/*
 * Copyright 2019-2024 NXP
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#pragma once

#include <phNxpNciHal_ext.h>

#include <vector>

#include "phNfcStatus.h"

#define AUTONOMOUS_SCREEN_OFF_LOCK_MASK 0x20
#define SWITCH_OFF_MASK 0x02
#define NCI_GET_CONFI_MIN_LEN 0x04
#define NXP_MAX_RETRY_COUNT 0x03
typedef enum {
  CONFIG,
  API,
} tNFC_requestedBy;
typedef struct {
  uint8_t autonomous_mode;
  uint8_t guard_timer_value;
} nxp_nfc_config_ext_t;
extern nxp_nfc_config_ext_t config_ext;

/*
 * Add needed GPIO status to read into two bits each
 * INVALID(-2)
 * GPIO_SET(1)
 * GPIO_RESET(0)
 */
typedef struct {
  int irq : 2;
  int ven : 2;
  int fw_dwl : 2;
} platform_gpios_t;

/*
 * platform_gpios_status --> decoded gpio status flag bits
 * gpios_status_data    -->  encoded gpio status flag bytes
 */
union {
  uint32_t gpios_status_data;
  platform_gpios_t platform_gpios_status;
} gpios_data;

/*******************************************************************************
**
** Function         phNxpNciHal_getExtVendorConfig()
**
** Description      this function gets and updates the extension params
**
*******************************************************************************/
void phNxpNciHal_getExtVendorConfig();

/******************************************************************************
 * Function         phNxpNciHal_updateAutonomousPwrState
 *
 * Description      This function can be used to update autonomous pwr state.
 *                  num: value to check  switch off bit is set or not.
 *
 * Returns          uint8_t
 *
 ******************************************************************************/
uint8_t phNxpNciHal_updateAutonomousPwrState(uint8_t num);
/******************************************************************************
 * Function         phNxpNciHal_setAutonomousMode
 *
 * Description      This function can be used to set NFCC in autonomous mode
 *
 * Returns          NFCSTATUS_FAILED or NFCSTATUS_SUCCESS
 *
 ******************************************************************************/
NFCSTATUS phNxpNciHal_setAutonomousMode();

/******************************************************************************
 * Function         phNxpNciHal_setGuardTimer
 *
 * Description      This function can be used to set Guard timer
 *
 * Returns          NFCSTATUS_FAILED or NFCSTATUS_SUCCESS
 *
 ******************************************************************************/
NFCSTATUS phNxpNciHal_setGuardTimer();

/*****************************************************************************
 * Function         phNxpNciHal_send_get_cfg
 *
 * Description      This function is called to get the configurations from
 * EEPROM
 *
 * Params           cmd_get_cfg, Buffer to GET command
 *                  cmd_len,     Length of the command
 * Returns          SUCCESS/FAILURE
 *
 *
 *****************************************************************************/
NFCSTATUS phNxpNciHal_send_get_cfg(const uint8_t* cmd_get_cfg, long cmd_len);

/*****************************************************************************
 * Function         phNxpNciHal_configure_merge_sak
 *
 * Description      This function is called to apply iso_dep sak merge settings
 *                  as per the config option NAME_NXP_ISO_DEP_MERGE_SAK
 *
 * Params           None

