/******************************************************************************
*
* Copyright 2023 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#pragma once
#include
#include
#include
#include
#include "bta/include/bta_api_data_types.h"
#include "include/hardware/bluetooth.h"
#include "stack/include/bt_device_type.h"
#include "stack/include/bt_name.h"
#include "stack/include/bt_octets.h"
#include "stack/include/btm_ble_sec_api_types.h"
#include "stack/include/btm_sec_api_types.h"
#include "stack/include/hci_error_code.h"
#include "types/raw_address.h"
/* Security Setting Mask */
#define BTA_SEC_AUTHENTICATE \
(BTM_SEC_IN_AUTHENTICATE | BTM_SEC_OUT_AUTHENTICATE) /* Authentication required. */
#define BTA_SEC_ENCRYPT (BTM_SEC_IN_ENCRYPT | BTM_SEC_OUT_ENCRYPT) /* Encryption required. */
typedef uint16_t tBTA_SEC;
typedef enum : uint8_t {
/* Security Callback Events */
BTA_DM_PIN_REQ_EVT = 2, /* PIN request. */
BTA_DM_AUTH_CMPL_EVT = 3, /* Authentication complete indication. */
BTA_DM_AUTHORIZE_EVT = 4, /* Authorization request. */
BTA_DM_BOND_CANCEL_CMPL_EVT = 9, /* Bond cancel complete indication */
BTA_DM_SP_CFM_REQ_EVT = 10, /* Simple Pairing User Confirmation request */
BTA_DM_SP_KEY_NOTIF_EVT = 11, /* Simple Pairing Passkey Notification */
BTA_DM_BLE_KEY_EVT = 15, /* BLE SMP key event for peer device keys */
BTA_DM_BLE_SEC_REQ_EVT = 16, /* BLE SMP security request */
BTA_DM_BLE_PASSKEY_NOTIF_EVT = 17, /* SMP passkey notification event */
BTA_DM_BLE_PASSKEY_REQ_EVT = 18, /* SMP passkey request event */
BTA_DM_BLE_OOB_REQ_EVT = 19, /* SMP OOB request event */
BTA_DM_BLE_LOCAL_IR_EVT = 20, /* BLE local IR event */
BTA_DM_BLE_LOCAL_ER_EVT = 21, /* BLE local ER event */
BTA_DM_BLE_NC_REQ_EVT = 22, /* SMP Numeric Comparison request event */
BTA_DM_SP_RMT_OOB_EXT_EVT = 23, /* Simple Pairing Remote OOB Extended Data request. */
BTA_DM_BLE_AUTH_CMPL_EVT = 24, /* BLE Auth complete */
BTA_DM_DEV_UNPAIRED_EVT = 25,
BTA_DM_ENER_INFO_READ = 28, /* Energy info read */
BTA_DM_BLE_SC_OOB_REQ_EVT = 29, /* SMP SC OOB request event */
BTA_DM_BLE_CONSENT_REQ_EVT = 30, /* SMP consent request event */
BTA_DM_BLE_SC_CR_LOC_OOB_EVT = 31, /* SMP SC Create Local OOB request event */
BTA_DM_REPORT_BONDING_EVT = 32, /*handle for pin or key missing*/
BTA_DM_LE_ADDR_ASSOC_EVT = 33, /* identity address association event */
BTA_DM_SIRK_VERIFICATION_REQ_EVT = 35,
BTA_DM_KEY_MISSING_EVT = 36,
BTA_DM_ENCRYPTION_CHANGE_EVT = 37,
} tBTA_DM_SEC_EVT;
/* Structure associated with BTA_DM_PIN_REQ_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in
* order */
RawAddress bd_addr; /* BD address peer device. */
DEV_CLASS dev_class; /* Class of Device */
BD_NAME bd_name; /* Name of peer device. */
bool min_16_digit; /* true if the pin returned must be at least 16 digits */
} tBTA_DM_PIN_REQ;
/* BLE related definition */
#define BTA_DM_AUTH_FAIL_BASE (HCI_ERR_MAX_ERR + 10)
/* Converts SMP error codes defined in smp_api.h to SMP auth fail reasons below.
