/* Microsoft Reference Implementation for TPM 2.0
 *
 *  The copyright in this software is being made available under the BSD License,
 *  included below. This software may be subject to other third party and
 *  contributor rights, including patent rights, and no such rights are granted
 *  under this license.
 *
 *  Copyright (c) Microsoft Corporation
 *
 *  All rights reserved.
 *
 *  BSD License
 *
 *  Redistribution and use in source and binary forms, with or without modification,
 *  are permitted provided that the following conditions are met:
 *
 *  Redistributions of source code must retain the above copyright notice, this list
 *  of conditions and the following disclaimer.
 *
 *  Redistributions in binary form must reproduce the above copyright notice, this
 *  list of conditions and the following disclaimer in the documentation and/or
 *  other materials provided with the distribution.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ""AS IS""
 *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 *  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 *  ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 *  (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
//** Introduction
// The functions in this file provide the low-level interface between the TPM code
// and the big number and elliptic curve math routines in OpenSSL.
//
// Most math on big numbers require a context. The context contains the memory in
// which OpenSSL creates and manages the big number values. When a OpenSSL math
// function will be called that modifies a BIGNUM value, that value must be created in
// an OpenSSL context. The first line of code in such a function must be:
// OSSL_ENTER(); and the last operation before returning must be OSSL_LEAVE().
// OpenSSL variables can then be created with BnNewVariable(). Constant values to be
// used by OpenSSL are created from the bigNum values passed to the functions in this
// file. Space for the BIGNUM control block is allocated in the stack of the
// function and then it is initialized by calling BigInitialized(). That function
// sets up the values in the BIGNUM structure and sets the data pointer to point to
// the data in the bignum_t. This is only used when the value is known to be a
// constant in the called function.
//
// Because the allocations of constants is on the local stack and the
// OSSL_ENTER()/OSSL_LEAVE() pair flushes everything created in OpenSSL memory, there
// should be no chance of a memory leak.

//** Includes and Defines
#include "Tpm.h"

#ifdef MATH_LIB_OSSL
#include "TpmToOsslMath_fp.h"

//** Functions

//*** OsslToTpmBn()
// This function converts an OpenSSL BIGNUM to a TPM bignum. In this implementation
// it is assumed that OpenSSL uses a different control structure but the same data
// layout -- an array of native-endian words in little-endian order.
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure because value will not fit or OpenSSL variable doesn't
//                      exist
BOOL
OsslToTpmBn(
    bigNum          bn,
    BIGNUM          *osslBn
    )
{
    VERIFY(osslBn != NULL);
    // If the bn is NULL, it means that an output value pointer was NULL meaning that
    // the results is simply to be discarded.
    if(bn != NULL)
    {
        int         i;
    //
        VERIFY((unsigned)osslBn->width <= BnGetAllocated(bn));
        for(i = 0; i < osslBn->width; i++)
            bn->d[i] = osslBn->d[i];
        BnSetTop(bn, osslBn->width);
    }
    return TRUE;
Error:
    return FALSE;
}

//*** BigInitialized()
// This function initializes an OSSL BIGNUM from a TPM bigConst. Do not use this for
// values that are passed to OpenSLL when they are not declared as const in the
// function prototype. Instead, use BnNewVariable().
BIGNUM *
BigInitialized(
    BIGNUM             *toInit,
    bigConst            initializer
    )
{
    if(initializer == NULL)
        FAIL(FATAL_ERROR_PARAMETER);
    if(toInit == NULL || initializer == NULL)
        return NULL;
    toInit->d = (BN_ULONG *)&initializer->d[0];
    toInit->dmax = (int)initializer->allocated;
    toInit->width = (int)initializer->size;
    toInit->neg = 0;
    toInit->flags = 0;
    return toInit;
}

#ifndef OSSL_DEBUG
#   define BIGNUM_PRINT(label, bn, eol)
#   define DEBUG_PRINT(x)
#else
#   define DEBUG_PRINT(x)   printf("%s", x)
#   define BIGNUM_PRINT(label, bn, eol) BIGNUM_print((label), (bn), (eol))

