in this version of the
  // specification and these feature bits shall not be set.
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::BR_EDR_NOT_SUPPORTED)) {
    INFO("Table 3.6 validation failed");
    return false;
  }

  // For each row of Table 3.7, either every feature named in that row shall be
  // supported or none of the features named in that row shall be supported.
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::SNIFF_MODE) !=
      SupportsLMPFeature(LMPFeaturesPage0Bits::SNIFF_SUBRATING)) {
    INFO("Table 3.7 validation failed");
    return false;
  }

  // For each row of Table 3.8, not more than one feature in that row shall be
  // supported.
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::BROADCAST_ENCRYPTION) &&
      SupportsLMPFeature(LMPFeaturesPage2Bits::COARSE_CLOCK_ADJUSTMENT)) {
    INFO("Table 3.8 validation failed");
    return false;
  }

  // For each row of Table 3.9, if the feature named in the first column is
  // supported then the feature named in the second column shall be supported.
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::ROLE_SWITCH) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::SLOT_OFFSET)) {
    INFO("Table 3.9 validation failed; expected Slot Offset");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::HV2_PACKETS) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::HV3_PACKETS) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::M_LAW_LOG_SYNCHRONOUS_DATA) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::SCO_LINK) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Sco Link or Extended Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::A_LAW_LOG_SYNCHRONOUS_DATA) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::SCO_LINK) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Sco Link or Extended Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::CVSD_SYNCHRONOUS_DATA) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::SCO_LINK) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Sco Link or Extended Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::TRANSPARENT_SYNCHRONOUS_DATA) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::SCO_LINK) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Sco Link or Extended Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ACL_3_MB_S_MODE) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ACL_2_MB_S_MODE)) {
    INFO("Table 3.9 validation failed; expected Enhanced Data Rate ACL 2Mb/s "
         "mode");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::EV4_PACKETS) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Extended Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::EV5_PACKETS) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Extended Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CLASSIFICATION_PERIPHERAL) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CAPABLE_PERIPHERAL)) {
    INFO("Table 3.9 validation failed; expected AFH Capable Peripheral");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::LMP_3_SLOT_ENHANCED_DATA_RATE_ACL_PACKETS) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ACL_2_MB_S_MODE)) {
    INFO("Table 3.9 validation failed; expected Enhanced Data Rate ACL 2Mb/s "
         "mode");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::LMP_5_SLOT_ENHANCED_DATA_RATE_ACL_PACKETS) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ACL_2_MB_S_MODE)) {
    INFO("Table 3.9 validation failed; expected Enhanced Data Rate ACL 2Mb/s "
         "mode");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CLASSIFICATION_CENTRAL) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CAPABLE_CENTRAL)) {
    INFO("Table 3.9 validation failed; expected AFH Capable Central");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ESCO_2_MB_S_MODE) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Extended Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ESCO_3_MB_S_MODE) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ESCO_2_MB_S_MODE)) {
    INFO("Table 3.9 validation failed; expected Enhanced Data Rate eSCO 2Mb/s "
         "mode");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::LMP_3_SLOT_ENHANCED_DATA_RATE_ESCO_PACKETS) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ESCO_2_MB_S_MODE)) {
    INFO("Table 3.9 validation failed; expected Enhanced Data Rate eSCO 2Mb/s "
         "mode");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_INQUIRY_RESPONSE) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::RSSI_WITH_INQUIRY_RESULTS)) {
    INFO("Table 3.9 validation failed; expected RSSI with Inquiry Results");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::SIMULTANEOUS_LE_AND_BR_CONTROLLER) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::LE_SUPPORTED_CONTROLLER)) {
    INFO("Table 3.9 validation failed; expected LE Supported (Controller)");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::ERRONEOUS_DATA_REPORTING) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::SCO_LINK) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK)) {
    INFO("Table 3.9 validation failed; expected Sco Link or Extended Sco Link");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_POWER_CONTROL) &&
      (!SupportsLMPFeature(LMPFeaturesPage0Bits::POWER_CONTROL_REQUESTS) ||
       !SupportsLMPFeature(LMPFeaturesPage0Bits::POWER_CONTROL))) {
    INFO("Table 3.9 validation failed; expected Power Control Request and Power "
         "Control");
    return false;
  }
  if (SupportsLMPFeature(
              LMPFeaturesPage2Bits::CONNECTIONLESS_PERIPHERAL_BROADCAST_TRANSMITTER_OPERATION) &&
      !SupportsLMPFeature(LMPFeaturesPage2Bits::SYNCHRONIZATION_TRAIN)) {
    INFO("Table 3.9 validation failed; expected Synchronization Train");
    return false;
  }
  if (SupportsLMPFeature(
              LMPFeaturesPage2Bits::CONNECTIONLESS_PERIPHERAL_BROADCAST_RECEIVER_OPERATION) &&
      !SupportsLMPFeature(LMPFeaturesPage2Bits::SYNCHRONIZATION_SCAN)) {
    INFO("Table 3.9 validation failed; expected Synchronization Scan");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage2Bits::GENERALIZED_INTERLACED_SCAN) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::INTERLACED_INQUIRY_SCAN) &&
      !SupportsLMPFeature(LMPFeaturesPage0Bits::INTERLACED_PAGE_SCAN)) {
    INFO("Table 3.9 validation failed; expected Interlaced Inquiry Scan or "
         "Interlaced Page Scan");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage2Bits::COARSE_CLOCK_ADJUSTMENT) &&
      (!SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CAPABLE_PERIPHERAL) ||
       !SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CAPABLE_CENTRAL) ||
       !SupportsLMPFeature(LMPFeaturesPage2Bits::SYNCHRONIZATION_TRAIN) ||
       !SupportsLMPFeature(LMPFeaturesPage2Bits::SYNCHRONIZATION_SCAN))) {
    INFO("Table 3.9 validation failed; expected AFH Capable Central/Peripheral "
         "and Synchronization Train/Scan");
    return false;
  }
  if (SupportsLMPFeature(LMPFeaturesPage2Bits::SECURE_CONNECTIONS_CONTROLLER_SUPPORT) &&
      (!SupportsLMPFeature(LMPFeaturesPage0Bits::PAUSE_ENCRYPTION) ||
       !SupportsLMPFeature(LMPFeaturesPage2Bits::PING))) {
    INFO("Table 3.9 validation failed; expected Pause Encryption and Ping");
    return false;
  }

  return true;
}

bool ControllerProperties::CheckSupportedCommands() const {
  // Vol 4, Part E § 3 Overview of commands and events.
  //
  // A Controller shall support the command or event if it is shown as mandatory
  // for at least one of the transports (i.e. BR/EDR or LE) that the Controller
  // supports, otherwise the Controller may support the command or event if it
  // is shown as optional for at least one of the transports that the Controller
  // supports, otherwise it shall not support the command or event.
  //
  // RootCanal always support BR/EDR and LE modes, this function implements
  // the feature requirements from both BR/EDR and LE commands.

  // Some controller features are always set as supported in the RootCanal
  // controller:
  //  - The controller supports transmitting packets.
  //  - The controller supports receiving packets.
  //  - The controller supports Connection State.
  //  - The controller supports Initiating State.
  //  - The controller supports Synchronization State.
  //  - The controller supports Scanning State.
  //  - The controller supports Advertising State.
  //  - The controller supports Central Role.
  //  - The controller supports Peripheral Role.
  //  - The controller supports LE transport.
  //  - The controller supports Inquiry.
  // Some controller features are always set as not supported in the RootCanal
  // controller:
  //  - The controller can not change its sleep clock accuracy.
  //  - The controller does not support Test Mode.
  //  - The controller does not support Data block based flow control.
  //  - The controller does not support Truncated Page State.

  enum Requirement {
    kMandatory,
    kOptional,
    kExcluded,
  };

  constexpr auto mandatory = kMandatory;
  constexpr auto optional = kOptional;
  constexpr auto excluded = kExcluded;
  auto mandatory_or_excluded = [](bool cond) { return cond ? kMandatory : kExcluded; };
  auto mandatory_or_optional = [](bool cond) { return cond ? kMandatory : kOptional; };
  auto optional_or_excluded = [](bool cond) { return cond ? kMandatory : kExcluded; };
  auto mandatory_or_optional_or_excluded = [](bool cond1, bool cond2) {
    return cond1 ? kMandatory : cond2 ? kOptional : kExcluded;
  };

  // A Controller shall support the command or event if it is shown as
  // mandatory for at least one of the transports (i.e. BR/EDR or LE) that
  // the Controller supports, otherwise the Controller may support the command
  // or event if it is shown as optional for at least one of the transports
  // that the Controller supports, otherwise it shall not support the
  // command or event.
  auto check_command_requirement = [](bool br_supported, Requirement br_requirement,
                                      bool le_supported, Requirement le_requirement,
                                      bool command_supported) {
    Requirement command_requirement =
            !br_supported                                                  ? le_requirement
            : !le_supported                                                ? br_requirement
            : le_requirement == kMandatory || br_requirement == kMandatory ? kMandatory
            : le_requirement == kOptional || br_requirement == kOptional   ? kOptional
                                                                           : kExcluded;

    if (command_requirement == kMandatory && !command_supported) {
      return false;
    }
    if (command_requirement == kExcluded && command_supported) {
      return false;
    }
    return true;
  };

