/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Copyright (c) 2016-2020, The Linux Foundation. All rights reserved. */ #ifndef __UAPI_CAM_ISP_H__ #define __UAPI_CAM_ISP_H__ #include #include #include #include /* ISP driver name */ #define CAM_ISP_DEV_NAME "cam-isp" /* HW type */ #define CAM_ISP_HW_BASE 0 #define CAM_ISP_HW_CSID 1 #define CAM_ISP_HW_VFE 2 #define CAM_ISP_HW_IFE 3 #define CAM_ISP_HW_ISPIF 4 #define CAM_ISP_HW_MAX 5 /* Color Pattern */ #define CAM_ISP_PATTERN_BAYER_RGRGRG 0 #define CAM_ISP_PATTERN_BAYER_GRGRGR 1 #define CAM_ISP_PATTERN_BAYER_BGBGBG 2 #define CAM_ISP_PATTERN_BAYER_GBGBGB 3 #define CAM_ISP_PATTERN_YUV_YCBYCR 4 #define CAM_ISP_PATTERN_YUV_YCRYCB 5 #define CAM_ISP_PATTERN_YUV_CBYCRY 6 #define CAM_ISP_PATTERN_YUV_CRYCBY 7 #define CAM_ISP_PATTERN_MAX 8 /* Usage Type */ #define CAM_ISP_RES_USAGE_SINGLE 0 #define CAM_ISP_RES_USAGE_DUAL 1 #define CAM_ISP_RES_USAGE_MAX 2 /* Resource ID */ #define CAM_ISP_RES_ID_PORT 0 #define CAM_ISP_RES_ID_CLK 1 #define CAM_ISP_RES_ID_MAX 2 /* Resource Type - Type of resource for the resource id * defined in cam_isp_vfe.h, cam_isp_ife.h */ /* Lane Type in input resource for Port */ #define CAM_ISP_LANE_TYPE_DPHY 0 #define CAM_ISP_LANE_TYPE_CPHY 1 #define CAM_ISP_LANE_TYPE_MAX 2 /* ISP Resurce Composite Group ID */ #define CAM_ISP_RES_COMP_GROUP_NONE 0 #define CAM_ISP_RES_COMP_GROUP_ID_0 1 #define CAM_ISP_RES_COMP_GROUP_ID_1 2 #define CAM_ISP_RES_COMP_GROUP_ID_2 3 #define CAM_ISP_RES_COMP_GROUP_ID_3 4 #define CAM_ISP_RES_COMP_GROUP_ID_4 5 #define CAM_ISP_RES_COMP_GROUP_ID_5 6 #define CAM_ISP_RES_COMP_GROUP_ID_MAX 6 /* ISP packet opcode for ISP */ #define CAM_ISP_PACKET_OP_BASE 0 #define CAM_ISP_PACKET_INIT_DEV 1 #define CAM_ISP_PACKET_UPDATE_DEV 2 #define CAM_ISP_PACKET_OP_MAX 3 /* ISP packet meta_data type for command buffer */ #define CAM_ISP_PACKET_META_BASE 0 #define CAM_ISP_PACKET_META_LEFT 1 #define CAM_ISP_PACKET_META_RIGHT 2 #define CAM_ISP_PACKET_META_COMMON 3 #define CAM_ISP_PACKET_META_DMI_LEFT 4 #define CAM_ISP_PACKET_META_DMI_RIGHT 5 #define CAM_ISP_PACKET_META_DMI_COMMON 6 #define CAM_ISP_PACKET_META_CLOCK 7 #define CAM_ISP_PACKET_META_CSID 8 #define CAM_ISP_PACKET_META_DUAL_CONFIG 9 #define CAM_ISP_PACKET_META_GENERIC_BLOB_LEFT 10 #define CAM_ISP_PACKET_META_GENERIC_BLOB_RIGHT 11 #define CAM_ISP_PACKET_META_GENERIC_BLOB_COMMON 12 #define CAM_ISP_PACKET_META_REG_DUMP_PER_REQUEST 13 #define CAM_ISP_PACKET_META_REG_DUMP_ON_FLUSH 14 #define CAM_ISP_PACKET_META_REG_DUMP_ON_ERROR 15 /* DSP mode */ #define CAM_ISP_DSP_MODE_NONE 0 #define CAM_ISP_DSP_MODE_ONE_WAY 1 #define CAM_ISP_DSP_MODE_ROUND 2 /* ISP Generic Cmd Buffer Blob types */ #define CAM_ISP_GENERIC_BLOB_TYPE_HFR_CONFIG 0 #define CAM_ISP_GENERIC_BLOB_TYPE_CLOCK_CONFIG 1 #define CAM_ISP_GENERIC_BLOB_TYPE_BW_CONFIG 2 #define CAM_ISP_GENERIC_BLOB_TYPE_UBWC_CONFIG 3 #define CAM_ISP_GENERIC_BLOB_TYPE_CSID_CLOCK_CONFIG 4 #define CAM_ISP_GENERIC_BLOB_TYPE_FE_CONFIG 5 #define CAM_ISP_GENERIC_BLOB_TYPE_UBWC_CONFIG_V2 6 #define CAM_ISP_GENERIC_BLOB_TYPE_IFE_CORE_CONFIG 7 #define CAM_ISP_GENERIC_BLOB_TYPE_VFE_OUT_CONFIG 8 #define CAM_ISP_GENERIC_BLOB_TYPE_BW_CONFIG_V2 9 #define CAM_ISP_GENERIC_BLOB_TYPE_CSID_CONFIG 10 #define CAM_ISP_GENERIC_BLOB_TYPE_SENSOR_DIMENSION_CONFIG 11 #define CAM_ISP_GENERIC_BLOB_TYPE_CSID_QCFA_CONFIG 12 #define CAM_ISP_VC_DT_CFG 4 #define CAM_ISP_IFE0_HW 0x1 #define CAM_ISP_IFE1_HW 0x2 #define CAM_ISP_IFE0_LITE_HW 0x4 #define CAM_ISP_IFE1_LITE_HW 0x8 #define