//*** BIGNUM_print()
static void
BIGNUM_print(
    const char      *label,
    const BIGNUM    *a,
    BOOL             eol
    )
{
    BN_ULONG        *d;
    int              i;
    int              notZero = FALSE;

    if(label != NULL)
        printf("%s", label);
    if(a == NULL)
    {
        printf("NULL");
        goto done;
    }
    if (a->neg)
        printf("-");
    for(i = a->top, d = &a->d[i - 1]; i > 0; i--)
    {
        int         j;
        BN_ULONG    l = *d--;
        for(j = BN_BITS2 - 8; j >= 0; j -= 8)
        {
            BYTE    b = (BYTE)((l >> j) & 0xFF);
            notZero = notZero || (b != 0);
            if(notZero)
                printf("%02x", b);
        }
        if(!notZero)
            printf("0");
    }
done:
    if(eol)
        printf("\n");
    return;
}
#endif

//*** BnNewVariable()
// This function allocates a new variable in the provided context. If the context
// does not exist or the allocation fails, it is a catastrophic failure.
static BIGNUM *
BnNewVariable(
    BN_CTX          *CTX
)
{
    BIGNUM          *new;
//
    // This check is intended to protect against calling this function without
    // having initialized the CTX.
    if((CTX == NULL) || ((new = BN_CTX_get(CTX)) == NULL))
        FAIL(FATAL_ERROR_ALLOCATION);
    return new;
}

#if LIBRARY_COMPATIBILITY_CHECK

//*** MathLibraryCompatibilityCheck()
BOOL
MathLibraryCompatibilityCheck(
    void
    )
{
    OSSL_ENTER();
    BIGNUM              *osslTemp = BnNewVariable(CTX);
    crypt_uword_t        i;
    BYTE                 test[] = {0x1F, 0x1E, 0x1D, 0x1C, 0x1B, 0x1A, 0x19, 0x18,
                                   0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10,
                                   0x0F, 0x0E, 0x0D, 0x0C, 0x0B, 0x0A, 0x09, 0x08,
                                   0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00};
    BN_VAR(tpmTemp, sizeof(test) * 8); // allocate some space for a test value
//
    // Convert the test data to a bigNum
    BnFromBytes(tpmTemp, test, sizeof(test));
    // Convert the test data to an OpenSSL BIGNUM
    BN_bin2bn(test, sizeof(test), osslTemp);
    // Make sure the values are consistent
    VERIFY(osslTemp->width == (int)tpmTemp->size);
    for(i = 0; i < tpmTemp->size; i++)
        VERIFY(osslTemp->d[i] == tpmTemp->d[i]);
    OSSL_LEAVE();
    return 1;
Error:
    return 0;
}
#endif

//*** BnModMult()
// This function does a modular multiply. It first does a multiply and then a divide
// and returns the remainder of the divide.
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation
LIB_EXPORT BOOL
BnModMult(
    bigNum              result,
    bigConst            op1,
    bigConst            op2,
    bigConst            modulus
    )
{
    OSSL_ENTER();
    BOOL                OK = TRUE;
    BIGNUM              *bnResult = BN_NEW();
    BIGNUM              *bnTemp = BN_NEW();
    BIG_INITIALIZED(bnOp1, op1);
    BIG_INITIALIZED(bnOp2, op2);
    BIG_INITIALIZED(bnMod, modulus);
//
    VERIFY(BN_mul(bnTemp, bnOp1, bnOp2, CTX));
    VERIFY(BN_div(NULL, bnResult, bnTemp, bnMod, CTX));
    VERIFY(OsslToTpmBn(result, bnResult));
    goto Exit;
Error:
    OK = FALSE;
Exit:
    OSSL_LEAVE();
    return OK;
}

