/* ------------------------------------------------------------------ * Copyright (C) 1998-2009 PacketVideo * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either * express or implied. * See the License for the specific language governing permissions * and limitations under the License. * ------------------------------------------------------------------- */ /**************************************************************************************** Portions of this file are derived from the following 3GPP standard: 3GPP TS 26.073 ANSI-C code for the Adaptive Multi-Rate (AMR) speech codec Available from http://www.3gpp.org (C) 2004, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TTA, TTC) Permission to distribute, modify and use this file under the standard license terms listed above has been obtained from the copyright holder. ****************************************************************************************/ /* ------------------------------------------------------------------------------ Pathname: ./audio/gsm-amr/c/src/c1035pf.c Functions: q_p build_code code_10i40_35bits Date: 09/28/2000 ------------------------------------------------------------------------------ REVISION HISTORY Description: Updated template. Cleaned up code. Passing in a pointer to overflow flag for build_code() and code_10i40_35bits() functions. Removed unnecessary header files. Description: 1. Eliminated unused include files. 2. Replaced array addressing by pointers 3. Eliminated math operations that unnecessary checked for saturation 4. Replaced for-loops with memset() Description: Changed function name to pv_round to avoid conflict with round function in C standard library. Description: Replaced OSCL mem type functions and eliminated include files that now are chosen by OSCL definitions Description: Replaced "int" and/or "char" with OSCL defined types. Description: ------------------------------------------------------------------------------ MODULE DESCRIPTION This file contains the function that searches a 35 bit algebraic codebook containing 10 pulses in a frame of 40 samples. ------------------------------------------------------------------------------ */ /*---------------------------------------------------------------------------- ; INCLUDES ----------------------------------------------------------------------------*/ #include #include "c1035pf.h" #include "cnst.h" #include "basic_op.h" #include "inv_sqrt.h" #include "set_sign.h" #include "cor_h.h" #include "cor_h_x.h" #include "s10_8pf.h" /*---------------------------------------------------------------------------- ; MACROS ; [Define module specific macros here] ----------------------------------------------------------------------------*/ /*---------------------------------------------------------------------------- ; DEFINES ; [Include all pre-processor statements here. Include conditional ; compile variables also.] ----------------------------------------------------------------------------*/ #define NB_PULSE 10 /*---------------------------------------------------------------------------- ; LOCAL FUNCTION DEFINITIONS ; [List function prototypes here] ----------------------------------------------------------------------------*/ /*---------------------------------------------------------------------------- ; LOCAL VARIABLE DEFINITIONS ; [Variable declaration - defined here and used outside this module] ----------------------------------------------------------------------------*/ /* ------------------------------------------------------------------------------ FUNCTION NAME: q_p ------------------------------------------------------------------------------ INPUT AND OUTPUT DEFINITIONS Inputs: pShift_reg = pointer to Old CN generator shift register state (Word32) no_bits = Number of bits (Word16) Outputs: pShift_reg -> Updated CN generator shift register state Returns: noise_bits = Generated random integer value (Word16) Global Variables Used: None Local Variables Needed: None ------------------------------------------------------------------------------ FUNCTION DESCRIPTION This is a local function that determnes the index of the pulses by looking up the gray encoder table ------------------------------------------------------------------------------ REQUIREMENTS None ------------------------------------------------------------------------------ REFERENCES c1035pf.c, UMTS GSM AMR speech codec, R99 - Version 3.2.0, March 2, 2001 ------------------------------------------------------------------------------ PSEUDO-CODE void q_p ( Word16 *ind, // Pulse position Word16 n // Pulse number ) { Word16 tmp; tmp = *ind; if (sub (n, 5) < 0) { *ind = (tmp & 0x8) | gray[tmp & 0x7]; } else { *ind = gray[tmp & 0x7]; } } ------------------------------------------------------------------------------ RESOURCES USED [optional] When the code is written for a specific target processor the the resources used should be documented below. HEAP MEMORY USED: x bytes STACK MEMORY USED: x bytes CLOCK CYCLES: (cycle count equation for this function) + (variable used to represent cycle count for each subroutine called) where: (cycle count variable) = cycle count for [subroutine name] ------------------------------------------------------------------------------ CAUTION [optional] [State any special notes, constraints or cautions for users of this function] ------------------------------------------------------------------------------ */ /*---------------------------------------------------------------------------- ; FUNCTION CODE ----------------------------------------------------------------------------*/ void q_p( Word16 *pInd, /* Pulse position */ Word16 n /* Pulse number */ ) { Word16 tmp; tmp = *pInd; if (n < 5) { *pInd = (tmp & 0x8) | gray[tmp & 0x7]; } else { *pInd = gray[tmp & 0x7]; } } /* ------------------------------------------------------------------------------ FUNCTION NAME: build_code ------------------------------------------------------------------------------ INPUT AND OUTPUT DEFINITIONS Inputs: pSeed = pointer to the Old CN generator shift register state (Word32) n_param = Number of parameters to randomize (Word16) param_size_table = table holding paameter sizes (Word16) param[] = array to hold CN generated paramters (Word16) pOverflow = pointer to overflow flag (Flag) Outputs: param[] = CN generated parameters (Word16) pSeed = Updated CN generator shift register state (Word16) pOverflow -> 1 if overflow occured Returns: None Global Variables Used: None Local Variables Needed: None ------------------------------------------------------------------------------ FUNCTION DESCRIPTION This function builds the codeword, the filtered codeword and index of the codevector, based on the signs and positions of 10 pulses. ------------------------------------------------------------------------------ REQUIREMENTS None ------------------------------------------------------------------------------ REFERENCES c1035pf.c, UMTS GSM AMR speech codec, R99 - Version 3.2.0, March 2, 2001 ------------------------------------------------------------------------------ PSEUDO-CODE static void build_code ( Word16 codvec[], // (i) : position of pulses Word16 sign[], // (i) : sign of d[n] Word16 cod[], // (o) : innovative code vector Word16 h[], // (i) : impulse response of weighted synthesis filter Word16 y[], // (o) : filtered innovative code Word16 indx[] // (o) : index of 10 pulses (sign+position) ) { Word16 i, j, k, track, index, _sign[NB_PULSE]; Word16 *p0, *p1, *p2, *p3, *p4, *p5, *p6, *p7, *p8, *p9; Word32 s; for (i = 0; i < L_CODE; i++) { cod[i] = 0; } for (i = 0; i < NB_TRACK; i++) { indx[i] = -1; } for (k = 0; k < NB_PULSE; k++) { // read pulse position i = codvec[k]; // read sign j = sign[i]; index = mult (i, 6554); // index = pos/5 // track = pos%5 track = sub (i, extract_l (L_shr (L_mult (index, 5), 1))); if (j > 0) { cod[i] = add (cod[i], 4096); _sign[k] = 8192; } else { cod[i] = sub (cod[i], 4096); _sign[k] = -8192; index = add (index, 8); } if (indx[track] < 0) { indx[track] = index; } else { if (((index ^ indx[track]) & 8) == 0) { // sign of 1st pulse == sign of 2nd pulse if (sub (indx[track], index) <= 0) { indx[track + 5] = index; } else { indx[track + 5] = indx[track]; indx[track] = index; } } else { // sign of 1st pulse != sign of 2nd pulse if (sub ((Word16)(indx[track] & 7), (Word16)(index & 7)) <= 0) { indx[track + 