CAM_ISP_IFE2_LITE_HW 0x10 #define CAM_ISP_IFE2_HW 0x100 #define CAM_ISP_PXL_PATH 0x1 #define CAM_ISP_PPP_PATH 0x2 #define CAM_ISP_LCR_PATH 0x4 #define CAM_ISP_RDI0_PATH 0x8 #define CAM_ISP_RDI1_PATH 0x10 #define CAM_ISP_RDI2_PATH 0x20 #define CAM_ISP_RDI3_PATH 0x40 /* Per Path Usage Data */ #define CAM_ISP_USAGE_INVALID 0 #define CAM_ISP_USAGE_LEFT_PX 1 #define CAM_ISP_USAGE_RIGHT_PX 2 #define CAM_ISP_USAGE_RDI 3 /* Acquire with custom hw */ #define CAM_ISP_ACQ_CUSTOM_NONE 0 #define CAM_ISP_ACQ_CUSTOM_PRIMARY 1 #define CAM_ISP_ACQ_CUSTOM_SECONDARY 2 #define CAM_IFE_CSID_RDI_MAX 4 /* Query devices */ /** * struct cam_isp_dev_cap_info - A cap info for particular hw type * * @hw_type: Hardware type for the cap info * @reserved: reserved field for alignment * @hw_version: Hardware version * */ struct cam_isp_dev_cap_info { uint32_t hw_type; uint32_t reserved; struct cam_hw_version hw_version; }; /** * struct cam_isp_query_cap_cmd - ISP query device capability payload * * @device_iommu: returned iommu handles for device * @cdm_iommu: returned iommu handles for cdm * @num_dev: returned number of device capabilities * @reserved: reserved field for alignment * @dev_caps: returned device capability array * */ struct cam_isp_query_cap_cmd { struct cam_iommu_handle device_iommu; struct cam_iommu_handle cdm_iommu; int32_t num_dev; uint32_t reserved; struct cam_isp_dev_cap_info dev_caps[CAM_ISP_HW_MAX]; }; /* Acquire Device */ /** * struct cam_isp_out_port_info - An output port resource info * * @res_type: output resource type defined in file * cam_isp_vfe.h or cam_isp_ife.h * @format: output format of the resource * @wdith: output width in pixels * @height: output height in lines * @comp_grp_id: composite group id for the resource. * @split_point: split point in pixels for the dual VFE. * @secure_mode: flag to tell if output should be run in secure * mode or not. See cam_defs.h for definition * @reserved: reserved field for alignment * */ struct cam_isp_out_port_info { uint32_t res_type; uint32_t format; uint32_t width; uint32_t height; uint32_t comp_grp_id; uint32_t split_point; uint32_t secure_mode; uint32_t reserved; }; /** * struct cam_isp_out_port_info_v2 - An output port resource info * * @res_type: output resource type defined in file * cam_isp_vfe.h or cam_isp_ife.h * @format: output format of the resource * @wdith: output width in pixels * @height: output height in lines * @comp_grp_id: composite group id for the resource. * @split_point: split point in pixels for the dual VFE. * @secure_mode: flag to tell if output should be run in secure * mode or not. See cam_defs.h for definition * @wm_mode: WM mode * @out_port_res1: Output reserved field * @out_port_res2: Output reserved field * */ struct cam_isp_out_port_info_v2 { uint32_t res_type; uint32_t format; uint32_t width; uint32_t height; uint32_t comp_grp_id; uint32_t split_point; uint32_t secure_mode; uint32_t wm_mode; uint32_t out_port_res1; uint32_t out_port_res2; }; /** * struct cam_isp_in_port_info - An input port resource info * * @res_type: input resource type define in file * cam_isp_vfe.h or cam_isp_ife.h * @lane_type: lane type: c-phy or d-phy. * @lane_num: active lane number * @lane_cfg: lane configurations: 4 bits per lane * @vc: input virtual channel number * @dt: input data type number * @format: input format * @test_pattern: test pattern for the testgen * @usage_type: whether dual vfe is required * @left_start: left input start offset in pixels * @left_stop: left input stop offset in pixels * @left_width: left input width in pixels * @right_start: right input start offset in pixels. * Only for Dual VFE * @right_stop: right input stop offset in pixels. * Only for Dual VFE * @right_width: right input width in pixels. * Only for dual VFE * @line_start: top of the line number * @line_stop: bottome of the line number * @height: input height in lines * @pixel_clk; sensor output clock * @batch_size: batch size for HFR mode * @dsp_mode: DSP stream mode (Defines as CAM_ISP_DSP_MODE_*) * @hbi_cnt: HBI count for the camif input * @reserved: Reserved field for alignment * @num_out_res: number of the output resource associated * @data: payload that contains the output resources * */ struct cam_isp_in_port_info { uint32_t res_type; uint32_t lane_type; uint32_t lane_num; uint32_t lane_cfg; uint32_t vc; uint32_t dt; uint32_t format; uint32_t test_pattern; uint32_t usage_type; uint32_t left_start; uint32_t left_stop; uint32_t left_width; uint32_t right_start; uint32_t right_stop; uint32_t right_width; uint32_t line_start; uint32_t line_stop; uint32_t height; uint32_t pixel_clk; uint32_t batch_size; uint32_t dsp_mode; uint32_t hbi_cnt; uint32_t reserved; uint32_t num_out_res; struct cam_isp_out_port_info data[1]; }; /** * struct cam_isp_in_port_info_v2 - An input port resource info * * @res_type: input resource type define in file * cam_isp_vfe.h or cam_isp_ife.h * @lane_type: lane type: c-phy or d-phy. * @lane_num: active lane number * @lane_cfg: lane configurations: 4 bits per lane * @vc: input virtual channel number * @dt: input data type number * @num_valid_vc_dt: valid vc and dt in array * @format: input format * @test_pattern: test pattern for the testgen * @usage_type: whether dual vfe is required * @left_start: left input start offset in pixels * @left_stop: left input stop offset in pixels * @left_width: left input width in pixels * @right_start: right input start offset in pixels. * Only for Dual VFE * @right_stop: right input stop offset in pixels. * only for Dual VFE * @right_width: right input width in pixels. * only for dual VFE * @line_start: top of the line number * @line_stop: bottome of the line number * @height: input height in lines * @pixel_clk; sensor output clock * @batch_size: batch size for HFR mode * @dsp_mode: DSP stream mode (Defines as CAM_ISP_DSP_MODE_*) * @hbi_cnt: HBI count for the camif input * @cust_node: if any custom HW block is present before IFE * @num_out_res: number of the output resource associated * @horizontal_bin: Horizontal Binning info * @qcfa_bin: Quadra Binning info * @csid_res_1: payload for future use * @csid_res_2: payload for future use * @ife_res_1: payload for future use * @ife_res_2: payload for future use * @data: payload that contains the output resources * */ struct cam_isp_in_port_info_v2 { uint32_t res_type; uint32_t lane_type; uint32_t lane_num; uint32_t lane_cfg; uint32_t vc[CAM_ISP_VC_DT_CFG]; uint32_t dt[CAM_ISP_VC_DT_CFG]; uint32_t num_valid_vc_dt; uint32_t format; uint32_t test_pattern; uint32_t usage_type; uint32_t left_start; uint32_t left_stop; uint32_t left_width; uint32_t right_start; uint32_t right_stop; uint32_t right_width; uint32_t line_start; uint32_t line_stop; uint32_t height; uint32_t pixel_clk; uint32_t batch_size; uint32_t dsp_mode; uint32_t hbi_cnt; uint32_t cust_node; uint32_t num_out_res; uint32_t offline_mode; uint32_t horizontal_bin; uint32_t qcfa_bin; uint32_t csid_res_1; uint32_t csid_res_2; uint32_t