//*** BnMult()
// Multiplies two numbers
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation
LIB_EXPORT BOOL
BnMult(
    bigNum               result,
    bigConst             multiplicand,
    bigConst             multiplier
    )
{
    OSSL_ENTER();
    BIGNUM              *bnTemp = BN_NEW();
    BOOL                 OK = TRUE;
    BIG_INITIALIZED(bnA, multiplicand);
    BIG_INITIALIZED(bnB, multiplier);
//
    VERIFY(BN_mul(bnTemp, bnA, bnB, CTX));
    VERIFY(OsslToTpmBn(result, bnTemp));
    goto Exit;
Error:
    OK = FALSE;
Exit:
    OSSL_LEAVE();
    return OK;
}

//*** BnDiv()
// This function divides two bigNum values. The function returns FALSE if
// there is an error in the operation.
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation
LIB_EXPORT BOOL
BnDiv(
    bigNum               quotient,
    bigNum               remainder,
    bigConst             dividend,
    bigConst             divisor
    )
{
    OSSL_ENTER();
    BIGNUM              *bnQ = BN_NEW();
    BIGNUM              *bnR = BN_NEW();
    BOOL                 OK = TRUE;
    BIG_INITIALIZED(bnDend, dividend);
    BIG_INITIALIZED(bnSor, divisor);
//
    if(BnEqualZero(divisor))
        FAIL(FATAL_ERROR_DIVIDE_ZERO);
    VERIFY(BN_div(bnQ, bnR, bnDend, bnSor, CTX));
    VERIFY(OsslToTpmBn(quotient, bnQ));
    VERIFY(OsslToTpmBn(remainder, bnR));
    DEBUG_PRINT("In BnDiv:\n");
    BIGNUM_PRINT("   bnDividend: ", bnDend, TRUE);
    BIGNUM_PRINT("    bnDivisor: ", bnSor, TRUE);
    BIGNUM_PRINT("   bnQuotient: ", bnQ, TRUE);
    BIGNUM_PRINT("  bnRemainder: ", bnR, TRUE);
    goto Exit;
Error:
    OK = FALSE;
Exit:
    OSSL_LEAVE();
    return OK;
}

#if ALG_RSA
//*** BnGcd()
// Get the greatest common divisor of two numbers
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation
LIB_EXPORT BOOL
BnGcd(
    bigNum      gcd,            // OUT: the common divisor
    bigConst    number1,        // IN:
    bigConst    number2         // IN:
    )
{
    OSSL_ENTER();
    BIGNUM              *bnGcd = BN_NEW();
    BOOL                 OK = TRUE;
    BIG_INITIALIZED(bn1, number1);
    BIG_INITIALIZED(bn2, number2);
//
    VERIFY(BN_gcd(bnGcd, bn1, bn2, CTX));
    VERIFY(OsslToTpmBn(gcd, bnGcd));
    goto Exit;
Error:
    OK = FALSE;
Exit:
    OSSL_LEAVE();
    return OK;
}

//***BnModExp()
// Do modular exponentiation using bigNum values. The conversion from a bignum_t to
// a bigNum is trivial as they are based on the same structure
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation
LIB_EXPORT BOOL
BnModExp(
    bigNum               result,         // OUT: the result
    bigConst             number,         // IN: number to exponentiate
    bigConst             exponent,       // IN:
    bigConst             modulus         // IN:
    )
{
    OSSL_ENTER();
    BIGNUM              *bnResult = BN_NEW();
    BOOL                 OK = TRUE;
    BIG_INITIALIZED(bnN, number);
    BIG_INITIALIZED(bnE, exponent);
    BIG_INITIALIZED(bnM, modulus);
//
    VERIFY(BN_mod_exp(bnResult, bnN, bnE, bnM, CTX));
    VERIFY(OsslToTpmBn(result, bnResult));
    goto Exit;
Error:
    OK = FALSE;
Exit:
    OSSL_LEAVE();
    return OK;
}