  // C1: Mandatory if the LE Controller supports transmitting packets, otherwise
  // excluded.
  auto c1 = mandatory;
  // C2: Mandatory if the LE Controller supports receiving packets, otherwise
  // excluded.
  auto c2 = mandatory;
  // C3: Mandatory if the LE Controller supports Connection State, otherwise
  // excluded.
  auto c3 = mandatory;
  // C4: Mandatory if LE Feature (LE Encryption) is supported, otherwise
  // excluded.
  auto c4 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_ENCRYPTION));
  // C6: Mandatory if LE Feature (Connection Parameters Request procedure) is
  // supported, otherwise excluded.
  auto c6 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::CONNECTION_PARAMETERS_REQUEST_PROCEDURE));
  // C7: Mandatory if LE Feature (LE Encryption) and LE Feature (LE Ping) are
  // supported, otherwise excluded.
  auto c7 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_ENCRYPTION) &&
                                  SupportsLLFeature(LLFeaturesBits::LE_PING));
  // C8: Mandatory if LE Feature (LE Data Packet Length Extension) is supported,
  // otherwise optional.
  auto c8 =
          mandatory_or_optional(SupportsLLFeature(LLFeaturesBits::LE_DATA_PACKET_LENGTH_EXTENSION));
  // C9: Mandatory if LE Feature (LL Privacy) is supported, otherwise excluded.
  auto c9 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LL_PRIVACY));
  // C10: Optional if LE Feature (LL Privacy) is supported, otherwise excluded.
  auto c10 = optional_or_excluded(SupportsLLFeature(LLFeaturesBits::LL_PRIVACY));
  // C11: Mandatory if LE Feature (LE 2M PHY) or LE Feature (LE Coded PHY) is
  // supported, otherwise optional.
  auto c11 = mandatory_or_optional(SupportsLLFeature(LLFeaturesBits::LE_2M_PHY) ||
                                   SupportsLLFeature(LLFeaturesBits::LE_CODED_PHY));
  // C12: Mandatory if LE Feature (LE 2M PHY) or LE Feature (LE Coded PHY) or
  // LE Feature (Stable Modulation Index - Transmitter) is supported, otherwise
  // optional if the LE Controller supports transmitting packets, otherwise
  // excluded.
  auto c12 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::LE_2M_PHY) ||
          SupportsLLFeature(LLFeaturesBits::LE_CODED_PHY) ||
          SupportsLLFeature(LLFeaturesBits::STABLE_MODULATION_INDEX_TRANSMITTER));
  // C13: Mandatory if LE Feature (LE 2M PHY) or LE Feature (LE Coded PHY) or LE
  // Feature (Stable Modulation Index - Receiver) is supported, otherwise
  // optional if the LE Controller supports receiving packets, otherwise
  // excluded.
  auto c13 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::LE_2M_PHY) ||
          SupportsLLFeature(LLFeaturesBits::LE_CODED_PHY) ||
          SupportsLLFeature(LLFeaturesBits::STABLE_MODULATION_INDEX_RECEIVER));
  // C15: Mandatory if LE Controller supports transmitting scannable
  // advertisements, otherwise excluded.
  auto c15 = mandatory;
  // C16: Mandatory if LE Feature (Periodic Advertising) is supported and the LE
  // Controller supports both Scanning State and Synchronization State,
  // otherwise excluded.
  auto c16 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_PERIODIC_ADVERTISING));
  // C17: Mandatory if LE Feature (Extended Advertising) is supported and the LE
  // Controller supports Advertising State, otherwise excluded.
  auto c17 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_EXTENDED_ADVERTISING));
  // C18: Mandatory if LE Feature (Periodic Advertising) is supported and the LE
  // Controller supports Advertising State, otherwise excluded.
  auto c18 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_PERIODIC_ADVERTISING));
  // C19: Mandatory if LE Feature (Extended Advertising) is supported and the LE
  // Controller supports Scanning State, otherwise excluded.
  auto c19 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_EXTENDED_ADVERTISING));
  // C20: Mandatory if LE Feature (Extended Advertising) is supported and the LE
  // Controller supports Initiating State, otherwise excluded.
  auto c20 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_EXTENDED_ADVERTISING));
  // C21: Mandatory if LE Feature (Periodic Advertising) is supported and the LE
  // Controller supports Synchronization State, otherwise excluded.
  auto c21 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_PERIODIC_ADVERTISING));
  // C22: Mandatory if the LE Controller supports sending Transmit Power in
  // advertisements or if LE Feature (LE Power Control Request) is supported,
  // otherwise optional.
  auto c22 = mandatory;
  // C23: Mandatory if LE Feature (LE Channel Selection Algorithm #2) is
  // supported, otherwise excluded.
  //
  // C24: Mandatory if the LE Controller supports
  // Connection State and either LE Feature (LL Privacy) or LE Feature (Extended
  // Advertising) is supported, otherwise optional if the LE Controller supports
  // Connection State, otherwise excluded.
  //
  // C25: Mandatory if LE Feature
  // (Connection CTE Request) is supported, otherwise excluded.
  auto c25 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::CONNECTION_CTE_REQUEST));
  // C26: Mandatory if LE Feature (Connection CTE Response) is supported,
  // otherwise excluded.
  auto c26 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::CONNECTION_CTE_RESPONSE));
  // C27: Mandatory if LE Feature (Connectionless CTE Transmitter) is supported,
  // otherwise excluded.
  auto c27 =
          mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::CONNECTIONLESS_CTE_TRANSMITTER));
  // C28: Mandatory if LE Feature (Connectionless CTE Receiver) is supported,
  // otherwise excluded.
  auto c28 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::CONNECTIONLESS_CTE_RECEIVER));
  // C29: Mandatory if LE Feature (Connection CTE Response) or LE Feature
  // (Connectionless CTE Transmitter) is supported, otherwise optional if the LE
  // Controller supports transmitting packets, otherwise excluded.
  auto c29 =
          mandatory_or_optional(SupportsLLFeature(LLFeaturesBits::CONNECTION_CTE_RESPONSE) ||
                                SupportsLLFeature(LLFeaturesBits::CONNECTIONLESS_CTE_TRANSMITTER));
  // C30: Mandatory if LE Feature (Connection CTE Request) or LE Feature
  // (Connectionless CTE Receiver) is supported, otherwise optional if the LE
  // Controller supports receiving packets, otherwise excluded.
  auto c30 = mandatory_or_optional(SupportsLLFeature(LLFeaturesBits::CONNECTION_CTE_REQUEST) ||
                                   SupportsLLFeature(LLFeaturesBits::CONNECTIONLESS_CTE_RECEIVER));
  // C31: Mandatory if LE Feature (Connection CTE Request) or LE Feature
  // (Connection CTE Response) or LE Feature (Connectionless CTE Transmitter) or
  // LE Feature (Connectionless CTE Receiver) is supported, otherwise excluded.
  auto c31 =
          mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::CONNECTION_CTE_REQUEST) ||
                                SupportsLLFeature(LLFeaturesBits::CONNECTION_CTE_RESPONSE) ||
                                SupportsLLFeature(LLFeaturesBits::CONNECTIONLESS_CTE_TRANSMITTER) ||
                                SupportsLLFeature(LLFeaturesBits::CONNECTIONLESS_CTE_RECEIVER));
  // C32: Mandatory if LE Feature (Periodic Advertising Sync Transfer –
  // Recipient) is supported, otherwise optional if LE Feature (Periodic
  // Advertising) is supported and the LE Controller supports Synchronization
  // State, otherwise excluded.
  auto c32 = mandatory_or_optional_or_excluded(
          SupportsLLFeature(LLFeaturesBits::PERIODIC_ADVERTISING_SYNC_TRANSFER_RECIPIENT),
          SupportsLLFeature(LLFeaturesBits::LE_PERIODIC_ADVERTISING));
  // C33: Mandatory if LE Feature (Periodic Advertising Sync Transfer – Sender)
  // is supported and the LE Controller supports Scanning State, otherwise
  // excluded.
  auto c33 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::PERIODIC_ADVERTISING_SYNC_TRANSFER_SENDER));
  // C34: Mandatory if LE Feature (Periodic Advertising Sync Transfer – Sender)
  // is supported and the LE Controller supports Advertising State, otherwise
  // excluded.
  auto c34 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::PERIODIC_ADVERTISING_SYNC_TRANSFER_SENDER));
  // C35: Mandatory if LE Feature (Periodic Advertising Sync Transfer –
  // Recipient) is supported, otherwise excluded.
  auto c35 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::PERIODIC_ADVERTISING_SYNC_TRANSFER_RECIPIENT));
  // C36: Mandatory if the LE Controller supports Central role or supports both
  // Peripheral role and LE Feature (Channel Classification), otherwise optional
  // if LE Feature (Extended Advertising) is supported and the LE Controller
  // supports Advertising State or if LE Feature (Isochronous Broadcaster) is
  // supported, otherwise excluded.
  auto c36 = mandatory;
  // C37: Mandatory if the LE Controller can change its sleep clock accuracy,
  // otherwise excluded.
  auto c37 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::SLEEP_CLOCK_ACCURACY_UPDATES));
  // C38: Mandatory if LE Feature (Connected Isochronous Stream - Central) or
  // LE Feature (Connected Isochronous Stream - Peripheral) is supported,
  // otherwise excluded.
  //
  // C39: Mandatory if LE Feature (Connected Isochronous
  // Stream - Central) is supported, otherwise excluded.
  auto c39 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL));
  // C40: Mandatory if LE Feature (Connected Isochronous Stream - Peripheral) is
  // supported, otherwise excluded.
  auto c40 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL));
  // C41: Mandatory if LE Feature (Isochronous Broadcaster) is supported,
  // otherwise excluded.
  auto c41 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::ISOCHRONOUS_BROADCASTER));
  // C42: Mandatory if LE Feature (Synchronized Receiver role) is supported,
  // otherwise excluded.
  auto c42 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::SYNCHRONIZED_RECEIVER));
  // C44: Mandatory if LE Feature (Sleep Clock Accuracy Updates) and either LE
  // Feature (Connected Isochronous Stream - Central) or LE Feature (Connected
  // Isochronous Stream - Peripheral) are supported, otherwise optional if LE
  // Feature (Sleep Clock Accuracy Updates) is supported, otherwise excluded.
  auto c44 = mandatory_or_optional_or_excluded(
          SupportsLLFeature(LLFeaturesBits::SLEEP_CLOCK_ACCURACY_UPDATES) &&
                  (SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL) ||
                   SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL)),
          SupportsLLFeature(LLFeaturesBits::SLEEP_CLOCK_ACCURACY_UPDATES));
  // C45: Mandatory if LE Feature (Connected Isochronous Stream - Central), or
  // LE Feature (Connected Isochronous Stream - Peripheral), or
  // LE Feature (Isochronous Broadcaster) is supported, otherwise excluded.
  auto c45 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL) ||
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL) ||
          SupportsLLFeature(LLFeaturesBits::ISOCHRONOUS_BROADCASTER));
  // C46: Mandatory if LE Feature (Connected Isochronous Stream - Central), or
  // LE Feature (Connected Isochronous Stream - Peripheral), or
  // LE Feature (Synchronized Receiver role) is supported, otherwise excluded.
  auto c46 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL) ||
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL) ||
          SupportsLLFeature(LLFeaturesBits::SYNCHRONIZED_RECEIVER));
  // C47: Mandatory if LE Feature (Connected Isochronous Stream - Central), or
  // LE Feature (Connected Isochronous Stream - Peripheral), or
  // LE Feature (Isochronous Broadcaster), or
  // LE Feature (Synchronized Receiver role) is supported, otherwise excluded.
  auto c47 = mandatory_or_excluded(
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL) ||
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL) ||
          SupportsLLFeature(LLFeaturesBits::ISOCHRONOUS_BROADCASTER) ||
          SupportsLLFeature(LLFeaturesBits::SYNCHRONIZED_RECEIVER));
  // C49: Mandatory if LE Feature (Connected Isochronous Stream - Central) or
  // LE Feature (Connected Isochronous Stream - Peripheral) or
  // LE Feature (Connection Subrating) is supported, otherwise optional.
  auto c49 = mandatory_or_optional(
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL) ||
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL) ||
          SupportsLLFeature(LLFeaturesBits::CONNECTION_SUBRATING));
  // C50: Optional if LE Feature (Connected Isochronous Stream - Central), or
  // LE Feature (Connected Isochronous Stream - Peripheral), or
  // LE Feature (Synchronized Receiver role) is supported, otherwise excluded.
  auto c50 = optional_or_excluded(
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL) ||
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL) ||
          SupportsLLFeature(LLFeaturesBits::SYNCHRONIZED_RECEIVER));
  // C51: Mandatory if LE Feature (LE Power Control Request) is supported,
  // otherwise excluded.
  auto c51 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_POWER_CONTROL_REQUEST));
  // C52: Mandatory if LE Feature (LE Path Loss Monitoring) is supported,
  // otherwise excluded.
  auto c52 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_PATH_LOSS_MONITORING));
  // C53: Mandatory if LE Feature (LE Power Control Request) is supported,
  // otherwise optional if the LE Controller supports transmitting packets,
  // otherwise excluded.
  auto c53 = mandatory_or_optional(SupportsLLFeature(LLFeaturesBits::LE_POWER_CONTROL_REQUEST));
  // C54: Mandatory if LE Feature (Synchronized Receiver) is supported,
  // otherwise optional.
  //
  // C55: Mandatory if LE Feature (Connected Isochronous
  // Stream - Central), or LE Feature (Connected Isochronous Stream -
  // Peripheral), or LE Feature (Isochronous Broadcaster) is supported,
  // otherwise optional if the LE Controller supports Connection State,
  // otherwise excluded.
  auto c55 = mandatory_or_optional(
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL) ||
          SupportsLLFeature(LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL) ||
          SupportsLLFeature(LLFeaturesBits::ISOCHRONOUS_BROADCASTER));
  // C56: Optional if LE Feature (LE Encryption) is supported, otherwise
  // excluded.
  //
  // C57: Mandatory if LE Feature (Connection Subrating) is supported,
  // otherwise excluded.
  auto c57 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::CONNECTION_SUBRATING));
  // C58: Mandatory if LE Feature (Channel Classification) is supported,
