/*
 * Copyright 2023 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "../InputDeviceMetricsCollector.h"

#include <NotifyArgsBuilders.h>
#include <gtest/gtest.h>
#include <input/InputEventBuilders.h>
#include <linux/input.h>

#include <array>
#include <tuple>

#include "TestInputListener.h"

namespace android {

using std::chrono_literals::operator""ns;
using std::chrono::nanoseconds;

namespace {

constexpr auto USAGE_TIMEOUT = 8765309ns;
constexpr auto TIME = 999999ns;

constexpr int32_t DEVICE_ID = 3;
constexpr int32_t DEVICE_ID_2 = 4;
constexpr int32_t VID = 0xFEED;
constexpr int32_t PID = 0xDEAD;
constexpr int32_t VERSION = 0xBEEF;
const std::string DEVICE_NAME = "Half Dome";
const std::string LOCATION = "California";
const std::string UNIQUE_ID = "Yosemite";
constexpr uint32_t TOUCHSCREEN = AINPUT_SOURCE_TOUCHSCREEN;
constexpr uint32_t STYLUS = AINPUT_SOURCE_STYLUS;

InputDeviceIdentifier generateTestIdentifier(int32_t id = DEVICE_ID) {
    InputDeviceIdentifier identifier;
    identifier.name = DEVICE_NAME + "_" + std::to_string(id);
    identifier.location = LOCATION;
    identifier.uniqueId = UNIQUE_ID;
    identifier.vendor = VID;
    identifier.product = PID;
    identifier.version = VERSION;
    identifier.bus = BUS_USB;
    return identifier;
}

InputDeviceInfo generateTestDeviceInfo(int32_t id = DEVICE_ID,
                                       uint32_t sources = TOUCHSCREEN | STYLUS) {
    auto info = InputDeviceInfo();
    info.initialize(id, /*generation=*/1, /*controllerNumber=*/1, generateTestIdentifier(id),
                    "alias", /*isExternal=*/false, /*hasMic=*/false, ui::LogicalDisplayId::INVALID);
    info.addSource(sources);
    return info;
}

const InputDeviceInfo TOUCHSCREEN_STYLUS_INFO = generateTestDeviceInfo(DEVICE_ID);
const InputDeviceInfo SECOND_TOUCHSCREEN_STYLUS_INFO = generateTestDeviceInfo(DEVICE_ID_2);

std::set<gui::Uid> uids(std::initializer_list<int32_t> vals) {
    std::set<gui::Uid> set;
    for (const auto val : vals) {
        set.emplace(val);
    }
    return set;
}

} // namespace

// --- InputDeviceMetricsCollectorTest ---

class InputDeviceMetricsCollectorTest : public testing::Test, public InputDeviceMetricsLogger {
protected:
    TestInputListener mTestListener;
    InputDeviceMetricsCollector mMetricsCollector{mTestListener, *this, USAGE_TIMEOUT};

    void assertUsageLogged(const InputDeviceInfo& info, nanoseconds duration,
                           std::optional<SourceUsageBreakdown> sourceBreakdown = {},
                           std::optional<UidUsageBreakdown> uidBreakdown = {}) {
        ASSERT_GE(mLoggedUsageSessions.size(), 1u);
        const auto& [loggedInfo, report] = *mLoggedUsageSessions.begin();
        const auto& i = info.getIdentifier();
        ASSERT_EQ(info.getId(), loggedInfo.deviceId);
        ASSERT_EQ(i.vendor, loggedInfo.vendor);
        ASSERT_EQ(i.product, loggedInfo.product);
        ASSERT_EQ(i.version, loggedInfo.version);
        ASSERT_EQ(i.bus, loggedInfo.bus);
        ASSERT_EQ(info.getUsiVersion().has_value(), loggedInfo.isUsiStylus);
        ASSERT_EQ(duration, report.usageDuration);
        if (sourceBreakdown) {
            ASSERT_EQ(sourceBreakdown, report.sourceBreakdown);
        }
        if (uidBreakdown) {
            ASSERT_EQ(uidBreakdown, report.uidBreakdown);
        }
        mLoggedUsageSessions.erase(mLoggedUsageSessions.begin());
    }

    void assertUsageNotLogged() { ASSERT_TRUE(mLoggedUsageSessions.empty()); }

    void setCurrentTime(nanoseconds time) { mCurrentTime = time; }

    nsecs_t currentTime() const { return mCurrentTime.count(); }

    NotifyMotionArgs generateMotionArgs(int32_t deviceId,
                                        uint32_t source = AINPUT_SOURCE_TOUCHSCREEN,
                                        std::vector<ToolType> toolTypes = {ToolType::FINGER}) {
        MotionArgsBuilder builder(AMOTION_EVENT_ACTION_MOVE, source);
        for (size_t i = 0; i < toolTypes.size(); i++) {
            builder.pointer(PointerBuilder(i, toolTypes[i]));
        }
        return builder.deviceId(deviceId)
                .eventTime(mCurrentTime.count())
                .downTime(mCurrentTime.count())
                .build();
    }

private:
    std::vector<std::tuple<MetricsDeviceInfo, DeviceUsageReport>> mLoggedUsageSessions;
    nanoseconds mCurrentTime{TIME};

    nanoseconds getCurrentTime() override { return mCurrentTime; }

    void logInputDeviceUsageReported(const MetricsDeviceInfo& info,
                                     const DeviceUsageReport& report) override {
        mLoggedUsageSessions.emplace_back(info, report);
    }
};

