/* SPDX-License-Identifier: BSD-2-Clause */ /******************************************************************************* * Copyright 2017-2018, Fraunhofer SIT sponsored by Infineon Technologies AG * All rights reserved. ******************************************************************************/ #ifdef HAVE_CONFIG_H #include #endif #include "tss2_mu.h" #include "tss2_sys.h" #include "tss2_esys.h" #include "esys_types.h" #include "esys_iutil.h" #include "esys_mu.h" #define LOGMODULE esys #include "util/log.h" #include "util/aux_util.h" /** One-Call function for TPM2_ECC_Parameters * * This function invokes the TPM2_ECC_Parameters command in a one-call * variant. This means the function will block until the TPM response is * available. All input parameters are const. The memory for non-simple output * parameters is allocated by the function implementation. * * @param[in,out] esysContext The ESYS_CONTEXT. * @param[in] shandle1 First session handle. * @param[in] shandle2 Second session handle. * @param[in] shandle3 Third session handle. * @param[in] curveID Parameter set selector. * @param[out] parameters ECC parameters for the selected curve. * (callee-allocated) * @retval TSS2_RC_SUCCESS if the function call was a success. * @retval TSS2_ESYS_RC_BAD_REFERENCE if the esysContext or required input * pointers or required output handle references are NULL. * @retval TSS2_ESYS_RC_BAD_CONTEXT: if esysContext corruption is detected. * @retval TSS2_ESYS_RC_MEMORY: if the ESAPI cannot allocate enough memory for * internal operations or return parameters. * @retval TSS2_ESYS_RC_BAD_SEQUENCE: if the context has an asynchronous * operation already pending. * @retval TSS2_ESYS_RC_INSUFFICIENT_RESPONSE: if the TPM's response does not * at least contain the tag, response length, and response code. * @retval TSS2_ESYS_RC_MALFORMED_RESPONSE: if the TPM's response is corrupted. * @retval TSS2_ESYS_RC_RSP_AUTH_FAILED: if the response HMAC from the TPM did not verify. * @retval TSS2_ESYS_RC_MULTIPLE_DECRYPT_SESSIONS: if more than one session has * the 'decrypt' attribute bit set. * @retval TSS2_ESYS_RC_MULTIPLE_ENCRYPT_SESSIONS: if more than one session has * the 'encrypt' attribute bit set. * @retval TSS2_ESYS_RC_NO_DECRYPT_PARAM: if one of the sessions has the * 'decrypt' attribute set and the command does not support encryption * of the first command parameter. * @retval TSS2_ESYS_RC_NO_ENCRYPT_PARAM: if one of the sessions has the * 'encrypt' attribute set and the command does not support encryption * of the first response parameter. * @retval TSS2_RCs produced by lower layers of the software stack may be * returned to the caller unaltered unless handled internally. */ TSS2_RC Esys_ECC_Parameters( ESYS_CONTEXT *esysContext, ESYS_TR shandle1, ESYS_TR shandle2, ESYS_TR shandle3, TPMI_ECC_CURVE curveID, TPMS_ALGORITHM_DETAIL_ECC **parameters) { TSS2_RC r; r = Esys_ECC_Parameters_Async(esysContext, shandle1, shandle2, shandle3, curveID); return_if_error(r, "Error in async function"); /* Set the timeout to indefinite for now, since we want _Finish to block */ int32_t timeouttmp = esysContext->timeout; esysContext->timeout = -1; /* * Now we call the finish function, until return code is not equal to * from TSS2_BASE_RC_TRY_AGAIN. * Note that the finish function may return TSS2_RC_TRY_AGAIN, even if we * have set the timeout to -1. This occurs for example if the TPM requests * a retransmission of the command via TPM2_RC_YIELDED. */ do { r = Esys_ECC_Parameters_Finish(esysContext, parameters); /* This is just debug information about the reattempt to finish the command */ if ((r & ~TSS2_RC_LAYER_MASK) == TSS2_BASE_RC_TRY_AGAIN) LOG_DEBUG("A layer below returned TRY_AGAIN: %" PRIx32 " => resubmitting command", r); } while ((r & ~TSS2_RC_LAYER_MASK) == TSS2_BASE_RC_TRY_AGAIN); /* Restore the timeout value to the original value */ esysContext->timeout = timeouttmp; return_if_error(r, "Esys Finish"); return TSS2_RC_SUCCESS; } /** Asynchronous function for TPM2_ECC_Parameters * * This function invokes