  // otherwise excluded.
  auto c58 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::CHANNEL_CLASSIFICATION));
  // C59: Mandatory if the LE Controller supports Central role, otherwise
  // excluded.
  auto c59 = mandatory;
  // C60: Mandatory if the LE Controller supports Central role and LE Feature
  // (LE Encryption), otherwise excluded.
  auto c60 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_ENCRYPTION));
  // C61: Mandatory if the LE Controller supports Peripheral role and LE Feature
  // (LE Encryption), otherwise excluded.
  auto c61 = mandatory_or_excluded(SupportsLLFeature(LLFeaturesBits::LE_ENCRYPTION));
  // C62: Mandatory if the LE Controller supports Central role or supports both
  // Peripheral role and LE Feature (Connection Parameters Request Procedure),
  // otherwise excluded.
  auto c62 = mandatory;
  // C63: Mandatory if the LE Controller supports Scanning state and LE Feature
  // (LL Privacy), otherwise excluded.
  //
  // C64: Optional if the Controller supports
  // transmitting packets, otherwise excluded.
  auto c64 = optional;
  // C94: Mandatory if the LE Create Connection or LE Extended Create Connection
  // command is supported, otherwise excluded.
  auto c94 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::LE_CREATE_CONNECTION) ||
                                   SupportsCommand(OpCodeIndex::LE_EXTENDED_CREATE_CONNECTION_V1));
  // C95: Mandatory if the LE Request Peer SCA command is supported, otherwise
  // excluded.
  //
  // C96: Optional if the LE Controller supports Connection State,
  // otherwise excluded.
  auto c96 = optional;
  // C97: Mandatory if Advertising State is supported, otherwise excluded.
  auto c97 = mandatory;
  // C98: Mandatory if Scanning State is supported, otherwise excluded.
  auto c98 = mandatory;
  // C99: Mandatory if LE Generate DHKey command [v2] is supported, otherwise
  // optional.
  auto c99 = mandatory_or_optional(SupportsCommand(OpCodeIndex::LE_GENERATE_DHKEY_V2));
  // C101: Mandatory if the Authentication Requested command is supported,
  // otherwise excluded.
  //
  // C102: Mandatory if the Change Connection Link Key command is supported,
  // otherwise excluded.
  //
  // C103: Mandatory if the Periodic
  // Inquiry Mode command is supported, otherwise excluded.
  auto c103 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::PERIODIC_INQUIRY_MODE));
  // C104: Mandatory if the Read Clock Offset command is supported, otherwise
  // excluded.
  //
  // C105: Mandatory if the Read Remote Version Information command is
  // supported, otherwise excluded.
  //
  // C106: Mandatory if the Remote Name Request
  // command is supported, otherwise excluded.
  auto c106 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::REMOTE_NAME_REQUEST));
  // C107: Mandatory if the Set Controller To Host Flow Control command is
  // supported, otherwise excluded.
  auto c107 =
          mandatory_or_excluded(SupportsCommand(OpCodeIndex::SET_CONTROLLER_TO_HOST_FLOW_CONTROL));
  // C108: Mandatory if the Set MWS_PATTERN Configuration command is supported,
  // otherwise optional.
  auto c108 = mandatory_or_optional(SupportsCommand(OpCodeIndex::SET_MWS_PATTERN_CONFIGURATION));
  // C109: Mandatory if the Set MWS Signaling command is supported, otherwise
  // excluded.
  auto c109 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::SET_MWS_SIGNALING));
  // C110: Mandatory if the Set Triggered Clock Capture command is supported,
  // otherwise excluded.
  //
  // C111: Mandatory if the Write Authentication Enable
  // command is supported, otherwise excluded.
  auto c111 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_AUTHENTICATION_ENABLE));
  // C112: Mandatory if the Write Default Erroneous Data Reporting command is
  // supported, otherwise excluded.
  auto c112 = mandatory_or_excluded(
          SupportsCommand(OpCodeIndex::WRITE_DEFAULT_ERRONEOUS_DATA_REPORTING));
  // C113: Mandatory if the Write Extended Inquiry Length command is supported,
  // otherwise excluded.
  auto c113 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_EXTENDED_INQUIRY_LENGTH));
  // C114: Mandatory if the Write Extended Page Timeout command is supported,
  // otherwise excluded.
  auto c114 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_EXTENDED_PAGE_TIMEOUT));
  // C115: Mandatory if the Write Inquiry Mode command is supported, otherwise
  // excluded.
  auto c115 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_INQUIRY_MODE));
  // C116: Mandatory if the Write LE Host Support command is supported,
  // otherwise excluded.
  auto c116 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_LE_HOST_SUPPORT));
  // C117: Mandatory if the Write Link Supervision Timeout command is supported,
  // otherwise excluded.
  auto c117 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_LINK_SUPERVISION_TIMEOUT));
  // C118: Mandatory if the Write Num Broadcast Retransmissions command is
  // supported, otherwise excluded.
  auto c118 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_NUM_BROADCAST_RETRANSMITS));
  // C119: Mandatory if the Write Page Scan Type command is supported, otherwise
  // excluded.
  auto c119 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_PAGE_SCAN_TYPE));
  // C120: Mandatory if the Write PIN Type command is supported, otherwise
  // excluded.
  auto c120 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_PIN_TYPE));
  // C121: Mandatory if the Write Stored Link Key command is supported,
  // otherwise excluded.
  auto c121 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_STORED_LINK_KEY));
  // C122: Mandatory if the Write Synchronous Flow Control Enable command is
  // supported, otherwise excluded.
  auto c122 = mandatory_or_excluded(
          SupportsCommand(OpCodeIndex::WRITE_SYNCHRONOUS_FLOW_CONTROL_ENABLE));
  // C123: Mandatory if BR/EDR test mode is supported, otherwise excluded.
  auto c123 = mandatory;
  // C124: Mandatory if Data block based flow control is supported, otherwise
  // excluded.
  auto c124 = excluded;
  // C125: Mandatory if Inquiry Scan is supported, otherwise excluded.
  auto c125 = mandatory;
  // C126: Optional if Inquiry Scan is supported, otherwise excluded.
  //
  // C127: Mandatory if Inquiry is supported, otherwise excluded.
  auto c127 = mandatory;
  // C128: Optional if Inquiry is supported, otherwise excluded.
  auto c128 = optional;
  // C129: Mandatory if Truncated page state is supported, otherwise excluded.
  auto c129 = excluded;
  // C132: Mandatory if multi-slot ACL packets are is supported, otherwise
  // excluded.
  //
  // C133: Mandatory if HV2, HV3, or multi-slot or EDR ACL packets are
  // supported, otherwise excluded.
  auto c133 = mandatory_or_excluded(
          SupportsLMPFeature(LMPFeaturesPage0Bits::HV2_PACKETS) ||
          SupportsLMPFeature(LMPFeaturesPage0Bits::HV3_PACKETS) ||
          SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ACL_2_MB_S_MODE) ||
          SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_DATA_RATE_ACL_3_MB_S_MODE) ||
          SupportsLMPFeature(LMPFeaturesPage0Bits::LMP_3_SLOT_ENHANCED_DATA_RATE_ACL_PACKETS));
  // C134: Mandatory if SCO or eSCO is supported, otherwise excluded.
  auto c134 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::SCO_LINK) ||
                                    SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK));
  // C135: Optional if SCO or eSCO is supported, otherwise excluded.
  auto c135 = optional_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::SCO_LINK) ||
                                   SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK));
  // C136: Optional if Slot Availability Mask is supported, otherwise excluded.
  auto c136 =
          optional_or_excluded(SupportsLMPFeature(LMPFeaturesPage2Bits::SLOT_AVAILABILITY_MASK));
  // C138: Mandatory if Secure Connections (Controller) is supported, otherwise
  // optional if eSCO is supported, otherwise excluded.
  auto c138 = mandatory_or_optional_or_excluded(
          SupportsLMPFeature(LMPFeaturesPage2Bits::SECURE_CONNECTIONS_CONTROLLER_SUPPORT),
          SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_SCO_LINK));
  // C139: Mandatory if the Controller is AFH capable in either role, otherwise
  // excluded.
  auto c139 =
          mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CAPABLE_CENTRAL) ||
                                SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CAPABLE_PERIPHERAL));
  // C140: Mandatory if the Controller supports AFH classification in either
  // role or is an AFH capable Central, otherwise excluded.
  auto c140 = mandatory_or_excluded(
          SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CLASSIFICATION_CENTRAL) ||
          SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CLASSIFICATION_PERIPHERAL) ||
          SupportsLMPFeature(LMPFeaturesPage0Bits::AFH_CAPABLE_CENTRAL));
  // C141: Mandatory if Role Switch, Hold mode, or Sniff mode is supported,
  // otherwise excluded.
  auto c141 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::ROLE_SWITCH) ||
                                    SupportsLMPFeature(LMPFeaturesPage0Bits::HOLD_MODE) ||
                                    SupportsLMPFeature(LMPFeaturesPage0Bits::SNIFF_MODE));
  // C142: Mandatory if Secure Connections (Host) is supported, otherwise
  // excluded.
  auto c142 = mandatory;
  // C143: Mandatory if Secure Connections (both Host and Controller) is
  // supported, otherwise excluded.
  auto c143 = mandatory_or_excluded(
          SupportsLMPFeature(LMPFeaturesPage2Bits::SECURE_CONNECTIONS_CONTROLLER_SUPPORT));
  // C144: Mandatory if Hold Mode or Sniff Mode is supported, otherwise
  // excluded.
  //
  // C145: Mandatory if any event in event mask page 2 is supported,
  // otherwise optional.
  auto c145 = mandatory;
  // C146: Mandatory if the Extended Inquiry Result event or the IO Capability
  // Request event is supported, otherwise optional if Inquiry is supported,
  // otherwise excluded.
  auto c146 = mandatory;
  // C147: Optional if the Inquiry Result with RSSI event is supported,
  // otherwise excluded.
  //
  // C148: Optional if any of the Connection Complete,
  // Connection Request, Extended Inquiry Result, Inquiry Result with RSSI, IO
  // Capability Request, or Synchronous Connection Complete events is supported,
  // otherwise excluded.
  auto c148 = mandatory;
  // C151: Mandatory if Secure Connections (Controller) and Ping are supported,
  // otherwise excluded.
  auto c151 = mandatory_or_excluded(
          SupportsLMPFeature(LMPFeaturesPage2Bits::SECURE_CONNECTIONS_CONTROLLER_SUPPORT) &&
          SupportsLMPFeature(LMPFeaturesPage2Bits::PING));
  // C152: Mandatory if Power Control is supported, otherwise optional.
  auto c152 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::POWER_CONTROL));
  // C153: Mandatory if LE supported in the Controller, otherwise optional.
  auto c153 =
          mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::LE_SUPPORTED_CONTROLLER));
  // C154: Mandatory if Interlaced Page Scan is supported, otherwise optional.
  auto c154 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::INTERLACED_PAGE_SCAN));
  // C155: Mandatory if the Write Authenticated Payload Timeout command is
  // supported, otherwise excluded.
  auto c155 =
          mandatory_or_excluded(SupportsCommand(OpCodeIndex::WRITE_AUTHENTICATED_PAYLOAD_TIMEOUT));
  // C156: Mandatory if the Read Local Supported Codecs command [v2] is
  // supported, otherwise excluded.
  auto c156 = mandatory_or_excluded(SupportsCommand(OpCodeIndex::READ_LOCAL_SUPPORTED_CODECS_V2));
  // C157: Mandatory if the Read Local Supported Codecs command [v2] is
  // supported, otherwise optional.
  auto c157 = mandatory_or_optional(SupportsCommand(OpCodeIndex::READ_LOCAL_SUPPORTED_CODECS_V2));
  // C158: Mandatory if the Set Min Encryption Key Size command is supported,
  // otherwise optional.
  //
  // C201: Mandatory if Connectionless Peripheral Broadcast - Transmitter is
  // supported, otherwise excluded.
  auto c201 = mandatory_or_excluded(SupportsLMPFeature(
          LMPFeaturesPage2Bits::CONNECTIONLESS_PERIPHERAL_BROADCAST_TRANSMITTER_OPERATION));
  // C202: Mandatory if Connectionless Peripheral Broadcast - Receiver is
  // supported, otherwise excluded.
  auto c202 = mandatory_or_excluded(SupportsLMPFeature(
          LMPFeaturesPage2Bits::CONNECTIONLESS_PERIPHERAL_BROADCAST_RECEIVER_OPERATION));
  // C203: Mandatory if Synchronization Train is supported, otherwise excluded.
  auto c203 =
          mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage2Bits::SYNCHRONIZATION_TRAIN));
  // C204: Mandatory if Synchronization Scan is supported, otherwise excluded.
  auto c204 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage2Bits::SYNCHRONIZATION_SCAN));
  // C205: Mandatory if Extended Inquiry Response is supported, otherwise
  // excluded.
  auto c205 = mandatory_or_excluded(
          SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_INQUIRY_RESPONSE));
  // C212: Mandatory if Role Switch is supported, otherwise excluded.
  auto c212 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::ROLE_SWITCH));
  // C213: Mandatory if Hold mode is supported, otherwise excluded.
  auto c213 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::HOLD_MODE));
  // C214: Mandatory if Sniff mode is supported, otherwise excluded.
  auto c214 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::SNIFF_MODE));
  // C215: Mandatory if Broadcast Encryption is supported, otherwise excluded.
  auto c215 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::BROADCAST_ENCRYPTION));
  // C217: Mandatory if BR/EDR Enhanced Power Control is supported, otherwise
  // excluded.
  auto c217 =
          mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::ENHANCED_POWER_CONTROL));
  // C218: Mandatory if Secure Connections (Controller) is supported, otherwise
  // excluded.
  auto c218 = mandatory_or_excluded(
          SupportsLMPFeature(LMPFeaturesPage2Bits::SECURE_CONNECTIONS_CONTROLLER_SUPPORT));
  // C219: Mandatory if Slot Availability Mask is supported, otherwise excluded.
  // C220: Mandatory if LMP Extended Features mask is supported, otherwise
  // excluded.
  auto c220 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::EXTENDED_FEATURES));
  // C221: Mandatory if Sniff subrating is supported, otherwise excluded.
  auto c221 = mandatory_or_excluded(SupportsLMPFeature(LMPFeaturesPage0Bits::SNIFF_SUBRATING));

