/*
 * Copyright (C) 2018 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "Sensor.h"

#include <utils/SystemClock.h>

#include <cmath>

namespace android {
namespace hardware {
namespace sensors {
namespace V2_X {
namespace implementation {

using ::android::hardware::sensors::V1_0::EventPayload;
using ::android::hardware::sensors::V1_0::MetaDataEventType;
using ::android::hardware::sensors::V1_0::OperationMode;
using ::android::hardware::sensors::V1_0::Result;
using ::android::hardware::sensors::V1_0::SensorFlagBits;
using ::android::hardware::sensors::V1_0::SensorStatus;
using ::android::hardware::sensors::V2_1::Event;
using ::android::hardware::sensors::V2_1::SensorInfo;
using ::android::hardware::sensors::V2_1::SensorType;

Sensor::Sensor(ISensorsEventCallback* callback)
    : mIsEnabled(false),
      mSamplingPeriodNs(0),
      mLastSampleTimeNs(0),
      mStopThread(false),
      mCallback(callback),
      mMode(OperationMode::NORMAL) {
    mRunThread = std::thread(startThread, this);
}

Sensor::~Sensor() {
    std::unique_lock<std::mutex> lock(mRunMutex);
    mStopThread = true;
    mIsEnabled = false;
    mWaitCV.notify_all();
    lock.release();
    mRunThread.join();
}

const SensorInfo& Sensor::getSensorInfo() const {
    return mSensorInfo;
}

void Sensor::batch(int64_t samplingPeriodNs) {
    if (samplingPeriodNs < mSensorInfo.minDelay * 1000LL) {
        samplingPeriodNs = mSensorInfo.minDelay * 1000LL;
    } else if (samplingPeriodNs > mSensorInfo.maxDelay * 1000LL) {
        samplingPeriodNs = mSensorInfo.maxDelay * 1000LL;
    }

    if (mSamplingPeriodNs != samplingPeriodNs) {
        mSamplingPeriodNs = samplingPeriodNs;
        // Wake up the 'run' thread to check if a new event should be generated now
        mWaitCV.notify_all();
    }
}

void Sensor::activate(bool enable) {
    if (mIsEnabled != enable) {
        std::unique_lock<std::mutex> lock(mRunMutex);
        mIsEnabled = enable;
        mWaitCV.notify_all();
    }
}

Result Sensor::flush() {
    // Only generate a flush complete event if the sensor is enabled and if the sensor is not a
    // one-shot sensor.
    if (!mIsEnabled || (mSensorInfo.flags & static_cast<uint32_t>(SensorFlagBits::ONE_SHOT_MODE))) {
        return Result::BAD_VALUE;
    }

    // Note: If a sensor supports batching, write all of the currently batched events for the sensor
    // to the Event FMQ prior to writing the flush complete event.
    Event ev;
    ev.sensorHandle = mSensorInfo.sensorHandle;
    ev.sensorType = SensorType::META_DATA;
    ev.u.meta.what = MetaDataEventType::META_DATA_FLUSH_COMPLETE;
    std::vector<Event> evs{ev};
    mCallback->postEvents(evs, isWakeUpSensor());

    return Result::OK;
}

void Sensor::startThread(Sensor* sensor) {
    sensor->run();
}

void Sensor::run() {
    std::unique_lock<std::mutex> runLock(mRunMutex);
    constexpr int64_t kNanosecondsInSeconds = 1000 * 1000 * 1000;

    while (!mStopThread) {
        if (!mIsEnabled || mMode == OperationMode::DATA_INJECTION) {
            mWaitCV.wait(runLock, [&] {
                return ((mIsEnabled && mMode == OperationMode::NORMAL) || mStopThread);
            });
        } else {
            timespec curTime;
            clock_gettime(CLOCK_BOOTTIME, &curTime);
            int64_t now = (curTime.tv_sec * kNanosecondsInSeconds) + curTime.tv_nsec;
            int64_t nextSampleTime = mLastSampleTimeNs + mSamplingPeriodNs;

            if (now >= nextSampleTime) {
                mLastSampleTimeNs = now;
                nextSampleTime = mLastSampleTimeNs + mSamplingPeriodNs;
                mCallback->postEvents(readEvents(), isWakeUpSensor());
            }

            mWaitCV.wait_for(runLock, std::chrono::nanoseconds(nextSampleTime - now));
        }
    }
}

bool Sensor::isWakeUpSensor() {
    return mSensorInfo.flags & static_cast<uint32_t>(SensorFlagBits::WAKE_UP);
}

std::vector<Event> Sensor::readEvents() {
    std::vector<Event> events;
    Event event;
    event.sensorHandle = mSensorInfo.sensorHandle;
    event.sensorType = mSensorInfo.type;
    event.timestamp = ::android::elapsedRealtimeNano();
    memset(&event.u, 0, sizeof(event.u));
    readEventPayload(event.u);
    events.push_back(event);
    return events;
}

void Sensor::setOperationMode(OperationMode mode) {
    if (mMode != mode) {
        std::unique_lock<std::mutex> lock(mRunMutex);
        mMode = mode;
        mWaitCV.notify_all();
    }
}

bool Sensor::supportsDataInjection() const {
    return mSensorInfo.flags & static_cast<uint32_t>(SensorFlagBits::DATA_INJECTION);
}