*/
#define BTA_DM_AUTH_CONVERT_SMP_CODE(x) (BTA_DM_AUTH_FAIL_BASE + (x))
#define BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_AUTH_FAIL)
#define BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_VALUE_ERR)
#define BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_NOT_SUPPORT)
#define BTA_DM_AUTH_SMP_UNKNOWN_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_FAIL_UNKNOWN)
#define BTA_DM_AUTH_SMP_CONN_TOUT (BTA_DM_AUTH_FAIL_BASE + SMP_CONN_TOUT)
typedef uint8_t tBTA_LE_KEY_TYPE; /* can be used as a bit mask */
typedef union {
tBTM_LE_PENC_KEYS penc_key; /* received peer encryption key */
tBTM_LE_PCSRK_KEYS psrk_key; /* received peer device SRK */
tBTM_LE_PID_KEYS pid_key; /* peer device ID key */
tBTM_LE_LENC_KEYS lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/
tBTM_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/
tBTM_LE_PID_KEYS lid_key; /* local device ID key for the particular remote */
} tBTA_LE_KEY_VALUE;
#define BTA_BLE_LOCAL_KEY_TYPE_ID 1
#define BTA_BLE_LOCAL_KEY_TYPE_ER 2
typedef uint8_t tBTA_DM_BLE_LOCAL_KEY_MASK;
typedef struct {
Octet16 ir;
Octet16 irk;
Octet16 dhk;
} tBTA_BLE_LOCAL_ID_KEYS;
enum class tBTA_DM_BLE_SEC_GRANT {
BTA_DM_SEC_GRANTED = BTA_SUCCESS,
BTA_DM_SEC_PAIR_NOT_SPT = BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT
};
/* Structure associated with BTA_DM_BLE_SEC_REQ_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in
* order */
RawAddress bd_addr; /* peer address */
DEV_CLASS dev_class;
BD_NAME bd_name; /* peer device name */
} tBTA_DM_BLE_SEC_REQ;
typedef struct {
RawAddress bd_addr; /* peer address */
tBTM_LE_KEY_TYPE key_type;
tBTM_LE_KEY_VALUE* p_key_value;
} tBTA_DM_BLE_KEY;
/* Structure associated with BTA_DM_AUTH_CMPL_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
bool key_present; /* Valid link key value in key element */
LinkKey key; /* Link key associated with peer device. */
uint8_t key_type; /* The type of Link Key */
bool success; /* true of authentication succeeded, false if failed. */
tHCI_REASON fail_reason; /* The HCI reason/error code for when success=false */
tBLE_ADDR_TYPE addr_type; /* Peer device address type */
tBT_DEVICE_TYPE dev_type;
bool is_ctkd; /* True if key is derived using CTKD procedure */
} tBTA_DM_AUTH_CMPL;
/* Structure associated with BTA_DM_DEV_UNPAIRED_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
tBT_TRANSPORT transport_link_type;
} tBTA_DM_UNPAIR;
#define BTA_AUTH_SP_YES \
BTM_AUTH_SP_YES /* 1 MITM Protection Required - Single Profile/non-bonding \
Use IO Capabilities to determine authentication procedure \
*/
#define BTA_AUTH_DD_BOND BTM_AUTH_DD_BOND /* 2 this bit is set for dedicated bonding */
#define BTA_AUTH_GEN_BOND BTM_AUTH_SPGB_NO /* 4 this bit is set for general bonding */
#define BTA_AUTH_BONDS BTM_AUTH_BONDS /* 6 the general/dedicated bonding bits */
#define BTA_LE_AUTH_REQ_SC_MITM_BOND BTM_LE_AUTH_REQ_SC_MITM_BOND /* 1101 */
/* Structure associated with BTA_DM_SP_CFM_REQ_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in
* order */
RawAddress bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
uint32_t num_val; /* the numeric value for comparison. If just_works, do not
show this number to UI */
bool just_works; /* true, if "Just Works" association model */
tBTM_AUTH_REQ loc_auth_req; /* Authentication required for local device */
tBTM_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */
tBTM_IO_CAP loc_io_caps; /* IO Capabilities of local device */
tBTM_IO_CAP rmt_io_caps; // IO Capabilities of remote device
} tBTA_DM_SP_CFM_REQ;
/* Structure associated with BTA_DM_SP_KEY_NOTIF_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in
* order */
RawAddress bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
uint32_t passkey; /* the numeric value for comparison. If just_works, do not
show this number to UI */
} tBTA_DM_SP_KEY_NOTIF;
/* Structure associated with BTA_DM_SP_RMT_OOB_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in
* order */
RawAddress bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
} tBTA_DM_SP_RMT_OOB;
/* Structure associated with BTA_DM_BOND_CANCEL_CMPL_EVT */
typedef struct {
tBTA_STATUS result; /* true of bond cancel succeeded, false if failed. */
} tBTA_DM_BOND_CANCEL_CMPL;
/* Add to remove bond of key missing RC */
typedef struct {
RawAddress bd_addr;
} tBTA_DM_RC_UNPAIR;