#define check_command_(op_code, br_requirement, le_requirement)                                \
  {                                                                                            \
    bool command_supported = SupportsCommand(bluetooth::hci::OpCodeIndex::op_code);            \
    if (!check_command_requirement(br_supported, br_requirement, le_supported, le_requirement, \
                                   command_supported)) {                                       \
      INFO(#op_code " command validation failed (" #br_requirement "," #le_requirement ")");   \
    }                                                                                          \
  }

  // Table 3.1: Alphabetical list of commands and events (Sheet 1 of 49)
  check_command_(ACCEPT_CONNECTION_REQUEST, mandatory, excluded);
  check_command_(ACCEPT_SYNCHRONOUS_CONNECTION, c134, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 2 of 49)
  check_command_(CHANGE_CONNECTION_PACKET_TYPE, c133, excluded);
  check_command_(CONFIGURE_DATA_PATH, c156, c156);
  // Table 3.1: Alphabetical list of commands and events (Sheet 3 of 49)
  check_command_(CREATE_CONNECTION_CANCEL, mandatory, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 4 of 49)
  check_command_(CREATE_CONNECTION, mandatory, excluded);
  check_command_(DELETE_RESERVED_LT_ADDR, c201, excluded);
  check_command_(DELETE_STORED_LINK_KEY, c121, excluded);
  check_command_(DISCONNECT, mandatory, c3);
  check_command_(ENABLE_IMPLEMENTATION_UNDER_TEST_MODE, c123, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 5 of 49)
  check_command_(ENHANCED_ACCEPT_SYNCHRONOUS_CONNECTION, c135, excluded);
  check_command_(ENHANCED_FLUSH, mandatory, excluded);
  check_command_(ENHANCED_SETUP_SYNCHRONOUS_CONNECTION, c135, excluded);
  check_command_(EXIT_PERIODIC_INQUIRY_MODE, c103, excluded);
  check_command_(EXIT_SNIFF_MODE, c214, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 6 of 49)
  check_command_(FLOW_SPECIFICATION, mandatory, excluded);
  check_command_(FLUSH, mandatory, excluded);
  check_command_(GET_MWS_TRANSPORT_LAYER_CONFIGURATION, c109, c109);
  check_command_(HOLD_MODE, c213, excluded);
  check_command_(HOST_BUFFER_SIZE, c107, c107);
  // Table 3.1: Alphabetical list of commands and events (Sheet 7 of 49)
  check_command_(HOST_NUMBER_OF_COMPLETED_PACKETS, c107, c107);
  check_command_(INQUIRY_CANCEL, c127, excluded);
  check_command_(INQUIRY, c127, excluded);
  check_command_(IO_CAPABILITY_REQUEST_NEGATIVE_REPLY, mandatory, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 8 of 49)
  check_command_(IO_CAPABILITY_REQUEST_REPLY, mandatory, excluded);
  check_command_(LE_ACCEPT_CIS_REQUEST, excluded, c40);
  check_command_(LE_ADD_DEVICE_TO_FILTER_ACCEPT_LIST, excluded, mandatory);
  check_command_(LE_ADD_DEVICE_TO_PERIODIC_ADVERTISER_LIST, excluded, c21);
  check_command_(LE_ADD_DEVICE_TO_RESOLVING_LIST, excluded, c9);
  // Table 3.1: Alphabetical list of commands and events (Sheet 9 of 49)
  check_command_(LE_BIG_CREATE_SYNC, excluded, c42);
  check_command_(LE_BIG_TERMINATE_SYNC, excluded, c42);
  check_command_(LE_CLEAR_ADVERTISING_SETS, excluded, c17);
  check_command_(LE_CLEAR_FILTER_ACCEPT_LIST, excluded, mandatory);
  check_command_(LE_CLEAR_PERIODIC_ADVERTISER_LIST, excluded, c21);
  check_command_(LE_CLEAR_RESOLVING_LIST, excluded, c9);
  // Table 3.1: Alphabetical list of commands and events (Sheet 10 of 49)
  check_command_(LE_CONNECTION_CTE_REQUEST_ENABLE, excluded, c25);
  check_command_(LE_CONNECTION_CTE_RESPONSE_ENABLE, excluded, c26);
  check_command_(LE_CONNECTION_UPDATE, excluded, c62);
  check_command_(LE_CREATE_BIG, excluded, c41);
  // Table 3.1: Alphabetical list of commands and events (Sheet 11 of 49)
  check_command_(LE_CREATE_BIG_TEST, excluded, c41);
  check_command_(LE_CREATE_CIS, excluded, c39);
  check_command_(LE_CREATE_CONNECTION_CANCEL, excluded, c94);
  check_command_(LE_CREATE_CONNECTION, excluded, c59);
  check_command_(LE_START_ENCRYPTION, excluded, c60);
  check_command_(LE_ENCRYPT, excluded, c4);
  // Table 3.1: Alphabetical list of commands and events (Sheet 12 of 49)
  check_command_(LE_ENHANCED_READ_TRANSMIT_POWER_LEVEL, excluded, c51);
  check_command_(LE_EXTENDED_CREATE_CONNECTION_V1, excluded, c20);
  check_command_(LE_GENERATE_DHKEY_V1, excluded, c99);
  check_command_(LE_GENERATE_DHKEY_V2, excluded, optional);
  check_command_(LE_ISO_READ_TEST_COUNTERS, excluded, c46);
  check_command_(LE_ISO_RECEIVE_TEST, excluded, c46);
  check_command_(LE_ISO_TEST_END, excluded, c47);
  // Table 3.1: Alphabetical list of commands and events (Sheet 13 of 49)
  check_command_(LE_ISO_TRANSMIT_TEST, excluded, c45);
  check_command_(LE_LONG_TERM_KEY_REQUEST_NEGATIVE_REPLY, excluded, c61);
  check_command_(LE_LONG_TERM_KEY_REQUEST_REPLY, excluded, c61);
  check_command_(LE_MODIFY_SLEEP_CLOCK_ACCURACY, excluded, c37);
  check_command_(LE_PERIODIC_ADVERTISING_CREATE_SYNC_CANCEL, excluded, c16);
  check_command_(LE_PERIODIC_ADVERTISING_CREATE_SYNC, excluded, c16);
  // Table 3.1: Alphabetical list of commands and events (Sheet 14 of 49)
  check_command_(LE_PERIODIC_ADVERTISING_SET_INFO_TRANSFER, excluded, c34);
  check_command_(LE_PERIODIC_ADVERTISING_SYNC_TRANSFER, excluded, c33);
  check_command_(LE_PERIODIC_ADVERTISING_TERMINATE_SYNC, excluded, c21);
  check_command_(LE_RAND, excluded, c4);
  check_command_(LE_READ_ADVERTISING_PHYSICAL_CHANNEL_TX_POWER, excluded, c97);
  // Table 3.1: Alphabetical list of commands and events (Sheet 15 of 49)
  check_command_(LE_READ_ANTENNA_INFORMATION, excluded, c31);
  check_command_(LE_READ_BUFFER_SIZE_V1, excluded, c3);
  check_command_(LE_READ_BUFFER_SIZE_V2, excluded, c55);
  check_command_(LE_READ_CHANNEL_MAP, excluded, c3);
  check_command_(LE_READ_FILTER_ACCEPT_LIST_SIZE, excluded, mandatory);
  check_command_(LE_READ_ISO_LINK_QUALITY, excluded, c50);
  check_command_(LE_READ_ISO_TX_SYNC, excluded, c45);
  check_command_(LE_READ_LOCAL_RESOLVABLE_ADDRESS, excluded, c10);
  // Table 3.1: Alphabetical list of commands and events (Sheet 16 of 49)
  check_command_(LE_READ_LOCAL_SUPPORTED_FEATURES_PAGE_0, excluded, mandatory);
  check_command_(LE_READ_MAXIMUM_ADVERTISING_DATA_LENGTH, excluded, c17);
  check_command_(LE_READ_MAXIMUM_DATA_LENGTH, excluded, c8);
  check_command_(LE_READ_NUMBER_OF_SUPPORTED_ADVERTISING_SETS, excluded, c17);
  check_command_(LE_READ_PEER_RESOLVABLE_ADDRESS, excluded, c10);
  check_command_(LE_READ_PERIODIC_ADVERTISER_LIST_SIZE, excluded, c21);
  check_command_(LE_READ_PHY, excluded, c11);
  check_command_(LE_READ_REMOTE_FEATURES_PAGE_0, excluded, c3);
  // Table 3.1: Alphabetical list of commands and events (Sheet 17 of 49)
  check_command_(LE_READ_REMOTE_TRANSMIT_POWER_LEVEL, excluded, c51);
  check_command_(LE_READ_RESOLVING_LIST_SIZE, excluded, c9);
  check_command_(LE_READ_RF_PATH_COMPENSATION_POWER, excluded, c22);
  check_command_(LE_READ_SUGGESTED_DEFAULT_DATA_LENGTH, excluded, c8);
  check_command_(LE_READ_SUPPORTED_STATES, excluded, mandatory);
  check_command_(LE_READ_TRANSMIT_POWER, excluded, c64);
  check_command_(LE_RECEIVER_TEST_V1, excluded, c2);
  check_command_(LE_RECEIVER_TEST_V2, excluded, c13);
  check_command_(LE_RECEIVER_TEST_V3, excluded, c30);
  // Table 3.1: Alphabetical list of commands and events (Sheet 18 of 49)
  check_command_(LE_REJECT_CIS_REQUEST, excluded, c40);
  check_command_(LE_REMOTE_CONNECTION_PARAMETER_REQUEST_NEGATIVE_REPLY, excluded, c6);
  check_command_(LE_REMOTE_CONNECTION_PARAMETER_REQUEST_REPLY, excluded, c6);
  check_command_(LE_REMOVE_ADVERTISING_SET, excluded, c17);