the TPM2_ECC_Parameters command in a asynchronous * variant. This means the function will return as soon as the command has been * sent downwards the stack to the TPM. All input parameters are const. * In order to retrieve the TPM's response call Esys_ECC_Parameters_Finish. * * @param[in,out] esysContext The ESYS_CONTEXT. * @param[in] shandle1 First session handle. * @param[in] shandle2 Second session handle. * @param[in] shandle3 Third session handle. * @param[in] curveID Parameter set selector. * @retval ESYS_RC_SUCCESS if the function call was a success. * @retval TSS2_ESYS_RC_BAD_REFERENCE if the esysContext or required input * pointers or required output handle references are NULL. * @retval TSS2_ESYS_RC_BAD_CONTEXT: if esysContext corruption is detected. * @retval TSS2_ESYS_RC_MEMORY: if the ESAPI cannot allocate enough memory for * internal operations or return parameters. * @retval TSS2_RCs produced by lower layers of the software stack may be returned to the caller unaltered unless handled internally. * @retval TSS2_ESYS_RC_MULTIPLE_DECRYPT_SESSIONS: if more than one session has * the 'decrypt' attribute bit set. * @retval TSS2_ESYS_RC_MULTIPLE_ENCRYPT_SESSIONS: if more than one session has * the 'encrypt' attribute bit set. * @retval TSS2_ESYS_RC_NO_DECRYPT_PARAM: if one of the sessions has the * 'decrypt' attribute set and the command does not support encryption * of the first command parameter. * @retval TSS2_ESYS_RC_NO_ENCRYPT_PARAM: if one of the sessions has the * 'encrypt' attribute set and the command does not support encryption * of the first response parameter. */ TSS2_RC Esys_ECC_Parameters_Async( ESYS_CONTEXT *esysContext, ESYS_TR shandle1, ESYS_TR shandle2, ESYS_TR shandle3, TPMI_ECC_CURVE curveID) { TSS2_RC r; LOG_TRACE("context=%p, curveID=%04"PRIx16"", esysContext, curveID); TSS2L_SYS_AUTH_COMMAND auths; /* Check context, sequence correctness and set state to error for now */ if (esysContext == NULL) { LOG_ERROR("esyscontext is NULL."); return TSS2_ESYS_RC_BAD_REFERENCE; } r = iesys_check_sequence_async(esysContext); if (r != TSS2_RC_SUCCESS) return r; esysContext->state = _ESYS_STATE_INTERNALERROR; /* Check input parameters */ r = check_session_feasibility(shandle1, shandle2, shandle3, 0); return_state_if_error(r, _ESYS_STATE_INIT, "Check session usage"); /* Initial invocation of SAPI to prepare the command buffer with parameters */ r = Tss2_Sys_ECC_Parameters_Prepare(esysContext->sys, curveID); return_state_if_error(r, _ESYS_STATE_INIT, "SAPI Prepare returned error."); /* Calculate the cpHash Values */ r = init_session_tab(esysContext, shandle1, shandle2, shandle3); return_state_if_error(r, _ESYS_STATE_INIT, "Initialize session resources"); iesys_compute_session_value(esysContext->session_tab[0], NULL, NULL); iesys_compute_session_value(esysContext->session_tab[1], NULL, NULL); iesys_compute_session_value(esysContext->session_tab[2], NULL, NULL); /* Generate the auth values and set them in the SAPI command buffer */ r = iesys_gen_auths(esysContext, NULL, NULL, NULL, &auths); return_state_if_error(r, _ESYS_STATE_INIT, "Error in computation of auth values"); esysContext->authsCount = auths.count; if (auths.count > 0) { r = Tss2_Sys_SetCmdAuths(esysContext->sys, &auths); return_state_if_error(r, _ESYS_STATE_INIT, "SAPI error on SetCmdAuths"); } /* Trigger execution and finish the async invocation */ r = Tss2_Sys_ExecuteAsync(esysContext->sys); return_state_if_error(r, _ESYS_STATE_INTERNALERROR, "Finish (Execute Async)"); esysContext->state = _ESYS_STATE_SENT; return r; } /** Asynchronous finish function for TPM2_ECC_Parameters * * This function returns the results of a TPM2_ECC_Parameters command * invoked via Esys_ECC_Parameters_Finish. All non-simple output parameters * are allocated by the function's implementation. NULL can be passed for every * output parameter if the value is not required. * * @param[in,out] esysContext The ESYS_CONTEXT. * @param[out] parameters ECC parameters for the selected curve. * (callee-allocated) * @retval TSS2_RC_SUCCESS