Result Sensor::injectEvent(const Event& event) {
    Result result = Result::OK;
    if (event.sensorType == SensorType::ADDITIONAL_INFO) {
        // When in OperationMode::NORMAL, SensorType::ADDITIONAL_INFO is used to push operation
        // environment data into the device.
    } else if (!supportsDataInjection()) {
        result = Result::INVALID_OPERATION;
    } else if (mMode == OperationMode::DATA_INJECTION) {
        mCallback->postEvents(std::vector<Event>{event}, isWakeUpSensor());
    } else {
        result = Result::BAD_VALUE;
    }
    return result;
}

OnChangeSensor::OnChangeSensor(ISensorsEventCallback* callback)
    : Sensor(callback), mPreviousEventSet(false) {}

void OnChangeSensor::activate(bool enable) {
    Sensor::activate(enable);
    if (!enable) {
        mPreviousEventSet = false;
    }
}

std::vector<Event> OnChangeSensor::readEvents() {
    std::vector<Event> events = Sensor::readEvents();
    std::vector<Event> outputEvents;

    for (auto iter = events.begin(); iter != events.end(); ++iter) {
        Event ev = *iter;
        if (!mPreviousEventSet || memcmp(&mPreviousEvent.u, &ev.u, sizeof(ev.u)) != 0) {
            outputEvents.push_back(ev);
            mPreviousEvent = ev;
            mPreviousEventSet = true;
        }
    }
    return outputEvents;
}

AccelSensor::AccelSensor(int32_t sensorHandle, ISensorsEventCallback* callback) : Sensor(callback) {
    mSensorInfo.sensorHandle = sensorHandle;
    mSensorInfo.name = "Accel Sensor";
    mSensorInfo.vendor = "Vendor String";
    mSensorInfo.version = 1;
    mSensorInfo.type = SensorType::ACCELEROMETER;
    mSensorInfo.typeAsString = "";
    mSensorInfo.maxRange = 78.4f;  // +/- 8g
    mSensorInfo.resolution = 1.52e-5;
    mSensorInfo.power = 0.001f;        // mA
    mSensorInfo.minDelay = 10 * 1000;  // microseconds
    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
    mSensorInfo.fifoReservedEventCount = 0;
    mSensorInfo.fifoMaxEventCount = 0;
    mSensorInfo.requiredPermission = "";
    mSensorInfo.flags = static_cast<uint32_t>(SensorFlagBits::DATA_INJECTION);
};

void AccelSensor::readEventPayload(EventPayload& payload) {
    payload.vec3.x = 0;
    payload.vec3.y = 0;
    payload.vec3.z = 9.8;
    payload.vec3.status = SensorStatus::ACCURACY_HIGH;
}

PressureSensor::PressureSensor(int32_t sensorHandle, ISensorsEventCallback* callback)
    : Sensor(callback) {
    mSensorInfo.sensorHandle = sensorHandle;
    mSensorInfo.name = "Pressure Sensor";
    mSensorInfo.vendor = "Vendor String";
    mSensorInfo.version = 1;
    mSensorInfo.type = SensorType::PRESSURE;
    mSensorInfo.typeAsString = "";
    mSensorInfo.maxRange = 1100.0f;     // hPa
    mSensorInfo.resolution = 0.005f;    // hPa
    mSensorInfo.power = 0.001f;         // mA
    mSensorInfo.minDelay = 100 * 1000;  // microseconds
    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
    mSensorInfo.fifoReservedEventCount = 0;
    mSensorInfo.fifoMaxEventCount = 0;
    mSensorInfo.requiredPermission = "";
    mSensorInfo.flags = 0;
};

void PressureSensor::readEventPayload(EventPayload& payload) {
    payload.scalar = 1013.25f;
}

MagnetometerSensor::MagnetometerSensor(int32_t sensorHandle, ISensorsEventCallback* callback)
    : Sensor(callback) {
    mSensorInfo.sensorHandle = sensorHandle;
    mSensorInfo.name = "Magnetic Field Sensor";
    mSensorInfo.vendor = "Vendor String";
    mSensorInfo.version = 1;
    mSensorInfo.type = SensorType::MAGNETIC_FIELD;
    mSensorInfo.typeAsString = "";
    mSensorInfo.maxRange = 1300.0f;
    mSensorInfo.resolution = 0.01f;
    mSensorInfo.power = 0.001f;        // mA
    mSensorInfo.minDelay = 20 * 1000;  // microseconds
    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
    mSensorInfo.fifoReservedEventCount = 0;
    mSensorInfo.fifoMaxEventCount = 0;
    mSensorInfo.requiredPermission = "";
    mSensorInfo.flags = 0;
};