//*** BnModInverse()
// Modular multiplicative inverse
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation
LIB_EXPORT BOOL
BnModInverse(
    bigNum               result,
    bigConst             number,
    bigConst             modulus
    )
{
    OSSL_ENTER();
    BIGNUM              *bnResult = BN_NEW();
    BOOL                 OK = TRUE;
    BIG_INITIALIZED(bnN, number);
    BIG_INITIALIZED(bnM, modulus);
//
    VERIFY(BN_mod_inverse(bnResult, bnN, bnM, CTX) != NULL);
    VERIFY(OsslToTpmBn(result, bnResult));
    goto Exit;
Error:
    OK = FALSE;
Exit:
    OSSL_LEAVE();
    return OK;
}
#endif // ALG_RSA

#if ALG_ECC

//*** PointFromOssl()
// Function to copy the point result from an OSSL function to a bigNum
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation
static BOOL
PointFromOssl(
    bigPoint         pOut,      // OUT: resulting point
    EC_POINT        *pIn,       // IN: the point to return
    bigCurve         E          // IN: the curve
    )
{
    BIGNUM         *x = NULL;
    BIGNUM         *y = NULL;
    BOOL            OK;
    BN_CTX_start(E->CTX);
//
    x = BN_CTX_get(E->CTX);
    y = BN_CTX_get(E->CTX);

    if(y == NULL)
        FAIL(FATAL_ERROR_ALLOCATION);
    // If this returns false, then the point is at infinity
    OK = EC_POINT_get_affine_coordinates_GFp(E->G, pIn, x, y, E->CTX);
    if(OK)
    {
        OsslToTpmBn(pOut->x, x);
        OsslToTpmBn(pOut->y, y);
        BnSetWord(pOut->z, 1);
    }
    else
        BnSetWord(pOut->z, 0);
    BN_CTX_end(E->CTX);
    return OK;
}

//*** EcPointInitialized()
// Allocate and initialize a point.
static EC_POINT *
EcPointInitialized(
    pointConst          initializer,
    bigCurve            E
    )
{
    EC_POINT            *P = NULL;

    if(initializer != NULL)
    {
        BIG_INITIALIZED(bnX, initializer->x);
        BIG_INITIALIZED(bnY, initializer->y);
        if(E == NULL)
            FAIL(FATAL_ERROR_ALLOCATION);
        P = EC_POINT_new(E->G);
        if(!EC_POINT_set_affine_coordinates_GFp(E->G, P, bnX, bnY, E->CTX))
            P = NULL;
    }
    return P;
}

//*** BnCurveInitialize()
// This function initializes the OpenSSL curve information structure. This
// structure points to the TPM-defined values for the curve, to the context for the
// number values in the frame, and to the OpenSSL-defined group values.
//  Return Type: bigCurve *
//      NULL        the TPM_ECC_CURVE is not valid or there was a problem in
//                  in initializing the curve data
//      non-NULL    points to 'E'
LIB_EXPORT bigCurve
BnCurveInitialize(
    bigCurve          E,           // IN: curve structure to initialize
    TPM_ECC_CURVE     curveId      // IN: curve identifier
)
{
    const ECC_CURVE_DATA    *C = GetCurveData(curveId);
    if(C == NULL)
        E = NULL;
    if(E != NULL)
    {
        // This creates the OpenSSL memory context that stays in effect as long as the
        // curve (E) is defined.
        OSSL_ENTER();                       // if the allocation fails, the TPM fails
        EC_POINT                *P = NULL;
        BIG_INITIALIZED(bnP, C->prime);
        BIG_INITIALIZED(bnA, C->a);
        BIG_INITIALIZED(bnB, C->b);
        BIG_INITIALIZED(bnX, C->base.x);
        BIG_INITIALIZED(bnY, C->base.y);
        BIG_INITIALIZED(bnN, C->order);
        BIG_INITIALIZED(bnH, C->h);
    //
        E->C = C;
        E->CTX = CTX;

        // initialize EC group, associate a generator point and initialize the point
        // from the parameter data
        // Create a group structure
        E->G = EC_GROUP_new_curve_GFp(bnP, bnA, bnB, CTX);
        VERIFY(E->G != NULL);