on success * @retval ESYS_RC_SUCCESS if the function call was a success. * @retval TSS2_ESYS_RC_BAD_REFERENCE if the esysContext or required input * pointers or required output handle references are NULL. * @retval TSS2_ESYS_RC_BAD_CONTEXT: if esysContext corruption is detected. * @retval TSS2_ESYS_RC_MEMORY: if the ESAPI cannot allocate enough memory for * internal operations or return parameters. * @retval TSS2_ESYS_RC_BAD_SEQUENCE: if the context has an asynchronous * operation already pending. * @retval TSS2_ESYS_RC_TRY_AGAIN: if the timeout counter expires before the * TPM response is received. * @retval TSS2_ESYS_RC_INSUFFICIENT_RESPONSE: if the TPM's response does not * at least contain the tag, response length, and response code. * @retval TSS2_ESYS_RC_RSP_AUTH_FAILED: if the response HMAC from the TPM did * not verify. * @retval TSS2_ESYS_RC_MALFORMED_RESPONSE: if the TPM's response is corrupted. * @retval TSS2_RCs produced by lower layers of the software stack may be * returned to the caller unaltered unless handled internally. */ TSS2_RC Esys_ECC_Parameters_Finish( ESYS_CONTEXT *esysContext, TPMS_ALGORITHM_DETAIL_ECC **parameters) { TSS2_RC r; LOG_TRACE("context=%p, parameters=%p", esysContext, parameters); if (esysContext == NULL) { LOG_ERROR("esyscontext is NULL."); return TSS2_ESYS_RC_BAD_REFERENCE; } /* Check for correct sequence and set sequence to irregular for now */ if (esysContext->state != _ESYS_STATE_SENT && esysContext->state != _ESYS_STATE_RESUBMISSION) { LOG_ERROR("Esys called in bad sequence."); return TSS2_ESYS_RC_BAD_SEQUENCE; } esysContext->state = _ESYS_STATE_INTERNALERROR; /* Allocate memory for response parameters */ if (parameters != NULL) { *parameters = calloc(sizeof(TPMS_ALGORITHM_DETAIL_ECC), 1); if (*parameters == NULL) { return_error(TSS2_ESYS_RC_MEMORY, "Out of memory"); } } /*Receive the TPM response and handle resubmissions if necessary. */ r = Tss2_Sys_ExecuteFinish(esysContext->sys, esysContext->timeout); if ((r & ~TSS2_RC_LAYER_MASK) == TSS2_BASE_RC_TRY_AGAIN) { LOG_DEBUG("A layer below returned TRY_AGAIN: %" PRIx32, r); esysContext->state = _ESYS_STATE_SENT; goto error_cleanup; } /* This block handle the resubmission of TPM commands given a certain set of * TPM response codes. */ if (r == TPM2_RC_RETRY || r == TPM2_RC_TESTING || r == TPM2_RC_YIELDED) { LOG_DEBUG("TPM returned RETRY, TESTING or YIELDED, which triggers a " "resubmission: %" PRIx32, r); if (esysContext->submissionCount++ >= _ESYS_MAX_SUBMISSIONS) { LOG_WARNING("Maximum number of (re)submissions has been reached."); esysContext->state = _ESYS_STATE_INIT; goto error_cleanup; } esysContext->state = _ESYS_STATE_RESUBMISSION; r = Tss2_Sys_ExecuteAsync(esysContext->sys); if (r != TSS2_RC_SUCCESS) { LOG_WARNING("Error attempting to resubmit"); /* We do not set esysContext->state here but inherit the most recent * state of the _async function. */ goto error_cleanup; } r = TSS2_ESYS_RC_TRY_AGAIN; LOG_DEBUG("Resubmission initiated and returning RC_TRY_AGAIN."); goto error_cleanup; } /* The following is the "regular error" handling. */ if (iesys_tpm_error(r)) { LOG_WARNING("Received TPM Error"); esysContext->state = _ESYS_STATE_INIT; goto error_cleanup; } else if (r != TSS2_RC_SUCCESS) { LOG_ERROR("Received a non-TPM Error"); esysContext->state = _ESYS_STATE_INTERNALERROR; goto error_cleanup; } /* * Now the verification of the response (hmac check) and if necessary the * parameter decryption have to be done. */ r = iesys_check_response(esysContext); goto_state_if_error(r, _ESYS_STATE_INTERNALERROR, "Error: check response", error_cleanup); /* * After the verification of the response we call the complete function * to deliver the result. */ r = Tss2_Sys_ECC_Parameters_Complete(esysContext->sys, (parameters != NULL) ? *parameters : NULL); goto_state_if_error(r, _ESYS_STATE_INTERNALERROR, "Received error from SAPI unmarshaling" , error_cleanup); esysContext->state = _ESYS_STATE_INIT; return TSS2_RC_SUCCESS; error_cleanup: if (parameters != NULL) SAFE_FREE(*parameters); return r; }