  check_command_(LE_REMOVE_CIG, excluded, c39);
  check_command_(LE_REMOVE_DEVICE_FROM_FILTER_ACCEPT_LIST, excluded, mandatory);
  check_command_(LE_REMOVE_DEVICE_FROM_PERIODIC_ADVERTISER_LIST, excluded, c21);
  check_command_(LE_REMOVE_DEVICE_FROM_RESOLVING_LIST, excluded, c9);
  // Table 3.1: Alphabetical list of commands and events (Sheet 19 of 49)
  check_command_(LE_REMOVE_ISO_DATA_PATH, excluded, c47);
  check_command_(LE_REQUEST_PEER_SCA, excluded, c44);
  check_command_(LE_SET_ADDRESS_RESOLUTION_ENABLE, excluded, c9);
  check_command_(LE_SET_ADVERTISING_DATA, excluded, c97);
  check_command_(LE_SET_ADVERTISING_ENABLE, excluded, c97);
  check_command_(LE_SET_ADVERTISING_PARAMETERS, excluded, c97);
  check_command_(LE_SET_ADVERTISING_SET_RANDOM_ADDRESS, excluded, c17);
  check_command_(LE_SET_CIG_PARAMETERS, excluded, c39);
  // Table 3.1: Alphabetical list of commands and events (Sheet 20 of 49)
  check_command_(LE_SET_CIG_PARAMETERS_TEST, excluded, c39);
  check_command_(LE_SET_CONNECTION_CTE_RECEIVE_PARAMETERS, excluded, c25);
  check_command_(LE_SET_CONNECTION_CTE_TRANSMIT_PARAMETERS, excluded, c26);
  check_command_(LE_SET_CONNECTIONLESS_CTE_TRANSMIT_ENABLE, excluded, c27);
  check_command_(LE_SET_CONNECTIONLESS_CTE_TRANSMIT_PARAMETERS, excluded, c27);
  check_command_(LE_SET_CONNECTIONLESS_IQ_SAMPLING_ENABLE, excluded, c28);
  check_command_(LE_SET_DATA_LENGTH, excluded, c8);
  // Table 3.1: Alphabetical list of commands and events (Sheet 21 of 49)
  check_command_(LE_SET_DATA_RELATED_ADDRESS_CHANGES, excluded, c10);
  check_command_(LE_SET_DEFAULT_PERIODIC_ADVERTISING_SYNC_TRANSFER_PARAMETERS, excluded, c35);
  check_command_(LE_SET_DEFAULT_PHY, excluded, c11);
  check_command_(LE_SET_DEFAULT_SUBRATE, excluded, c57);
  check_command_(LE_SET_EVENT_MASK, excluded, mandatory);
  check_command_(LE_SET_EXTENDED_ADVERTISING_DATA, excluded, c17);
  check_command_(LE_SET_EXTENDED_ADVERTISING_ENABLE, excluded, c17);
  check_command_(LE_SET_EXTENDED_ADVERTISING_PARAMETERS_V1, excluded, c17);
  check_command_(LE_SET_EXTENDED_SCAN_ENABLE, excluded, c19);
  // Table 3.1: Alphabetical list of commands and events (Sheet 22 of 49)
  check_command_(LE_SET_EXTENDED_SCAN_PARAMETERS, excluded, c19);
  check_command_(LE_SET_EXTENDED_SCAN_RESPONSE_DATA, excluded, c17);
  check_command_(LE_SET_HOST_CHANNEL_CLASSIFICATION, excluded, c36);
  check_command_(LE_SET_HOST_FEATURE_V1, excluded, c49);
  check_command_(LE_SET_PATH_LOSS_REPORTING_ENABLE, excluded, c52);
  check_command_(LE_SET_PATH_LOSS_REPORTING_PARAMETERS, excluded, c52);
  check_command_(LE_SET_PERIODIC_ADVERTISING_DATA, excluded, c18);
  check_command_(LE_SET_PERIODIC_ADVERTISING_ENABLE, excluded, c18);
  check_command_(LE_SET_PERIODIC_ADVERTISING_PARAMETERS_V1, excluded, c18);
  // Table 3.1: Alphabetical list of commands and events (Sheet 23 of 49)
  check_command_(LE_SET_PERIODIC_ADVERTISING_RECEIVE_ENABLE, excluded, c32);
  check_command_(LE_SET_PERIODIC_ADVERTISING_SYNC_TRANSFER_PARAMETERS, excluded, c35);
  check_command_(LE_SET_PHY, excluded, c11);
  check_command_(LE_SET_PRIVACY_MODE, excluded, c9);
  check_command_(LE_SET_RANDOM_ADDRESS, excluded, c1);
  check_command_(LE_SET_RESOLVABLE_PRIVATE_ADDRESS_TIMEOUT, excluded, c9);
  check_command_(LE_SET_SCAN_ENABLE, excluded, c98);
  check_command_(LE_SET_SCAN_PARAMETERS, excluded, c98);
  check_command_(LE_SET_SCAN_RESPONSE_DATA, excluded, c15);
  // Table 3.1: Alphabetical list of commands and events (Sheet 24 of 49)
  check_command_(LE_SET_TRANSMIT_POWER_REPORTING_ENABLE, excluded, c51);
  check_command_(LE_SETUP_ISO_DATA_PATH, excluded, c47);
  check_command_(LE_SUBRATE_REQUEST, excluded, c57);
  check_command_(LE_TERMINATE_BIG, excluded, c41);
  check_command_(LE_TEST_END, excluded, mandatory);
  check_command_(LE_TRANSMITTER_TEST_V1, excluded, c1);
  check_command_(LE_TRANSMITTER_TEST_V2, excluded, c12);
  check_command_(LE_TRANSMITTER_TEST_V3, excluded, c29);
  check_command_(LE_TRANSMITTER_TEST_V4, excluded, c53);
  // Table 3.1: Alphabetical list of commands and events (Sheet 25 of 49)
  check_command_(LE_WRITE_RF_PATH_COMPENSATION_POWER, excluded, c22);
  check_command_(LE_WRITE_SUGGESTED_DEFAULT_DATA_LENGTH, excluded, c8);
  check_command_(LINK_KEY_REQUEST_NEGATIVE_REPLY, mandatory, excluded);
  check_command_(LINK_KEY_REQUEST_REPLY, mandatory, excluded);
  check_command_(CENTRAL_LINK_KEY, c215, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 26 of 49)
  // Table 3.1: Alphabetical list of commands and events (Sheet 27 of 49)
  check_command_(PERIODIC_INQUIRY_MODE, c128, excluded);
  check_command_(PIN_CODE_REQUEST_NEGATIVE_REPLY, mandatory, excluded);
  check_command_(PIN_CODE_REQUEST_REPLY, mandatory, excluded);
  check_command_(QOS_SETUP, mandatory, excluded);
  check_command_(READ_AFH_CHANNEL_ASSESSMENT_MODE, c140, c58);
  // Table 3.1: Alphabetical list of commands and events (Sheet 28 of 49)
  check_command_(READ_AFH_CHANNEL_MAP, c139, excluded);
  check_command_(READ_AUTHENTICATED_PAYLOAD_TIMEOUT, c155, c155);
  check_command_(READ_AUTHENTICATION_ENABLE, c111, excluded);
  check_command_(READ_AUTOMATIC_FLUSH_TIMEOUT, mandatory, excluded);
  check_command_(READ_BD_ADDR, mandatory, mandatory);
  check_command_(READ_BUFFER_SIZE, mandatory, excluded);
  check_command_(READ_CLASS_OF_DEVICE, mandatory, excluded);
  check_command_(READ_CLOCK, optional, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 29 of 49)
  check_command_(READ_CLOCK_OFFSET, optional, excluded);
  check_command_(READ_CONNECTION_ACCEPT_TIMEOUT, mandatory, c40);
  check_command_(READ_CURRENT_IAC_LAP, c125, excluded);
  check_command_(READ_DATA_BLOCK_SIZE, c124, excluded);
  check_command_(READ_DEFAULT_ERRONEOUS_DATA_REPORTING, c112, excluded);
  check_command_(READ_DEFAULT_LINK_POLICY_SETTINGS, c141, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 30 of 49)
  check_command_(READ_ENCRYPTION_KEY_SIZE, mandatory, excluded);
  check_command_(READ_ENHANCED_TRANSMIT_POWER_LEVEL, c217, excluded);
  check_command_(READ_EXTENDED_INQUIRY_LENGTH, c113, excluded);
  check_command_(READ_EXTENDED_INQUIRY_RESPONSE, c205, excluded);
  check_command_(READ_EXTENDED_PAGE_TIMEOUT, c114, excluded);
  check_command_(READ_FAILED_CONTACT_COUNTER, mandatory, excluded);
  check_command_(READ_FLOW_CONTROL_MODE, c124, excluded);
  check_command_(READ_HOLD_MODE_ACTIVITY, c213, excluded);
  check_command_(READ_INQUIRY_MODE, c115, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 31 of 49)
  check_command_(READ_INQUIRY_RESPONSE_TRANSMIT_POWER_LEVEL, c125, excluded);
  check_command_(READ_INQUIRY_SCAN_ACTIVITY, c125, excluded);
  check_command_(READ_INQUIRY_SCAN_TYPE, c125, excluded);
  check_command_(READ_LE_HOST_SUPPORT, c116, c116);
  check_command_(READ_LINK_POLICY_SETTINGS, c141, excluded);
  check_command_(READ_LINK_QUALITY, optional, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 32 of 49)
  check_command_(READ_LINK_SUPERVISION_TIMEOUT, c117, excluded);
  check_command_(READ_LMP_HANDLE, c134, excluded);
  check_command_(READ_LOCAL_EXTENDED_FEATURES, c220, excluded);
  check_command_(READ_LOCAL_NAME, mandatory, excluded);
  check_command_(READ_LOCAL_OOB_DATA, mandatory, excluded);
  check_command_(READ_LOCAL_OOB_EXTENDED_DATA, c142, excluded);
  check_command_(READ_LOCAL_SIMPLE_PAIRING_OPTIONS, optional, excluded);
  check_command_(READ_LOCAL_SUPPORTED_CODEC_CAPABILITIES, c156, c156);
  check_command_(READ_LOCAL_SUPPORTED_CODECS_V1, c157, excluded);
  check_command_(READ_LOCAL_SUPPORTED_CODECS_V2, optional, optional);