TEST_F(InputDeviceMetricsCollectorTest, DontLogUsageWhenDeviceNotRegistered) {
    // Device was used.
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mTestListener.assertNotifyMotionWasCalled();
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Device was used again after the usage timeout expired, but we still don't log usage.
    setCurrentTime(TIME + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mTestListener.assertNotifyMotionWasCalled();
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
}

TEST_F(InputDeviceMetricsCollectorTest, DontLogUsageForIgnoredDevices) {
    constexpr static std::array<int32_t, 2> ignoredDevices{
            {INVALID_INPUT_DEVICE_ID, VIRTUAL_KEYBOARD_ID}};

    for (int32_t ignoredDeviceId : ignoredDevices) {
        mMetricsCollector.notifyInputDevicesChanged(
                {/*id=*/0, {generateTestDeviceInfo(ignoredDeviceId)}});

        // Device was used.
        mMetricsCollector.notifyMotion(generateMotionArgs(ignoredDeviceId));
        mTestListener.assertNotifyMotionWasCalled();
        mMetricsCollector.notifyDeviceInteraction(ignoredDeviceId, TIME.count(), uids({0, 1, 2}));
        ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

        // Device was used again after the usage timeout expired, but we still don't log usage.
        setCurrentTime(TIME + USAGE_TIMEOUT);
        mMetricsCollector.notifyMotion(generateMotionArgs(ignoredDeviceId));
        mTestListener.assertNotifyMotionWasCalled();
        ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

        // Remove the ignored device, and ensure we still don't log usage.
        mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {}});
        ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
    }
}

TEST_F(InputDeviceMetricsCollectorTest, LogsSingleEventUsageSession) {
    mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {TOUCHSCREEN_STYLUS_INFO}});

    // Device was used.
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Device was used again after the usage timeout.
    setCurrentTime(TIME + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    // The usage session has zero duration because it consisted of only one event.
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 0ns));
}

TEST_F(InputDeviceMetricsCollectorTest, LogsMultipleEventUsageSession) {
    mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {TOUCHSCREEN_STYLUS_INFO}});

    // Device was used.
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Device was used again after some time.
    setCurrentTime(TIME + 21ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));

    setCurrentTime(TIME + 42ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));

    // Device was used again after the usage timeout.
    setCurrentTime(TIME + 42ns + 2 * USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 42ns));
}

TEST_F(InputDeviceMetricsCollectorTest, RemovingDeviceEndsUsageSession) {
    mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {TOUCHSCREEN_STYLUS_INFO}});

    // Device was used.
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Device was used again after some time.
    setCurrentTime(TIME + 21ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));

    // The device was removed before the usage timeout expired.
    setCurrentTime(TIME + 42ns);
    mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {}});
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 21ns));
}

TEST_F(InputDeviceMetricsCollectorTest, TracksUsageFromDifferentDevicesIndependently) {
    mMetricsCollector.notifyInputDevicesChanged(
            {/*id=*/0, {TOUCHSCREEN_STYLUS_INFO, SECOND_TOUCHSCREEN_STYLUS_INFO}});

    // Device 1 was used.
    setCurrentTime(TIME);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    setCurrentTime(TIME + 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Device 2 was used.
    setCurrentTime(TIME + 200ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID_2));
    setCurrentTime(TIME + 400ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID_2));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Device 1 was used after its usage timeout expired. Its usage session is reported.
    setCurrentTime(TIME + 300ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 100ns));

    // Device 2 was used.
    setCurrentTime(TIME + 350ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID_2));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Device 1 was used.
    setCurrentTime(TIME + 500ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Device 2 is not used for a while, but Device 1 is used again.
    setCurrentTime(TIME + 400ns + (2 * USAGE_TIMEOUT));
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    // Since Device 2's usage session ended, its usage should be reported.
    ASSERT_NO_FATAL_FAILURE(
            assertUsageLogged(SECOND_TOUCHSCREEN_STYLUS_INFO, 150ns + USAGE_TIMEOUT));

    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
}

TEST_F(InputDeviceMetricsCollectorTest, BreakdownUsageBySource) {
    mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {TOUCHSCREEN_STYLUS_INFO}});
    InputDeviceMetricsLogger::SourceUsageBreakdown expectedSourceBreakdown;