5] = indx[track]; indx[track] = index; } else { indx[track + 5] = index; } } } } p0 = h - codvec[0]; p1 = h - codvec[1]; p2 = h - codvec[2]; p3 = h - codvec[3]; p4 = h - codvec[4]; p5 = h - codvec[5]; p6 = h - codvec[6]; p7 = h - codvec[7]; p8 = h - codvec[8]; p9 = h - codvec[9]; for (i = 0; i < L_CODE; i++) { s = 0; s = L_mac (s, *p0++, _sign[0]); s = L_mac (s, *p1++, _sign[1]); s = L_mac (s, *p2++, _sign[2]); s = L_mac (s, *p3++, _sign[3]); s = L_mac (s, *p4++, _sign[4]); s = L_mac (s, *p5++, _sign[5]); s = L_mac (s, *p6++, _sign[6]); s = L_mac (s, *p7++, _sign[7]); s = L_mac (s, *p8++, _sign[8]); s = L_mac (s, *p9++, _sign[9]); y[i] = pv_round (s); } } ------------------------------------------------------------------------------ RESOURCES USED [optional] When the code is written for a specific target processor the the resources used should be documented below. HEAP MEMORY USED: x bytes STACK MEMORY USED: x bytes CLOCK CYCLES: (cycle count equation for this function) + (variable used to represent cycle count for each subroutine called) where: (cycle count variable) = cycle count for [subroutine name] ------------------------------------------------------------------------------ CAUTION [optional] [State any special notes, constraints or cautions for users of this function] ------------------------------------------------------------------------------ */ /*---------------------------------------------------------------------------- ; FUNCTION CODE ----------------------------------------------------------------------------*/ static void build_code( Word16 codvec[], /* (i) : position of pulses */ Word16 sign[], /* (i) : sign of d[n] */ Word16 cod[], /* (o) : innovative code vector */ Word16 h[], /* (i) : impulse response of weighted synthesis filter*/ Word16 y[], /* (o) : filtered innovative code */ Word16 indx[], /* (o) : index of 10 pulses (sign+position) */ Flag *pOverflow /* i/o : overflow Flag */ ) { Word16 i, k, track, index, _sign[NB_PULSE]; Word16 *p0, *p1, *p2, *p3, *p4, *p5, *p6, *p7, *p8, *p9; Word32 s; Word16 temp; Word16 *p__sign; Word16 *p_y; Word16 *p_codvec; OSCL_UNUSED_ARG(pOverflow); memset(cod, 0, L_CODE*sizeof(*cod)); memset(indx, 0xFF, NB_TRACK*sizeof(*indx)); p__sign = _sign; p0 = &codvec[0]; for (k = 0; k < NB_PULSE; k++) { /* read pulse position */ i = *(p0++); /* read sign */ index = ((Word32)i * 6554) >> 15; /* index = pos/5 */ /* track = pos%5 */ /* track = sub (i, extract_l (L_shr (L_mult (index, 5), 1))); */ track = i - (index * 5); if (sign[i] > 0) { cod[i] += 4096; *(p__sign++) = 8192; } else { cod[i] -= 4096; *(p__sign++) = -8192; /* index = add (index, 8); */ index += 8; } p1 = &indx[track]; temp = *p1; if (temp < 0) { *p1 = index; } else { if (((index ^ temp) & 8) == 0) { /* sign of 1st pulse == sign of 2nd pulse */ /* if (sub (indx[track], index) <= 0) */ if (temp <= index) { *(p1 + 5) = index; } else { *(p1 + 5) = temp; *p1 = index; } } else { /* sign of 1st pulse != sign of 2nd pulse */ /* if (sub ((Word16)(indx[track] & 7), (Word16)(index & 7)) <= 0) */ if ((temp & 7) <= (index & 7)) { *(p1 + 5) = temp; *p1 = index; } else { *(p1 + 5) = index; } } } } p_codvec = &codvec[0]; p0 = h - *(p_codvec++); p1 = h - *(p_codvec++); p2 = h - *(p_codvec++); p3 = h - *(p_codvec++); p4 = h - *(p_codvec++); p5 = h - *(p_codvec++); p6 = h - *(p_codvec++); p7 = h - *(p_codvec++); p8 = h - *(p_codvec++); p9 = h - *(p_codvec++); p_y = y; for (i = L_CODE; i != 0; i--) { p__sign = _sign; s = (*p0++ * *(p__sign++)) >> 7; s += (*p1++ * *(p__sign++)) >> 7; s += (*p2++ * *(p__sign++)) >> 7; s += (*p3++ * *(p__sign++)) >> 7; s += (*p4++ * *(p__sign++)) >> 7; s += (*p5++ * *(p__sign++)) >> 7; s += (*p6++ * *(p__sign++)) >> 7; s += (*p7++ * *(p__sign++)) >> 7; s += (*p8++ * *(p__sign++)) >> 7; s += (*p9++ * *(p__sign++)) >> 7; *(p_y++) = (s + 0x080) >> 8; } } /* ------------------------------------------------------------------------------ FUNCTION NAME: code_10i40_35bits ------------------------------------------------------------------------------ INPUT AND OUTPUT DEFINITIONS Inputs: pSeed = pointer to the Old CN generator shift register state (Word32) n_param = Number of parameters to randomize (Word16) param_size_table = table holding paameter