LightSensor::LightSensor(int32_t sensorHandle, ISensorsEventCallback* callback)
    : OnChangeSensor(callback) {
    mSensorInfo.sensorHandle = sensorHandle;
    mSensorInfo.name = "Light Sensor";
    mSensorInfo.vendor = "Vendor String";
    mSensorInfo.version = 1;
    mSensorInfo.type = SensorType::LIGHT;
    mSensorInfo.typeAsString = "";
    mSensorInfo.maxRange = 43000.0f;
    mSensorInfo.resolution = 10.0f;
    mSensorInfo.power = 0.001f;         // mA
    mSensorInfo.minDelay = 200 * 1000;  // microseconds
    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
    mSensorInfo.fifoReservedEventCount = 0;
    mSensorInfo.fifoMaxEventCount = 0;
    mSensorInfo.requiredPermission = "";
    mSensorInfo.flags = static_cast<uint32_t>(SensorFlagBits::ON_CHANGE_MODE);
};

ProximitySensor::ProximitySensor(int32_t sensorHandle, ISensorsEventCallback* callback)
    : OnChangeSensor(callback) {
    mSensorInfo.sensorHandle = sensorHandle;
    mSensorInfo.name = "Proximity Sensor";
    mSensorInfo.vendor = "Vendor String";
    mSensorInfo.version = 1;
    mSensorInfo.type = SensorType::PROXIMITY;
    mSensorInfo.typeAsString = "";
    mSensorInfo.maxRange = 5.0f;
    mSensorInfo.resolution = 1.0f;
    mSensorInfo.power = 0.012f;         // mA
    mSensorInfo.minDelay = 200 * 1000;  // microseconds
    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
    mSensorInfo.fifoReservedEventCount = 0;
    mSensorInfo.fifoMaxEventCount = 0;
    mSensorInfo.requiredPermission = "";
    mSensorInfo.flags =
            static_cast<uint32_t>(SensorFlagBits::ON_CHANGE_MODE | SensorFlagBits::WAKE_UP);
};

GyroSensor::GyroSensor(int32_t sensorHandle, ISensorsEventCallback* callback) : Sensor(callback) {
    mSensorInfo.sensorHandle = sensorHandle;
    mSensorInfo.name = "Gyro Sensor";
    mSensorInfo.vendor = "Vendor String";
    mSensorInfo.version = 1;
    mSensorInfo.type = SensorType::GYROSCOPE;
    mSensorInfo.typeAsString = "";
    mSensorInfo.maxRange = 1000.0f * M_PI / 180.0f;
    mSensorInfo.resolution = 1000.0f * M_PI / (180.0f * 32768.0f);
    mSensorInfo.power = 0.001f;
    mSensorInfo.minDelay = 10 * 1000;  // microseconds
    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
    mSensorInfo.fifoReservedEventCount = 0;
    mSensorInfo.fifoMaxEventCount = 0;
    mSensorInfo.requiredPermission = "";
    mSensorInfo.flags = 0;
};

AmbientTempSensor::AmbientTempSensor(int32_t sensorHandle, ISensorsEventCallback* callback)
    : OnChangeSensor(callback) {
    mSensorInfo.sensorHandle = sensorHandle;
    mSensorInfo.name = "Ambient Temp Sensor";
    mSensorInfo.vendor = "Vendor String";
    mSensorInfo.version = 1;
    mSensorInfo.type = SensorType::AMBIENT_TEMPERATURE;
    mSensorInfo.typeAsString = "";
    mSensorInfo.maxRange = 80.0f;
    mSensorInfo.resolution = 0.01f;
    mSensorInfo.power = 0.001f;
    mSensorInfo.minDelay = 40 * 1000;  // microseconds
    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
    mSensorInfo.fifoReservedEventCount = 0;
    mSensorInfo.fifoMaxEventCount = 0;
    mSensorInfo.requiredPermission = "";
    mSensorInfo.flags = static_cast<uint32_t>(SensorFlagBits::ON_CHANGE_MODE);
};

RelativeHumiditySensor::RelativeHumiditySensor(int32_t sensorHandle,
                                               ISensorsEventCallback* callback)
    : OnChangeSensor(callback) {
    mSensorInfo.sensorHandle = sensorHandle;
    mSensorInfo.name = "Relative Humidity Sensor";
    mSensorInfo.vendor = "Vendor String";
    mSensorInfo.version = 1;
    mSensorInfo.type = SensorType::RELATIVE_HUMIDITY;
    mSensorInfo.typeAsString = "";
    mSensorInfo.maxRange = 100.0f;
    mSensorInfo.resolution = 0.1f;
    mSensorInfo.power = 0.001f;
    mSensorInfo.minDelay = 40 * 1000;  // microseconds
    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
    mSensorInfo.fifoReservedEventCount = 0;
    mSensorInfo.fifoMaxEventCount = 0;
    mSensorInfo.requiredPermission = "";
    mSensorInfo.flags = static_cast<uint32_t>(SensorFlagBits::ON_CHANGE_MODE);
}

}  // namespace implementation
}  // namespace V2_X
}  // namespace sensors
}  // namespace hardware
}  // namespace android