    // Use touchscreen.
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN));
    setCurrentTime(TIME + 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Use a stylus with the same input device.
    setCurrentTime(TIME + 200ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, STYLUS, {ToolType::STYLUS}));
    setCurrentTime(TIME + 400ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, STYLUS, {ToolType::STYLUS}));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Touchscreen was used again after its usage timeout expired.
    // This should be tracked as a separate usage of the source in the breakdown.
    setCurrentTime(TIME + 300ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    expectedSourceBreakdown.emplace_back(InputDeviceUsageSource::TOUCHSCREEN, 100ns);
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Continue stylus and touchscreen usages.
    setCurrentTime(TIME + 350ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, STYLUS, {ToolType::STYLUS}));
    setCurrentTime(TIME + 450ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Touchscreen was used after the stylus's usage timeout expired.
    // The stylus usage should be tracked in the source breakdown.
    setCurrentTime(TIME + 400ns + USAGE_TIMEOUT + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN));
    expectedSourceBreakdown.emplace_back(InputDeviceUsageSource::STYLUS_DIRECT,
                                         150ns + USAGE_TIMEOUT);
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Remove all devices to force the usage session to be logged.
    setCurrentTime(TIME + 500ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyInputDevicesChanged({});
    expectedSourceBreakdown.emplace_back(InputDeviceUsageSource::TOUCHSCREEN,
                                         100ns + USAGE_TIMEOUT);
    // Verify that only one usage session was logged for the device, and that session was broken
    // down by source correctly.
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(TOUCHSCREEN_STYLUS_INFO,
                                              400ns + USAGE_TIMEOUT + USAGE_TIMEOUT,
                                              expectedSourceBreakdown));

    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
}

TEST_F(InputDeviceMetricsCollectorTest, BreakdownUsageBySource_TrackSourceByDevice) {
    mMetricsCollector.notifyInputDevicesChanged(
            {/*id=*/0, {TOUCHSCREEN_STYLUS_INFO, SECOND_TOUCHSCREEN_STYLUS_INFO}});
    InputDeviceMetricsLogger::SourceUsageBreakdown expectedSourceBreakdown1;
    InputDeviceMetricsLogger::SourceUsageBreakdown expectedSourceBreakdown2;

    // Use both devices, with different sources.
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN));
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID_2, STYLUS, {ToolType::STYLUS}));
    setCurrentTime(TIME + 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN));
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID_2, STYLUS, {ToolType::STYLUS}));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Remove all devices to force the usage session to be logged.
    mMetricsCollector.notifyInputDevicesChanged({});
    expectedSourceBreakdown1.emplace_back(InputDeviceUsageSource::TOUCHSCREEN, 100ns);
    expectedSourceBreakdown2.emplace_back(InputDeviceUsageSource::STYLUS_DIRECT, 100ns);
    ASSERT_NO_FATAL_FAILURE(
            assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 100ns, expectedSourceBreakdown1));
    ASSERT_NO_FATAL_FAILURE(
            assertUsageLogged(SECOND_TOUCHSCREEN_STYLUS_INFO, 100ns, expectedSourceBreakdown2));

    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
}

TEST_F(InputDeviceMetricsCollectorTest, BreakdownUsageBySource_MultiSourceEvent) {
    mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {TOUCHSCREEN_STYLUS_INFO}});
    InputDeviceMetricsLogger::SourceUsageBreakdown expectedSourceBreakdown;

    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN | STYLUS, //
                                                      {ToolType::STYLUS}));
    setCurrentTime(TIME + 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN | STYLUS, //
                                                      {ToolType::STYLUS, ToolType::FINGER}));
    setCurrentTime(TIME + 200ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN | STYLUS, //
                                                      {ToolType::STYLUS, ToolType::FINGER}));
    setCurrentTime(TIME + 300ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN | STYLUS, //
                                                      {ToolType::FINGER}));
    setCurrentTime(TIME + 400ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID, TOUCHSCREEN | STYLUS, //
                                                      {ToolType::FINGER}));
    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());

    // Remove all devices to force the usage session to be logged.
    mMetricsCollector.notifyInputDevicesChanged({});
    expectedSourceBreakdown.emplace_back(InputDeviceUsageSource::STYLUS_DIRECT, 200ns);
    expectedSourceBreakdown.emplace_back(InputDeviceUsageSource::TOUCHSCREEN, 300ns);
    ASSERT_NO_FATAL_FAILURE(
            assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 400ns, expectedSourceBreakdown));

    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
}

TEST_F(InputDeviceMetricsCollectorTest, UidsNotTrackedWhenThereIsNoActiveSession) {
    mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {TOUCHSCREEN_STYLUS_INFO}});