typedef struct {
Octet16 local_oob_c; /* Local OOB Data Confirmation/Commitment */
Octet16 local_oob_r; /* Local OOB Data Randomizer */
} tBTA_DM_LOC_OOB_DATA;
/* Union of all security callback structures */
typedef union {
tBTA_DM_PIN_REQ pin_req; /* PIN request. */
tBTA_DM_AUTH_CMPL auth_cmpl; /* Authentication complete indication. */
tBTA_DM_UNPAIR dev_unpair; /* Remove bonding complete indication */
tBTA_DM_SP_CFM_REQ cfm_req; /* user confirm request */
tBTA_DM_SP_KEY_NOTIF key_notif; /* passkey notification */
tBTA_DM_SP_RMT_OOB rmt_oob; /* remote oob */
tBTA_DM_BOND_CANCEL_CMPL bond_cancel_cmpl; /* Bond Cancel Complete indication */
tBTA_DM_BLE_SEC_REQ ble_req; /* BLE SMP related request */
tBTA_DM_BLE_KEY ble_key; /* BLE SMP keys used when pairing */
tBTA_BLE_LOCAL_ID_KEYS ble_id_keys; /* IR event */
Octet16 ble_er; /* ER event data */
tBTA_DM_LOC_OOB_DATA local_oob_data; /* Local OOB data generated by us */
tBTA_DM_RC_UNPAIR delete_key_RC_to_unpair;
tBTA_DM_PROC_ID_ADDR proc_id_addr; /* Identity address event */
tBTA_DM_KEY_MISSING key_missing;
bt_encryption_change_evt encryption_change;
} tBTA_DM_SEC;
/* Security callback */
typedef void(tBTA_DM_SEC_CBACK)(tBTA_DM_SEC_EVT event, tBTA_DM_SEC* p_data);
/* Encryption callback*/
typedef void(tBTA_DM_ENCRYPT_CBACK)(const RawAddress& bd_addr, tBT_TRANSPORT transport,
tBTA_STATUS result);
/*******************************************************************************
*
* Function BTA_DmBond
*
* Description This function initiates a bonding procedure with a peer
* device by designated transport. The bonding procedure
* enables authentication and optionally encryption on the
* Bluetooth link.
*
*
* Returns void
*
******************************************************************************/
void BTA_DmBond(const RawAddress& bd_addr, tBLE_ADDR_TYPE addr_type, tBT_TRANSPORT transport,
tBT_DEVICE_TYPE device_type);
/*******************************************************************************
*
* Function BTA_DmBondCancel
*
* Description This function cancels a bonding procedure with a peer
* device.
*
*
* Returns void
*
******************************************************************************/
void BTA_DmBondCancel(const RawAddress& bd_addr);
/*******************************************************************************
*
* Function BTA_DmPinReply
*
* Description This function provides a PIN when one is requested by DM
* during a bonding procedure. The application should call
* this function after the security callback is called with
* a BTA_DM_PIN_REQ_EVT.
*
*
* Returns void
*
******************************************************************************/
void BTA_DmPinReply(const RawAddress& bd_addr, bool accept, uint8_t pin_len, uint8_t* p_pin);
/*******************************************************************************
*
* Function BTA_DmLocalOob
*
* Description This function retrieves the OOB data from local controller.
* The result is reported by bta_dm_co_loc_oob().
*
* Returns void
*
******************************************************************************/
void BTA_DmLocalOob(void);
/*******************************************************************************
*
* Function BTA_DmConfirm
*
* Description This function accepts or rejects the numerical value of the
* Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT
*
* Returns void
*
******************************************************************************/
void BTA_DmConfirm(const RawAddress& bd_addr, bool accept);
/*******************************************************************************
*
* Function BTA_DmAddDevice
*
* Description This function adds a device to the security database list
* of peer devices. This function would typically be called
* at system startup to initialize the security database with
* known peer devices. This is a direct execution function
* that may lock task scheduling on some platforms.
*
* Returns void
*
******************************************************************************/
void BTA_DmAddDevice(RawAddress bd_addr, DEV_CLASS dev_class, LinkKey link_key, uint8_t key_type,
uint8_t pin_length);
/*******************************************************************************
*
* Function BTA_DmRemoveDevice
*
* Description This function removes a device from the security database.