 * Returns          NFCSTATUS_FAILED or NFCSTATUS_SUCCESS
 *
 *****************************************************************************/
NFCSTATUS phNxpNciHal_configure_merge_sak();
/******************************************************************************
 * Function         phNxpNciHal_setSrdtimeout
 *
 * Description      This function can be used to set srd SRD Timeout.
 *
 * Returns          NFCSTATUS_FAILED or NFCSTATUS_SUCCESS or
 *                  NFCSTATUS_FEATURE_NOT_SUPPORTED
 *
 ******************************************************************************/
NFCSTATUS phNxpNciHal_setSrdtimeout();
/******************************************************************************
 * Function         phNxpNciHal_set_uicc_hci_params
 *
 * Description      This will update value of uicc session status to store flag
 *                  to eeprom
 *
 * Parameters       value - this value will be updated to eeprom flag.
 *
 * Returns          status of the write
 *
 ******************************************************************************/
NFCSTATUS
phNxpNciHal_set_uicc_hci_params(vector<uint8_t>& ptr, uint8_t bufflen,
                                phNxpNci_EEPROM_request_type_t uiccType);
/******************************************************************************
 * Function         phNxpNciHal_get_uicc_hci_params
 *
 * Description      This will read the value of fw download status flag
 *                  from eeprom
 *
 * Parameters       value - this parameter will be updated with the flag
 *                  value from eeprom.
 *
 * Returns          status of the read
 *
 ******************************************************************************/
NFCSTATUS
phNxpNciHal_get_uicc_hci_params(vector<uint8_t>& ptr, uint8_t bufflen,
                                phNxpNci_EEPROM_request_type_t uiccType);

/******************************************************************************
 * Function         phNxpNciHal_setExtendedFieldMode
 *
 * Description      This function can be used to set nfcc extended field mode
 *
 * Returns          NFCSTATUS_FAILED or NFCSTATUS_SUCCESS or
 *                  NFCSTATUS_FEATURE_NOT_SUPPORTED
 *
 ******************************************************************************/
NFCSTATUS phNxpNciHal_setExtendedFieldMode();

/*******************************************************************************
**
** Function         phNxpNciHal_configGPIOControl()
**
** Description      Helper function to configure GPIO control
**
** Parameters       gpioControl - Byte array with first two bytes are used to
**                  configure gpio for specific functionality (ex:ULPDET,
**                  GPIO LEVEL ...) and 3rd byte indicates the level of GPIO
**                  to be set.
**                  len        - Len of byte array
**
** Returns          NFCSTATUS_FAILED or NFCSTATUS_SUCCESS
*******************************************************************************/
NFCSTATUS phNxpNciHal_configGPIOControl(uint8_t gpioControl[], uint8_t len);

/*******************************************************************************
**
** Function         phNxpNciHal_decodeGpioStatus()
**
** Description      this function decodes gpios status of the nfc pins
**
*******************************************************************************/
void phNxpNciHal_decodeGpioStatus(void);

/******************************************************************************
 **
 ** Function         phNxpNciHal_setDCDCConfig()
 **
 ** Description      Sets DCDC On/Off
 **
 *****************************************************************************/
void phNxpNciHal_setDCDCConfig(void);

/*******************************************************************************
**
** Function         phNxpNciHal_isVendorSpecificCommand()
**
** Description      this function checks vendor specific command or not
**
** Returns          true if the command is vendor specific otherwise false
*******************************************************************************/
bool phNxpNciHal_isVendorSpecificCommand(uint16_t data_len,
                                         const uint8_t* p_data);

/*******************************************************************************
**
** Function         phNxpNciHal_handleVendorSpecificCommand()
**
** Description      This handles the vendor specific command
**
** Returns          It returns number of bytes received.
*******************************************************************************/
int phNxpNciHal_handleVendorSpecificCommand(uint16_t data_len,
                                            const uint8_t* p_data);

/*******************************************************************************
**
** Function         phNxpNciHal_vendorSpecificCallback()
**
** Params           oid, opcode, data
** Description      This function sends response to Vendor Specific commands
**
*******************************************************************************/
void phNxpNciHal_vendorSpecificCallback(int oid, int opcode,
                                        vector<uint8_t> data);

/*******************************************************************************
**
** Function         phNxpNciHal_isObserveModeSupported()
**
** Description      check's the observe mode supported or not based on the
**                  config value
**
** Returns          bool: true if supported, otherwise false
*******************************************************************************/
bool phNxpNciHal_isObserveModeSupported();

/*******************************************************************************
 *
 * Function         handleGetCapability()
 *
 * Description      Get Capability command is not supported, hence returning
 *                  failure
 *
 * Returns          It returns number of bytes received.
 *
 ******************************************************************************/
int handleGetCapability(uint16_t data_len, const uint8_t* p_data);