    // Notify interaction with UIDs before the device is used.
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1}));

    // Use the device.
    setCurrentTime(TIME + 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    setCurrentTime(TIME + 200ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));

    // Notify interaction for the wrong device.
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID_2, currentTime(), uids({42}));

    // Notify interaction after usage session would have expired.
    // This interaction should not be tracked.
    setCurrentTime(TIME + 200ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({2, 3}));

    // Use the device again, by starting a new usage session.
    setCurrentTime(TIME + 300ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));

    // The first usage session is logged.
    static const UidUsageBreakdown emptyBreakdown;
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 100ns,
                                              /*sourceBreakdown=*/{},
                                              /*uidBreakdown=*/emptyBreakdown));

    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
}

TEST_F(InputDeviceMetricsCollectorTest, BreakdownUsageByUid) {
    mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {TOUCHSCREEN_STYLUS_INFO}});
    UidUsageBreakdown expectedUidBreakdown;

    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1}));

    setCurrentTime(TIME + 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1, 2}));
    setCurrentTime(TIME + 200ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1, 2, 3}));

    expectedUidBreakdown.emplace_back(1, 200ns);
    expectedUidBreakdown.emplace_back(2, 100ns);
    expectedUidBreakdown.emplace_back(3, 0ns);

    // Remove the device to force the usage session to be logged.
    mMetricsCollector.notifyInputDevicesChanged({});
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 200ns,
                                              /*sourceBreakdown=*/{}, expectedUidBreakdown));

    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
}

TEST_F(InputDeviceMetricsCollectorTest, BreakdownUsageByUid_TracksMultipleSessionsForUid) {
    mMetricsCollector.notifyInputDevicesChanged({/*id=*/0, {TOUCHSCREEN_STYLUS_INFO}});
    UidUsageBreakdown expectedUidBreakdown;

    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1, 2}));
    setCurrentTime(TIME + 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1, 2}));

    setCurrentTime(TIME + 200ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1}));

    setCurrentTime(TIME + 300ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1, 3}));
    setCurrentTime(TIME + 400ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1, 3}));

    setCurrentTime(TIME + 200ns + USAGE_TIMEOUT);
    expectedUidBreakdown.emplace_back(2, 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({4}));

    setCurrentTime(TIME + 300ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1, 4}));

    setCurrentTime(TIME + 400ns + USAGE_TIMEOUT);
    expectedUidBreakdown.emplace_back(3, 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({2, 3}));

    setCurrentTime(TIME + 500ns + USAGE_TIMEOUT);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({3}));

    // Remove the device to force the usage session to be logged.
    mMetricsCollector.notifyInputDevicesChanged({});
    expectedUidBreakdown.emplace_back(1, 300ns + USAGE_TIMEOUT);
    expectedUidBreakdown.emplace_back(2, 0ns);
    expectedUidBreakdown.emplace_back(3, 100ns);
    expectedUidBreakdown.emplace_back(4, 100ns);
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 500ns + USAGE_TIMEOUT,
                                              /*sourceBreakdown=*/{}, expectedUidBreakdown));

    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
}

TEST_F(InputDeviceMetricsCollectorTest, BreakdownUsageByUid_TracksUidsByDevice) {
    mMetricsCollector.notifyInputDevicesChanged(
            {/*id=*/0, {TOUCHSCREEN_STYLUS_INFO, SECOND_TOUCHSCREEN_STYLUS_INFO}});
    UidUsageBreakdown expectedUidBreakdown1;
    UidUsageBreakdown expectedUidBreakdown2;

    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1, 2}));

    setCurrentTime(TIME + 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID_2));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID_2, currentTime(), uids({1, 3}));

    setCurrentTime(TIME + 200ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID, currentTime(), uids({1, 2}));
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID_2));
    mMetricsCollector.notifyDeviceInteraction(DEVICE_ID_2, currentTime(), uids({1, 3}));

    setCurrentTime(TIME + 200ns + USAGE_TIMEOUT);
    expectedUidBreakdown1.emplace_back(1, 200ns);
    expectedUidBreakdown1.emplace_back(2, 200ns);
    expectedUidBreakdown2.emplace_back(1, 100ns);
    expectedUidBreakdown2.emplace_back(3, 100ns);
    mMetricsCollector.notifyMotion(generateMotionArgs(DEVICE_ID));
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(TOUCHSCREEN_STYLUS_INFO, 200ns,
                                              /*sourceBreakdown=*/{}, expectedUidBreakdown1));
    ASSERT_NO_FATAL_FAILURE(assertUsageLogged(SECOND_TOUCHSCREEN_STYLUS_INFO, 100ns,
                                              /*sourceBreakdown=*/{}, expectedUidBreakdown2));

    ASSERT_NO_FATAL_FAILURE(assertUsageNotLogged());
}

} // namespace android