        // Allocate a point in the group that will be used in setting the
        // generator. This is not needed after the generator is set.
        P = EC_POINT_new(E->G);
        VERIFY(P != NULL);

        // Need to use this in case Montgomery method is being used
        VERIFY(EC_POINT_set_affine_coordinates_GFp(E->G, P, bnX, bnY, CTX));
        // Now set the generator
        VERIFY(EC_GROUP_set_generator(E->G, P, bnN, bnH));

        EC_POINT_free(P);
        goto Exit;
Error:
        EC_POINT_free(P);
        BnCurveFree(E);
        E = NULL;
    }
Exit:
    return E;
}

//*** BnCurveFree()
// This function will free the allocated components of the curve and end the
// frame in which the curve data exists
LIB_EXPORT void
BnCurveFree(
    bigCurve                    E
)
{
    if(E)
    {
        EC_GROUP_free(E->G);
        OsslContextLeave(E->CTX);
    }
}


//*** BnEccModMult()
// This function does a point multiply of the form R = [d]S
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation; treat as result being point at infinity
LIB_EXPORT BOOL
BnEccModMult(
    bigPoint             R,         // OUT: computed point
    pointConst           S,         // IN: point to multiply by 'd' (optional)
    bigConst             d,         // IN: scalar for [d]S
    bigCurve             E
    )
{
    EC_POINT            *pR = EC_POINT_new(E->G);
    EC_POINT            *pS = EcPointInitialized(S, E);
    BIG_INITIALIZED(bnD, d);

    if(S == NULL)
        EC_POINT_mul(E->G, pR, bnD, NULL, NULL, E->CTX);
    else
        EC_POINT_mul(E->G, pR, NULL, pS, bnD, E->CTX);
    PointFromOssl(R, pR, E);
    EC_POINT_free(pR);
    EC_POINT_free(pS);
    return !BnEqualZero(R->z);
}

//*** BnEccModMult2()
// This function does a point multiply of the form R = [d]G + [u]Q
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation; treat as result being point at infinity
LIB_EXPORT BOOL
BnEccModMult2(
    bigPoint             R,         // OUT: computed point
    pointConst           S,         // IN: optional point
    bigConst             d,         // IN: scalar for [d]S or [d]G
    pointConst           Q,         // IN: second point
    bigConst             u,         // IN: second scalar
    bigCurve             E          // IN: curve
    )
{
    EC_POINT            *pR = EC_POINT_new(E->G);
    BIG_INITIALIZED(bnD, d);
    EC_POINT            *pQ = EcPointInitialized(Q, E);
    BIG_INITIALIZED(bnU, u);

    if(S == NULL || S == (pointConst)&(AccessCurveData(E)->base))
        EC_POINT_mul(E->G, pR, bnD, pQ, bnU, E->CTX);
    else
    {
        return FALSE;
    }
    PointFromOssl(R, pR, E);
    EC_POINT_free(pR);
    EC_POINT_free(pQ);
    return !BnEqualZero(R->z);
}

//** BnEccAdd()
// This function does addition of two points.
//  Return Type: BOOL
//      TRUE(1)         success
//      FALSE(0)        failure in operation; treat as result being point at infinity
LIB_EXPORT BOOL
BnEccAdd(
    bigPoint             R,         // OUT: computed point
    pointConst           S,         // IN: point to multiply by 'd'
    pointConst           Q,         // IN: second point
    bigCurve             E          // IN: curve
    )
{
    EC_POINT            *pR = EC_POINT_new(E->G);
    EC_POINT            *pS = EcPointInitialized(S, E);
    EC_POINT            *pQ = EcPointInitialized(Q, E);
//
    EC_POINT_add(E->G, pR, pS, pQ, E->CTX);

    PointFromOssl(R, pR, E);
    EC_POINT_free(pR);
    EC_POINT_free(pS);
    EC_POINT_free(pQ);
    return !BnEqualZero(R->z);
}

#endif // ALG_ECC


#endif // MATHLIB OSSL