  // Table 3.1: Alphabetical list of commands and events (Sheet 33 of 49)
  // check_command_(READ_LOCAL_SUPPORTED_COMMANDS, mandatory, mandatory);
  check_command_(READ_LOCAL_SUPPORTED_CONTROLLER_DELAY, c156, c156);
  check_command_(READ_LOCAL_SUPPORTED_FEATURES, mandatory, mandatory);
  check_command_(READ_LOCAL_VERSION_INFORMATION, mandatory, mandatory);
  check_command_(READ_LOOPBACK_MODE, c123, excluded);
  check_command_(READ_NUM_BROADCAST_RETRANSMITS, c118, excluded);
  check_command_(READ_NUMBER_OF_SUPPORTED_IAC, c125, excluded);
  check_command_(READ_PAGE_SCAN_ACTIVITY, mandatory, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 34 of 49)
  check_command_(READ_PAGE_SCAN_TYPE, c119, excluded);
  check_command_(READ_PAGE_TIMEOUT, mandatory, excluded);
  check_command_(READ_PIN_TYPE, c120, excluded);
  check_command_(READ_REMOTE_EXTENDED_FEATURES, c220, excluded);
  check_command_(READ_REMOTE_SUPPORTED_FEATURES, mandatory, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 35 of 49)
  check_command_(READ_REMOTE_VERSION_INFORMATION, optional, c3);
  check_command_(READ_RSSI, optional, c3);
  check_command_(READ_SCAN_ENABLE, mandatory, excluded);
  check_command_(READ_SECURE_CONNECTIONS_HOST_SUPPORT, c218, excluded);
  check_command_(READ_SIMPLE_PAIRING_MODE, mandatory, excluded);
  check_command_(READ_STORED_LINK_KEY, c121, excluded);
  check_command_(READ_SYNCHRONIZATION_TRAIN_PARAMETERS, c203, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 36 of 49)
  check_command_(READ_SYNCHRONOUS_FLOW_CONTROL_ENABLE, c122, excluded);
  check_command_(READ_TRANSMIT_POWER_LEVEL, c152, c3);
  check_command_(READ_VOICE_SETTING, c134, excluded);
  check_command_(RECEIVE_SYNCHRONIZATION_TRAIN, c204, excluded);
  check_command_(REFRESH_ENCRYPTION_KEY, mandatory, excluded);
  check_command_(REJECT_CONNECTION_REQUEST, mandatory, excluded);
  check_command_(REJECT_SYNCHRONOUS_CONNECTION, c134, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 37 of 49)
  check_command_(REMOTE_NAME_REQUEST_CANCEL, c106, excluded);
  check_command_(REMOTE_NAME_REQUEST, optional, excluded);
  check_command_(REMOTE_OOB_DATA_REQUEST_NEGATIVE_REPLY, mandatory, excluded);
  check_command_(REMOTE_OOB_DATA_REQUEST_REPLY, mandatory, excluded);
  check_command_(REMOTE_OOB_EXTENDED_DATA_REQUEST_REPLY, c143, excluded);
  check_command_(RESET, mandatory, mandatory);
  // Table 3.1: Alphabetical list of commands and events (Sheet 38 of 49)
  check_command_(RESET_FAILED_CONTACT_COUNTER, mandatory, excluded);
  check_command_(ROLE_DISCOVERY, optional, excluded);
  check_command_(SEND_KEYPRESS_NOTIFICATION, mandatory, excluded);
  check_command_(SET_AFH_HOST_CHANNEL_CLASSIFICATION, c140, excluded);
  check_command_(SET_CONNECTION_ENCRYPTION, mandatory, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 39 of 49)
  check_command_(SET_CONNECTIONLESS_PERIPHERAL_BROADCAST, c201, excluded);
  check_command_(SET_CONNECTIONLESS_PERIPHERAL_BROADCAST_DATA, c201, excluded);
  check_command_(SET_CONNECTIONLESS_PERIPHERAL_BROADCAST_RECEIVE, c202, excluded);
  check_command_(SET_CONTROLLER_TO_HOST_FLOW_CONTROL, optional, c96);
  check_command_(SET_ECOSYSTEM_BASE_INTERVAL, optional, optional);
  check_command_(SET_EVENT_FILTER, c148, excluded);
  check_command_(SET_EVENT_MASK, mandatory, mandatory);
  check_command_(SET_EVENT_MASK_PAGE_2, c145, c145);
  // Table 3.1: Alphabetical list of commands and events (Sheet 40 of 49)
  check_command_(SET_EXTERNAL_FRAME_CONFIGURATION, c108, optional);
  check_command_(SET_MIN_ENCRYPTION_KEY_SIZE, optional, excluded);
  check_command_(SET_MWS_CHANNEL_PARAMETERS, optional, optional);
  check_command_(SET_MWS_SCAN_FREQUENCY_TABLE, optional, optional);
  check_command_(SET_MWS_SIGNALING, optional, optional);
  check_command_(SET_MWS_TRANSPORT_LAYER, c109, c109);
  check_command_(SET_MWS_PATTERN_CONFIGURATION, c136, excluded);
  check_command_(SET_RESERVED_LT_ADDR, c201, excluded);
  check_command_(SET_TRIGGERED_CLOCK_CAPTURE, optional, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 41 of 49)
  check_command_(SETUP_SYNCHRONOUS_CONNECTION, c134, excluded);
  check_command_(SNIFF_MODE, c214, excluded);
  check_command_(SNIFF_SUBRATING, c221, excluded);
  check_command_(START_SYNCHRONIZATION_TRAIN, c203, excluded);
  check_command_(SWITCH_ROLE, c212, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 42 of 49)
  check_command_(TRUNCATED_PAGE_CANCEL, c129, excluded);
  check_command_(TRUNCATED_PAGE, c129, excluded);
  check_command_(USER_CONFIRMATION_REQUEST_NEGATIVE_REPLY, mandatory, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 43 of 49)
  check_command_(USER_CONFIRMATION_REQUEST_REPLY, mandatory, excluded);
  check_command_(USER_PASSKEY_REQUEST_NEGATIVE_REPLY, mandatory, excluded);
  check_command_(USER_PASSKEY_REQUEST_REPLY, mandatory, excluded);
  check_command_(WRITE_AFH_CHANNEL_ASSESSMENT_MODE, c140, c58);
  // Table 3.1: Alphabetical list of commands and events (Sheet 44 of 49)
  check_command_(WRITE_AUTHENTICATED_PAYLOAD_TIMEOUT, c151, c7);
  check_command_(WRITE_AUTHENTICATION_ENABLE, optional, excluded);
  check_command_(WRITE_AUTOMATIC_FLUSH_TIMEOUT, mandatory, excluded);
  check_command_(WRITE_CLASS_OF_DEVICE, mandatory, excluded);
  check_command_(WRITE_CONNECTION_ACCEPT_TIMEOUT, mandatory, c40);
  check_command_(WRITE_CURRENT_IAC_LAP, c125, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 45 of 49)
  check_command_(WRITE_DEFAULT_ERRONEOUS_DATA_REPORTING, c135, excluded);
  check_command_(WRITE_DEFAULT_LINK_POLICY_SETTINGS, c141, excluded);
  check_command_(WRITE_EXTENDED_INQUIRY_LENGTH, c128, excluded);
  check_command_(WRITE_EXTENDED_INQUIRY_RESPONSE, c205, excluded);
  check_command_(WRITE_EXTENDED_PAGE_TIMEOUT, optional, excluded);
  check_command_(WRITE_FLOW_CONTROL_MODE, c124, excluded);
  check_command_(WRITE_HOLD_MODE_ACTIVITY, c213, excluded);
  check_command_(WRITE_INQUIRY_MODE, c146, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 46 of 49)
  check_command_(WRITE_INQUIRY_SCAN_ACTIVITY, c125, excluded);
  check_command_(WRITE_INQUIRY_SCAN_TYPE, c125, excluded);
  check_command_(WRITE_INQUIRY_TRANSMIT_POWER_LEVEL, c127, excluded);
  check_command_(WRITE_LE_HOST_SUPPORT, c153, optional);
  check_command_(WRITE_LINK_POLICY_SETTINGS, c141, excluded);
  check_command_(WRITE_LINK_SUPERVISION_TIMEOUT, optional, excluded);
  check_command_(WRITE_LOCAL_NAME, mandatory, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 47 of 49)
  check_command_(WRITE_LOOPBACK_MODE, c123, excluded);
  check_command_(WRITE_NUM_BROADCAST_RETRANSMITS, optional, excluded);
  check_command_(WRITE_PAGE_SCAN_ACTIVITY, mandatory, excluded);
  check_command_(WRITE_PAGE_SCAN_TYPE, c154, excluded);
  check_command_(WRITE_PAGE_TIMEOUT, mandatory, excluded);
  check_command_(WRITE_PIN_TYPE, optional, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 48 of 49)
  check_command_(WRITE_SCAN_ENABLE, mandatory, excluded);
  check_command_(WRITE_SECURE_CONNECTIONS_HOST_SUPPORT, c218, excluded);
  check_command_(WRITE_SECURE_CONNECTIONS_TEST_MODE, c138, excluded);
  check_command_(WRITE_SIMPLE_PAIRING_DEBUG_MODE, mandatory, excluded);
  check_command_(WRITE_SIMPLE_PAIRING_MODE, mandatory, excluded);
  check_command_(WRITE_STORED_LINK_KEY, optional, excluded);
  check_command_(WRITE_SYNCHRONIZATION_TRAIN_PARAMETERS, c203, excluded);
  // Table 3.1: Alphabetical list of commands and events (Sheet 49 of 49)
  check_command_(WRITE_SYNCHRONOUS_FLOW_CONTROL_ENABLE, c135, excluded);
  check_command_(WRITE_VOICE_SETTING, c134, excluded);
  return true;
}

