/*
 * Copyright (c) 2013-2024, Arm Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <assert.h>

#include <common/bl_common.h>
#include <common/debug.h>
#include <drivers/arm/smmu_v3.h>
#include <fconf_hw_config_getter.h>
#include <lib/fconf/fconf.h>
#include <lib/fconf/fconf_dyn_cfg_getter.h>
#include <lib/mmio.h>

#include <plat/arm/common/arm_config.h>
#include <plat/arm/common/plat_arm.h>
#include <plat/common/platform.h>

#include "fvp_private.h"

static const struct dyn_cfg_dtb_info_t *hw_config_info __unused;

void __init bl31_early_platform_setup2(u_register_t arg0,
		u_register_t arg1, u_register_t arg2, u_register_t arg3)
{
	/* Initialize the console to provide early debug support */
	arm_console_boot_init();

#if TRANSFER_LIST
	arm_bl31_early_platform_setup(arg0, arg1, arg2, arg3);
#else
#if !RESET_TO_BL31 && !RESET_TO_BL2
	const struct dyn_cfg_dtb_info_t *soc_fw_config_info;

	INFO("BL31 FCONF: FW_CONFIG address = %lx\n", (uintptr_t)arg1);
	/* Fill the properties struct with the info from the config dtb */
	fconf_populate("FW_CONFIG", arg1);

	soc_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, SOC_FW_CONFIG_ID);
	if (soc_fw_config_info != NULL) {
		arg1 = soc_fw_config_info->config_addr;
	}

	/*
	 * arg2 is currently holding the 'secure' address of HW_CONFIG.
	 * But arm_bl31_early_platform_setup() below expects the 'non-secure'
	 * address of HW_CONFIG (which it will pass to BL33).
	 * This why we need to override arg2 here.
	 */
	hw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, HW_CONFIG_ID);
	assert(hw_config_info != NULL);
	assert(hw_config_info->secondary_config_addr != 0UL);
	arg2 = hw_config_info->secondary_config_addr;
#endif /* !RESET_TO_BL31 && !RESET_TO_BL2 */
	arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
#endif /* TRANSFER_LIST */

	/* Initialize the platform config for future decision making */
	fvp_config_setup();

	/*
	 * Initialize the correct interconnect for this cluster during cold
	 * boot. No need for locks as no other CPU is active.
	 */
	fvp_interconnect_init();

	/*
	 * Enable coherency in interconnect for the primary CPU's cluster.
	 * Earlier bootloader stages might already do this (e.g. Trusted
	 * Firmware's BL1 does it) but we can't assume so. There is no harm in
	 * executing this code twice anyway.
	 * FVP PSCI code will enable coherency for other clusters.
	 */
	fvp_interconnect_enable();

	/* Initialize System level generic or SP804 timer */
	fvp_timer_init();

	/* On FVP RevC, initialize SMMUv3 */
	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_SMMUV3) != 0U) {
		if (smmuv3_security_init(PLAT_FVP_SMMUV3_BASE) != 0) {
			/*
			 * Don't proceed for smmuv3 initialization if the
			 * security init failed.
			 */
			return;
		}
		/* SMMUv3 initialization failure is not fatal */
		if (smmuv3_init(PLAT_FVP_SMMUV3_BASE) != 0) {
			WARN("Failed initializing SMMU.\n");
		}
	}
}

#if !TRANSFER_LIST
void __init bl31_plat_arch_setup(void)
{
	int rc __unused;
	uintptr_t hw_config_base_align __unused;
	size_t mapped_size_align __unused;

	arm_bl31_plat_arch_setup();

	/*
	 * For RESET_TO_BL31 systems, BL31 is the first bootloader to run.
	 * So there is no BL2 to load the HW_CONFIG dtb into memory before
	 * control is passed to BL31. The code below relies on dynamic mapping
	 * capability, which is not supported by xlat tables lib V1.
	 * TODO: remove the ARM_XLAT_TABLES_LIB_V1 check when its support
	 * gets deprecated.
	 */
#if !RESET_TO_BL31 && !RESET_TO_BL2 && !ARM_XLAT_TABLES_LIB_V1
	assert(hw_config_info != NULL);
	assert(hw_config_info->config_addr != 0UL);

	/* Page aligned address and size if necessary */
	hw_config_base_align = page_align(hw_config_info->config_addr, DOWN);
	mapped_size_align = page_align(hw_config_info->config_max_size, UP);

	if ((hw_config_info->config_addr != hw_config_base_align) &&
	    (hw_config_info->config_max_size == mapped_size_align)) {
		mapped_size_align += PAGE_SIZE;
	}

	/*
	 * map dynamically HW config region with its aligned base address and
	 * size
	 */
	rc = mmap_add_dynamic_region((unsigned long long)hw_config_base_align,
				     hw_config_base_align,
				     mapped_size_align,
				     MT_RO_DATA);
	if (rc != 0) {
		ERROR("Error while mapping HW_CONFIG device tree (%d).\n", rc);
		panic();
	}

	/* Populate HW_CONFIG device tree with the mapped address */
	fconf_populate("HW_CONFIG", hw_config_info->config_addr);

	/* unmap the HW_CONFIG memory region */
	rc = mmap_remove_dynamic_region(hw_config_base_align, mapped_size_align);
	if (rc != 0) {
		ERROR("Error while unmapping HW_CONFIG device tree (%d).\n",
		      rc);
		panic();
	}
#endif /* !RESET_TO_BL31 && !RESET_TO_BL2 && !ARM_XLAT_TABLES_LIB_V1 */
}
#endif /* TRANSFER_LIST */

unsigned int plat_get_syscnt_freq2(void)
{
	unsigned int counter_base_frequency;

#if !RESET_TO_BL31 && !RESET_TO_BL2
	/* Get the frequency through FCONF API for HW_CONFIG */
	counter_base_frequency = FCONF_GET_PROPERTY(hw_config, cpu_timer, clock_freq);
	if (counter_base_frequency > 0U) {
		return counter_base_frequency;
	}
#endif

	/* Read the frequency from Frequency modes table */
	counter_base_frequency = mmio_read_32(ARM_SYS_CNTCTL_BASE + CNTFID_OFF);

	/* The first entry of the frequency modes table must not be 0 */
	if (counter_base_frequency == 0U) {
		panic();
	}

	return counter_base_frequency;
}