* This is a direct execution function that may lock task
* scheduling on some platforms.
*
*
* Returns BTA_SUCCESS if successful.
* BTA_FAIL if operation failed.
*
******************************************************************************/
tBTA_STATUS BTA_DmRemoveDevice(const RawAddress& bd_addr);
/* BLE related API functions */
/*******************************************************************************
*
* Function BTA_DmBleSecurityGrant
*
* Description Grant security request access.
*
* Parameters: bd_addr - BD address of the peer
* res - security grant status.
*
* Returns void
*
******************************************************************************/
void BTA_DmBleSecurityGrant(const RawAddress& bd_addr, tBTA_DM_BLE_SEC_GRANT res);
/*******************************************************************************
*
* Function BTA_DmBlePasskeyReply
*
* Description Send BLE SMP passkey reply.
*
* Parameters: bd_addr - BD address of the peer
* accept - passkey entry successful or declined.
* passkey - passkey value, must be a 6 digit number,
* can be lead by 0.
*
* Returns void
*
******************************************************************************/
void BTA_DmBlePasskeyReply(const RawAddress& bd_addr, bool accept, uint32_t passkey);
/*******************************************************************************
*
* Function BTA_DmBleConfirmReply
*
* Description Send BLE SMP SC user confirmation reply.
*
* Parameters: bd_addr - BD address of the peer
* accept - numbers to compare are the same or
* different.
*
* Returns void
*
******************************************************************************/
void BTA_DmBleConfirmReply(const RawAddress& bd_addr, bool accept);
/*******************************************************************************
*
* Function BTA_DmAddBleDevice
*
* Description Add a BLE device. This function will be normally called
* during host startup to restore all required information
* for a LE device stored in the NVRAM.
*
* Parameters: bd_addr - BD address of the peer
* dev_type - Remote device's device type.
* addr_type - LE device address type.
*
* Returns void
*
******************************************************************************/
void BTA_DmAddBleDevice(const RawAddress& bd_addr, tBLE_ADDR_TYPE addr_type,
tBT_DEVICE_TYPE dev_type);
/*******************************************************************************
*
* Function BTA_DmAddBleKey
*
* Description Add/modify LE device information. This function will be
* normally called during host startup to restore all required
* information stored in the NVRAM.
*
* Parameters: bd_addr - BD address of the peer
* p_le_key - LE key values.
* key_type - LE SMP key type.
*
* Returns void
*
******************************************************************************/
void BTA_DmAddBleKey(const RawAddress& bd_addr, tBTA_LE_KEY_VALUE* p_le_key,
tBTM_LE_KEY_TYPE key_type);
/*******************************************************************************
*
* Function BTA_DmSetEncryption
*
* Description This function is called to ensure that connection is
* encrypted. Should be called only on an open connection.
* Typically only needed for connections that first want to
* bring up unencrypted links, then later encrypt them.
*
* Parameters: bd_addr - Address of the peer device
* transport - transport of the link to be encruypted
* p_callback - Pointer to callback function to indicat the
* link encryption status
* sec_act - This is the security action to indicate
* what kind of BLE security level is required
* for the BLE link if BLE is supported
* Note: This parameter is ignored for
* BR/EDR or if BLE is not supported.
*
* Returns void
*
*
******************************************************************************/
void BTA_DmSetEncryption(const RawAddress& bd_addr, tBT_TRANSPORT transport,
tBTA_DM_ENCRYPT_CBACK* p_callback, tBTM_BLE_SEC_ACT sec_act);
/*******************************************************************************
*
* Function BTA_DmSirkSecCbRegister
*
* Description This procedure registeres in requested a callback for
* verification by CSIS potential set member.
*
* Parameters p_cback - callback to member verificator
*
* Returns void
*
******************************************************************************/
void BTA_DmSirkSecCbRegister(tBTA_DM_SEC_CBACK* p_cback);
/*******************************************************************************
*
* Function BTA_DmSirkConfirmDeviceReply
*
* Description This procedure confirms requested to validate set device.
*
* Parameters bd_addr - BD address of the peer
* accept - True if device is authorized by CSIS, false
* otherwise.
*
* Returns void
*
******************************************************************************/
void BTA_DmSirkConfirmDeviceReply(const RawAddress& bd_addr, bool accept);
namespace std {
template <>
struct formatter : enum_formatter {};
} // namespace std