ControllerProperties::ControllerProperties()
    : supported_commands(SupportedCommands()),
      lmp_features({Page0LmpFeatures(), 0, Page2LmpFeatures()}),
      le_features(LlFeatures()) {
  if (!CheckSupportedFeatures()) {
    INFO("Warning: initial LMP and/or LE are not consistent. Please make sure"
         " that the features are correct w.r.t. the rules described"
         " in Vol 2, Part C 3.5 Feature requirements");
  }

  if (!CheckSupportedCommands()) {
    INFO("Warning: initial supported commands are not consistent. Please make"
         " sure that the supported commands are correct w.r.t. the rules"
         " described in Vol 4, Part E § 3 Overview of commands and events");
  }
}

// Commands enabled by the LE Extended Advertising feature bit.
static std::vector<OpCodeIndex> le_extended_advertising_commands_ = {
        OpCodeIndex::LE_CLEAR_ADVERTISING_SETS,
        OpCodeIndex::LE_EXTENDED_CREATE_CONNECTION_V1,
        OpCodeIndex::LE_READ_MAXIMUM_ADVERTISING_DATA_LENGTH,
        OpCodeIndex::LE_READ_NUMBER_OF_SUPPORTED_ADVERTISING_SETS,
        OpCodeIndex::LE_RECEIVER_TEST_V2,
        OpCodeIndex::LE_REMOVE_ADVERTISING_SET,
        OpCodeIndex::LE_SET_ADVERTISING_SET_RANDOM_ADDRESS,
        OpCodeIndex::LE_SET_DATA_RELATED_ADDRESS_CHANGES,
        OpCodeIndex::LE_SET_EXTENDED_ADVERTISING_DATA,
        OpCodeIndex::LE_SET_EXTENDED_ADVERTISING_ENABLE,
        OpCodeIndex::LE_SET_EXTENDED_ADVERTISING_PARAMETERS_V1,
        OpCodeIndex::LE_SET_EXTENDED_SCAN_ENABLE,
        OpCodeIndex::LE_SET_EXTENDED_SCAN_PARAMETERS,
        OpCodeIndex::LE_SET_EXTENDED_SCAN_RESPONSE_DATA,
};