sizes (Word16) param[] = array to hold CN generated paramters (Word16) pOverflow = pointer to overflow flag (Flag) Outputs: param[] = CN generated parameters (Word16) pSeed = Updated CN generator shift register state (Word16) pOverflow -> 1 if overflow occured Returns: None Global Variables Used: None Local Variables Needed: None ------------------------------------------------------------------------------ FUNCTION DESCRIPTION This function searches a 35 bit algebraic codebook containing 10 pulses in a frame of 40 samples. The code contains 10 nonzero pulses: i0...i9. All pulses can have two possible amplitudes: +1 or -1. The 40 positions in a subframe are divided into 5 tracks of interleaved positions. Each track contains two pulses. The pulses can have the following possible positions: i0, i5 : 0, 5, 10, 15, 20, 25, 30, 35. i1, i6 : 1, 6, 11, 16, 21, 26, 31, 36. i2, i7 : 2, 7, 12, 17, 22, 27, 32, 37. i3, i8 : 3, 8, 13, 18, 23, 28, 33, 38. i4, i9 : 4, 9, 14, 19, 24, 29, 34, 39. Each pair of pulses require 1 bit for their signs and 6 bits for their positions (3 bits + 3 bits). This results in a 35 bit codebook. The function determines the optimal pulse signs and positions, builds the codevector, and computes the filtered codevector. ------------------------------------------------------------------------------ REQUIREMENTS None ------------------------------------------------------------------------------ REFERENCES c1035pf.c, UMTS GSM AMR speech codec, R99 - Version 3.2.0, March 2, 2001 ------------------------------------------------------------------------------ PSEUDO-CODE void code_10i40_35bits ( Word16 x[], // (i) : target vector Word16 cn[], // (i) : residual after long term prediction Word16 h[], // (i) : impulse response of weighted synthesis filter // h[-L_subfr..-1] must be set to zero Word16 cod[], // (o) : algebraic (fixed) codebook excitation Word16 y[], // (o) : filtered fixed codebook excitation Word16 indx[] // (o) : index of 10 pulses (sign + position) ) { Word16 ipos[NB_PULSE], pos_max[NB_TRACK], codvec[NB_PULSE]; Word16 dn[L_CODE], sign[L_CODE]; Word16 rr[L_CODE][L_CODE], i; cor_h_x (h, x, dn, 2); set_sign12k2 (dn, cn, sign, pos_max, NB_TRACK, ipos, STEP); cor_h (h, sign, rr); search_10and8i40 (NB_PULSE, STEP, NB_TRACK, dn, rr, ipos, pos_max, codvec); build_code (codvec, sign, cod, h, y, indx); for (i = 0; i < 10; i++) { q_p (&indx[i], i); } return; } ------------------------------------------------------------------------------ RESOURCES USED [optional] When the code is written for a specific target processor the the resources used should be documented below. HEAP MEMORY USED: x bytes STACK MEMORY USED: x bytes CLOCK CYCLES: (cycle count equation for this function) + (variable used to represent cycle count for each subroutine called) where: (cycle count variable) = cycle count for [subroutine name] ------------------------------------------------------------------------------ CAUTION [optional] [State any special notes, constraints or cautions for users of this function] ------------------------------------------------------------------------------ */ /*---------------------------------------------------------------------------- ; FUNCTION CODE ----------------------------------------------------------------------------*/ void code_10i40_35bits( Word16 x[], /* (i) : target vector */ Word16 cn[], /* (i) : residual after long term prediction */ Word16 h[], /* (i) : impulse response of weighted synthesis filter h[-L_subfr..-1] must be set to zero */ Word16 cod[], /* (o) : algebraic (fixed) codebook excitation */ Word16 y[], /* (o) : filtered fixed codebook excitation */ Word16 indx[], /* (o) : index of 10 pulses (sign + position) */ Flag *pOverflow /* (i/o) : overflow Flag */ ) { Word16 ipos[NB_PULSE], pos_max[NB_TRACK], codvec[NB_PULSE]; Word16 dn[L_CODE], sign[L_CODE]; Word16 rr[L_CODE][L_CODE], i; cor_h_x(h, x, dn, 2, pOverflow); set_sign12k2(dn, cn, sign, pos_max, NB_TRACK, ipos, STEP, pOverflow); cor_h(h, sign, rr, pOverflow); search_10and8i40(NB_PULSE, STEP, NB_TRACK, dn, rr, ipos, pos_max, codvec, pOverflow); build_code(codvec, sign, cod, h, y, indx, pOverflow); for (i = 0; i < 10; i++) { q_p(&indx[i], i); } return; }