/*
 *  Copyright (c) 2019, The OpenThread Authors.
 *  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *  3. Neither the name of the copyright holder nor the
 *     names of its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 */

/**
 * @file
 *   This file includes compile-time configurations for the NCP.
 *
 */

#ifndef CONFIG_NCP_H_
#define CONFIG_NCP_H_

#ifndef OPENTHREAD_RADIO
#define OPENTHREAD_RADIO 0
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_SPI_ENABLE
 *
 * Define to 1 to enable NCP SPI support.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_SPI_ENABLE
#define OPENTHREAD_CONFIG_NCP_SPI_ENABLE 0
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_HDLC_ENABLE
 *
 * Define to 1 to enable NCP HDLC support.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_HDLC_ENABLE
#define OPENTHREAD_CONFIG_NCP_HDLC_ENABLE 0
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_TX_BUFFER_SIZE
 *
 * The size of NCP message buffer in bytes.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_TX_BUFFER_SIZE
#define OPENTHREAD_CONFIG_NCP_TX_BUFFER_SIZE 2048
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_HDLC_TX_CHUNK_SIZE
 *
 * The size of NCP HDLC TX chunk in bytes.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_HDLC_TX_CHUNK_SIZE
#define OPENTHREAD_CONFIG_NCP_HDLC_TX_CHUNK_SIZE 2048
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_HDLC_RX_BUFFER_SIZE
 *
 * The size of NCP HDLC RX buffer in bytes.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_HDLC_RX_BUFFER_SIZE
#if OPENTHREAD_RADIO
#define OPENTHREAD_CONFIG_NCP_HDLC_RX_BUFFER_SIZE 512
#else
#define OPENTHREAD_CONFIG_NCP_HDLC_RX_BUFFER_SIZE 1300
#endif
#endif // OPENTHREAD_CONFIG_NCP_HDLC_RX_BUFFER_SIZE

/**
 * @def OPENTHREAD_CONFIG_NCP_SPI_BUFFER_SIZE
 *
 * The size of NCP SPI (RX/TX) buffer in bytes.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_SPI_BUFFER_SIZE
#if OPENTHREAD_RADIO
#define OPENTHREAD_CONFIG_NCP_SPI_BUFFER_SIZE 512
#else
#define OPENTHREAD_CONFIG_NCP_SPI_BUFFER_SIZE 1300
#endif
#endif // OPENTHREAD_CONFIG_NCP_SPI_BUFFER_SIZE

/**
 * @def OPENTHREAD_CONFIG_NCP_SPINEL_ENCRYPTER_EXTRA_DATA_SIZE
 *
 * The size of extra data to be allocated in UART buffer,
 * needed by NCP Spinel Encrypter.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_SPINEL_ENCRYPTER_EXTRA_DATA_SIZE
#define OPENTHREAD_CONFIG_NCP_SPINEL_ENCRYPTER_EXTRA_DATA_SIZE 0
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_SPINEL_LOG_MAX_SIZE
 *
 * The maximum OpenThread log string size (number of chars) supported by NCP using Spinel `StreamWrite`.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_SPINEL_LOG_MAX_SIZE
#define OPENTHREAD_CONFIG_NCP_SPINEL_LOG_MAX_SIZE 150
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_ENABLE_PEEK_POKE
 *
 * Define as 1 to enable peek/poke functionality on NCP.
 *
 * Peek/Poke allows the host to read/write to memory addresses on NCP. This is intended for debugging.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_ENABLE_PEEK_POKE
#define OPENTHREAD_CONFIG_NCP_ENABLE_PEEK_POKE 0
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_SPINEL_RESPONSE_QUEUE_SIZE
 *
 * Size of NCP Spinel command response queue.
 *
 * NCP guarantees that it can respond up to `OPENTHREAD_CONFIG_NCP_SPINEL_RESPONSE_QUEUE_SIZE` spinel commands at the
 * same time. The spinel protocol defines a Transaction ID (TID) as part of spinel command frame (the TID can be
 * a value 0-15 where TID 0 is used for frames which require no response). Spinel protocol can support at most support
 * 15 simultaneous commands.
 *
 * The host driver implementation may further limit the number of simultaneous Spinel command frames (e.g., wpantund
 * limits this to two). This configuration option can be used to reduce the response queue size.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_SPINEL_RESPONSE_QUEUE_SIZE
#define OPENTHREAD_CONFIG_NCP_SPINEL_RESPONSE_QUEUE_SIZE 15
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_ENABLE_MCU_POWER_STATE_CONTROL
 *
 * Define to 1 to enable support controlling of desired power state of NCP's micro-controller.
 *
 * The power state specifies the desired power state of NCP's micro-controller (MCU) when the underlying platform's
 * operating system enters idle mode (i.e., all active tasks/events are processed and the MCU can potentially enter a
 * energy-saving power state).
 *
 * The power state primarily determines how the host should interact with the NCP and whether the host needs an
 * external trigger (a "poke") before it can communicate with the NCP or not.
 *
 * When enabled, the platform is expected to provide `otPlatSetMcuPowerState()` and `otPlatGetMcuPowerState()`
 * functions (please see `openthread/platform/misc.h`). Host can then control the power state using
 * `SPINEL_PROP_MCU_POWER_STATE`.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_ENABLE_MCU_POWER_STATE_CONTROL
#define OPENTHREAD_CONFIG_NCP_ENABLE_MCU_POWER_STATE_CONTROL 0
#endif

/**
 * @def OPENTHREAD_CONFIG_NCP_INFRA_IF_ENABLE
 *
 * Define to 1 to enable the NCP based implementation of platform InfraIf APIs.
 *
 */
#ifndef OPENTHREAD_CONFIG_NCP_INFRA_IF_ENABLE
#define OPENTHREAD_CONFIG_NCP_INFRA_IF_ENABLE 0
#endif

/**
 * @def OPENTHREAD_ENABLE_NCP_VENDOR_HOOK
 *
 * TODO: complete.
 *
 */
#ifndef OPENTHREAD_ENABLE_NCP_VENDOR_HOOK
#define OPENTHREAD_ENABLE_NCP_VENDOR_HOOK 0
#endif

#endif // CONFIG_NCP_H_