// Commands enabled by the LE Periodic Advertising feature bit.
static std::vector<OpCodeIndex> le_periodic_advertising_commands_ = {
        OpCodeIndex::LE_ADD_DEVICE_TO_PERIODIC_ADVERTISER_LIST,
        OpCodeIndex::LE_CLEAR_PERIODIC_ADVERTISER_LIST,
        OpCodeIndex::LE_PERIODIC_ADVERTISING_CREATE_SYNC_CANCEL,
        OpCodeIndex::LE_PERIODIC_ADVERTISING_CREATE_SYNC,
        OpCodeIndex::LE_PERIODIC_ADVERTISING_TERMINATE_SYNC,
        OpCodeIndex::LE_READ_PERIODIC_ADVERTISER_LIST_SIZE,
        OpCodeIndex::LE_RECEIVER_TEST_V2,
        OpCodeIndex::LE_REMOVE_DEVICE_FROM_PERIODIC_ADVERTISER_LIST,
        OpCodeIndex::LE_SET_DATA_RELATED_ADDRESS_CHANGES,
        OpCodeIndex::LE_SET_PERIODIC_ADVERTISING_DATA,
        OpCodeIndex::LE_SET_PERIODIC_ADVERTISING_ENABLE,
        OpCodeIndex::LE_SET_PERIODIC_ADVERTISING_PARAMETERS_V1,
};

// Commands enabled by the LL Privacy feature bit.
static std::vector<OpCodeIndex> ll_privacy_commands_ = {
        OpCodeIndex::LE_ADD_DEVICE_TO_RESOLVING_LIST,
        OpCodeIndex::LE_CLEAR_RESOLVING_LIST,
        OpCodeIndex::LE_READ_LOCAL_RESOLVABLE_ADDRESS,
        OpCodeIndex::LE_READ_PEER_RESOLVABLE_ADDRESS,
        OpCodeIndex::LE_READ_RESOLVING_LIST_SIZE,
        OpCodeIndex::LE_RECEIVER_TEST_V2,
        OpCodeIndex::LE_REMOVE_DEVICE_FROM_RESOLVING_LIST,
        OpCodeIndex::LE_SET_ADDRESS_RESOLUTION_ENABLE,
        OpCodeIndex::LE_SET_PRIVACY_MODE,
        OpCodeIndex::LE_SET_RESOLVABLE_PRIVATE_ADDRESS_TIMEOUT,
};

// Commands enabled by the LL Connected Isochronous Stream feature bit.
// Central and Peripheral support bits are enabled together.
static std::vector<OpCodeIndex> ll_connected_isochronous_stream_commands_ = {
        OpCodeIndex::LE_SET_CIG_PARAMETERS,  OpCodeIndex::LE_SET_CIG_PARAMETERS_TEST,
        OpCodeIndex::LE_CREATE_CIS,          OpCodeIndex::LE_REMOVE_CIG,
        OpCodeIndex::LE_ACCEPT_CIS_REQUEST,  OpCodeIndex::LE_REJECT_CIS_REQUEST,
        OpCodeIndex::LE_SETUP_ISO_DATA_PATH, OpCodeIndex::LE_REMOVE_ISO_DATA_PATH,
        OpCodeIndex::LE_REQUEST_PEER_SCA,
};

static void SetLLFeatureBit(uint64_t& le_features, LLFeaturesBits bit, bool set) {
  if (set) {
    le_features |= static_cast<uint64_t>(bit);
  } else {
    le_features &= ~static_cast<uint64_t>(bit);
  }
}

static void SetSupportedCommandBits(std::array<uint8_t, 64>& supported_commands,
                                    std::vector<OpCodeIndex> const& commands, bool set) {
  for (auto command : commands) {
    int index = static_cast<int>(command);
    if (set) {
      supported_commands[index / 10] |= 1U << (index % 10);
    } else {
      supported_commands[index / 10] &= ~(1U << (index % 10));
    }
  }
}

ControllerProperties::ControllerProperties(rootcanal::configuration::Controller const& config)
    : strict(!config.has_strict() || config.strict()),
      supported_commands(SupportedCommands()),
      lmp_features({Page0LmpFeatures(), 0, Page2LmpFeatures()}),
      le_features(LlFeatures()) {
  using namespace rootcanal::configuration;

  // Set the base configuration.
  if (config.has_preset()) {
    switch (config.preset()) {
      case ControllerPreset::DEFAULT:
        break;

      case ControllerPreset::LAIRD_BL654:
        // Configuration extracted with the helper script controller_info.py
        br_supported = false;
        le_supported = true;
        hci_version = bluetooth::hci::HciVersion::V_5_4;
        hci_subversion = 0x5ad2;
        lmp_version = bluetooth::hci::LmpVersion::V_5_4;
        lmp_subversion = 0x5ad2;
        company_identifier = 0x7e8;
        supported_commands = std::array<uint8_t, 64>{
                0x20, 0x00, 0x80, 0x00, 0x00, 0xc0, 0x00, 0x0c, 0x00, 0x00, 0x04, 0x00, 0x00,
                0x00, 0x28, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0xf7,
                0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x30, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff,
                0x1f, 0xe0, 0xf7, 0xff, 0xff, 0xff, 0xc1, 0xe3, 0x03, 0x00, 0x00, 0x00, 0x00,
                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
        };
        lmp_features = std::array<uint64_t, 3>{0x6000000000, 0x0, 0x0};
        le_features = 0x19beff017fff;
        le_acl_data_packet_length = 512;
        total_num_le_acl_data_packets = 4;
        iso_data_packet_length = 512;
        total_num_iso_data_packets = 5;
        le_filter_accept_list_size = 4;
        le_resolving_list_size = 4;
        le_supported_states = 0x3ffffffffff;
        le_max_advertising_data_length = 256;
        le_num_supported_advertising_sets = 4;
        le_periodic_advertiser_list_size = 4;
        break;

      case ControllerPreset::CSR_RCK_PTS_DONGLE:
        // Configuration extracted with the helper script controller_info.py
        supports_csr_vendor_command = true;
        br_supported = true;
        le_supported = true;
        hci_version = bluetooth::hci::HciVersion::V_4_2;
        hci_subversion = 0x30e8;
        lmp_version = bluetooth::hci::LmpVersion::V_4_2;
        lmp_subversion = 0x30e8;
        company_identifier = 0xa;
        supported_commands = std::array<uint8_t, 64>{
                0xff, 0xff, 0xff, 0x03, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf3,
                0x0f, 0xe8, 0xfe, 0x3f, 0xf7, 0x83, 0xff, 0x1c, 0x00, 0x04, 0x00, 0x61, 0xf7,
                0xff, 0xff, 0x7f, 0x00, 0xc0, 0xff, 0xff, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00,
                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
        };
        lmp_features = std::array<uint64_t, 3>{0x875b1fd87e8fffff, 0x0, 0x30f};
        acl_data_packet_length = 310;
        total_num_acl_data_packets = 10;
        sco_data_packet_length = 64;
        total_num_sco_data_packets = 8;
        num_supported_iac = 2;
        le_features = 0x1f;
        le_acl_data_packet_length = 0;
        total_num_le_acl_data_packets = 0;
        le_filter_accept_list_size = 25;
        le_supported_states = 0x3ffffffffff;
        break;

      default:
        break;
    }
  }

  // Apply selected features.
  if (config.has_features()) {
    ControllerFeatures const& features = config.features();
    if (features.has_le_extended_advertising()) {
      SetLLFeatureBit(le_features, LLFeaturesBits::LE_EXTENDED_ADVERTISING,
                      features.le_extended_advertising());
      SetSupportedCommandBits(supported_commands, le_extended_advertising_commands_,
                              features.le_extended_advertising());
    }
    if (features.has_le_periodic_advertising()) {
      SetLLFeatureBit(le_features, LLFeaturesBits::LE_PERIODIC_ADVERTISING,
                      features.le_periodic_advertising());
      SetSupportedCommandBits(supported_commands, le_periodic_advertising_commands_,
                              features.le_periodic_advertising());
    }
    if (features.has_ll_privacy()) {
      SetLLFeatureBit(le_features, LLFeaturesBits::LL_PRIVACY, features.ll_privacy());
      SetSupportedCommandBits(supported_commands, ll_privacy_commands_, features.ll_privacy());
    }
    if (features.has_le_2m_phy()) {
      SetLLFeatureBit(le_features, LLFeaturesBits::LE_2M_PHY, features.le_2m_phy());
    }
    if (features.has_le_coded_phy()) {
      SetLLFeatureBit(le_features, LLFeaturesBits::LE_CODED_PHY, features.le_coded_phy());
    }
    if (features.has_le_connected_isochronous_stream()) {
      SetLLFeatureBit(le_features, LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_CENTRAL,
                      features.le_connected_isochronous_stream());
      SetLLFeatureBit(le_features, LLFeaturesBits::CONNECTED_ISOCHRONOUS_STREAM_PERIPHERAL,
                      features.le_connected_isochronous_stream());
      SetSupportedCommandBits(supported_commands, ll_connected_isochronous_stream_commands_,
                              features.le_connected_isochronous_stream());
    }
  }

  // Apply selected quirks.
  if (config.has_quirks()) {
    if (config.quirks().has_has_default_random_address()) {
      quirks.has_default_random_address = config.quirks().has_default_random_address();
    }
    if (config.quirks().has_hardware_error_before_reset()) {
      quirks.hardware_error_before_reset = config.quirks().hardware_error_before_reset();
    }
    // TODO(b/270606199): support send_acl_data_before_connection_complete
  }

  // Apply selected vendor features.
  if (config.has_vendor()) {
    if (config.vendor().has_csr()) {
      supports_csr_vendor_command = config.vendor().csr();
    }
    if (config.vendor().has_android()) {
      supports_le_get_vendor_capabilities_command = config.vendor().android();
      supports_le_apcf_vendor_command = config.vendor().android();
    }
  }

  if (!CheckSupportedFeatures()) {
    INFO("Warning: LMP and/or LE features are not consistent. Please make sure"
         " that the features are correct w.r.t. the rules described"
         " in Vol 2, Part C 3.5 Feature requirements");
  }

  if (!CheckSupportedCommands()) {
    INFO("Warning: supported commands are not consistent. Please make"
         " sure that the supported commands are correct w.r.t. the rules"
         " described in Vol 4, Part E § 3 Overview of commands and events");
  }
}

}  // namespace rootcanal