<?xml version="1.0" encoding="utf-8"?>
<!--
/*
 * Copyright (C) 2019 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
-->
<resources>
    <!-- Boolean indicating whether the wifi chipset has 5GHz frequency band support -->
    <bool translatable="false" name="config_wifi5ghzSupport">true</bool>

    <!-- Boolean indicating whether 802.11r Fast BSS Transition is enabled on this platform -->
    <bool translatable="false" name="config_wifi_fast_bss_transition_enabled">true</bool>

    <!-- Boolean indicating whether the wifi chipset has background scan support -->
    <bool translatable="false" name="config_wifi_background_scan_support">true</bool>

    <!-- Integer thresholds, do not connect to APs with RSSI lower than these values  -->
    <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_5GHz">-77</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_24GHz">-80</integer>
    <!-- Integer thresholds for low network score, should be somewhat less than the entry thresholds -->
    <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-80</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-83</integer>

    <!-- Boolean indicating whether or not to revert to default country code when cellular
    radio is unable to find any MCC information to infer wifi country code from -->
    <bool translatable="false" name="config_wifi_revert_country_code_on_cellular_loss">false</bool>

    <!-- Boolean indicating whether or not wifi should turn off when emergency call is made -->
    <bool translatable="false" name="config_wifi_turn_off_during_emergency_call">true</bool>

    <!-- Configure wifi tcp buffersizes in the form:
         rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
    <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,8388608,262144,524288,4194304</string>

    <!-- Enable ACS (auto channel selection) for Wifi hotspot (SAP) -->
    <bool translatable="false" name="config_wifi_softap_acs_supported">true</bool>

    <!-- Enable 802.11ac for Wifi hotspot (SAP) -->
    <bool translatable="false" name="config_wifi_softap_ieee80211ac_supported">true</bool>

    <!-- True if the firmware supports connected MAC randomization -->
    <bool name="config_wifi_connected_mac_randomization_supported">true</bool>
    <bool name="config_wifiAllowNonPersistentMacRandomizationOnOpenSsids">true</bool>
    <!-- True if the firmware supports p2p MAC randomization -->
    <bool name="config_wifi_p2p_mac_randomization_supported">true</bool>

    <!-- True if the firmware supports ap MAC randomization -->
    <bool name="config_wifi_ap_mac_randomization_supported">true</bool>

    <!-- True if the firmware supports Wi-Fi link probing -->
    <bool name="config_wifi_link_probing_supported">true</bool>

    <!-- Idle Receive current for wifi radio. 0 by default-->
    <integer translatable="false" name="config_wifi_idle_receive_cur_ma">1</integer>

    <!-- Rx current for wifi radio. 0 by default-->
    <integer translatable="false" name="config_wifi_active_rx_cur_ma">100</integer>

    <!-- Tx current for wifi radio. 0 by default-->
    <integer translatable="false" name="config_wifi_tx_cur_ma">250</integer>

    <!-- Operating volatage for wifi radio. 0 by default-->
    <integer translatable="false" name="config_wifi_operating_voltage_mv">3800</integer>

    <!-- Indicates that a full bugreport should be triggered when wifi diagnostics detects an error on non-user (i.e debug) builds -->
    <bool translatable="false" name="config_wifi_diagnostics_bugreport_enabled">true</bool>

    <!-- Default access point SSID used for tethering -->
    <string name="wifi_tether_configure_ssid_default" translatable="false">Pixel</string>

    <!-- Integer indicating maximum hardware supported client number of soft ap -->
    <integer translatable="false" name="config_wifiHardwareSoftapMaxClientCount">32</integer>
    <!-- Array indicating wifi fatal firmware alert error code list from driver -->
    <array translatable="false" name="config_wifi_fatal_firmware_alert_error_code_list">
        <item>1</item>      <!-- WLAN_LOG_REASON_ROAM_FAIL -->
        <item>256</item>    <!-- DATA_STALL_LOG_NONE -->
        <item>257</item>    <!-- DATA_STALL_LOG_FW_VDEV_PAUSE -->
        <item>258</item>    <!-- DATA_STALL_LOG_HWSCHED_CMD_FILTER -->
        <item>259</item>    <!-- DATA_STALL_LOG_HWSCHED_CMD_FLUSH -->
        <item>260</item>    <!-- DATA_STALL_LOG_FW_RX_REFILL_FAILED -->
        <item>261</item>    <!-- DATA_STALL_LOG_FW_RX_FCS_LEN_ERROR -->
        <item>262</item>    <!-- DATA_STALL_LOG_FW_WDOG_ERRORS -->
        <item>263</item>    <!-- DATA_STALL_LOG_BB_WDOG_ERROR -->
        <item>264</item>    <!-- DATA_STALL_LOG_POST_TIM_NO_TXRX_ERROR -->
        <item>512</item>    <!-- DATA_STALL_LOG_HOST_STA_TX_TIMEOUT -->
        <item>513</item>    <!-- DATA_STALL_LOG_HOST_SOFTAP_TX_TIMEOUT -->
        <item>514</item>    <!-- DATA_STALL_LOG_NUD_FAILURE -->
    </array>

    <!-- Integer delay in milliseconds before set wlan interface up during watchdog recovery -->
    <integer name="config_wifi_framework_recovery_timeout_delay">3000</integer>

    <!-- Enable adding minimum confirmation duration when sending network score to connectivity service. -->
    <bool translatable="false" name="config_wifiMinConfirmationDurationSendNetworkScoreEnabled">true</bool>

    <!-- Disable channel utilization estimation with fixed value.
         b/160239223: Rx time is excluded in cca busy time and channel utilization is calculated
         correctly during heavy DL traffic -->
    <bool translatable="false" name="config_wifiChannelUtilizationOverrideEnabled">false</bool>

    <!-- Whether to use the explicit vendor HAL API: IWifiStaIface.setRoamingState for disabling fw roaming. -->
    <bool translatable="false" name="config_wifiUseHalApiToDisableFwRoaming">true</bool>

    <!-- Indicate the driver support NL80211_REG_CHANGED event. -->
    <bool translatable="false" name="config_wifiDriverSupportedNl80211RegChangedEvent">true</bool>

    <!-- Indicate the device support request channel on Wi-Fi Aware data-path. -->
    <bool translatable="false" name="config_wifiSupportChannelOnDataPath">true</bool>
</resources>