ife_res_1; uint32_t ife_res_2; struct cam_isp_out_port_info_v2 data[1]; }; /** * struct cam_isp_resource - A resource bundle * * @resoruce_id: resource id for the resource bundle * @length: length of the while resource blob * @handle_type: type of the resource handle * @reserved: reserved field for alignment * @res_hdl: resource handle that points to the * resource array; * */ struct cam_isp_resource { uint32_t resource_id; uint32_t length; uint32_t handle_type; uint32_t reserved; uint64_t res_hdl; }; /** * struct cam_isp_port_hfr_config - HFR configuration for this port * * @resource_type: Resource type * @subsample_pattern: Subsample pattern. Used in HFR mode. It * should be consistent with batchSize and * CAMIF programming. * @subsample_period: Subsample period. Used in HFR mode. It * should be consistent with batchSize and * CAMIF programming. * @framedrop_pattern: Framedrop pattern * @framedrop_period: Framedrop period * @reserved: Reserved for alignment */ struct cam_isp_port_hfr_config { uint32_t resource_type; uint32_t subsample_pattern; uint32_t subsample_period; uint32_t framedrop_pattern; uint32_t framedrop_period; uint32_t reserved; } __attribute__((packed)); /** * struct cam_isp_resource_hfr_config - Resource HFR configuration * * @num_ports: Number of ports * @reserved: Reserved for alignment * @port_hfr_config: HFR configuration for each IO port */ struct cam_isp_resource_hfr_config { uint32_t num_ports; uint32_t reserved; struct cam_isp_port_hfr_config port_hfr_config[1]; } __attribute__((packed)); /** * struct cam_isp_dual_split_params - dual isp spilt parameters * * @split_point: Split point information x, where (0 < x < width) * left ISP's input ends at x + righ padding and * Right ISP's input starts at x - left padding * @right_padding: Padding added past the split point for left * ISP's input * @left_padding: Padding added before split point for right * ISP's input * @reserved: Reserved filed for alignment * */ struct cam_isp_dual_split_params { uint32_t split_point; uint32_t right_padding; uint32_t left_padding; uint32_t reserved; }; /** * struct cam_isp_dual_stripe_config - stripe config per bus client * * @offset: Start horizontal offset relative to * output buffer * In UBWC mode, this value indicates the H_INIT * value in pixel * @width: Width of the stripe in bytes * @tileconfig Ubwc meta tile config. Contain the partial * tile info * @port_id: port id of ISP output * */ struct cam_isp_dual_stripe_config { uint32_t offset; uint32_t width; uint32_t tileconfig; uint32_t port_id; }; /** * struct cam_isp_dual_config - dual isp configuration * * @num_ports Number of isp output ports * @reserved Reserved field for alignment * @split_params: Inpput split parameters * @stripes: Stripe information * */ struct cam_isp_dual_config { uint32_t num_ports; uint32_t reserved; struct cam_isp_dual_split_params split_params; struct cam_isp_dual_stripe_config stripes[1]; } __attribute__((packed)); /** * struct cam_isp_clock_config - Clock configuration * * @usage_type: Usage type (Single/Dual) * @num_rdi: Number of RDI votes * @left_pix_hz: Pixel Clock for Left ISP * @right_pix_hz: Pixel Clock for Right ISP, valid only if Dual * @rdi_hz: RDI Clock. ISP clock will be max of RDI and * PIX clocks. For a particular context which ISP * HW the RDI is allocated to is not known to UMD. * Hence pass the clock and let KMD decide. */ struct cam_isp_clock_config { uint32_t usage_type; uint32_t num_rdi; uint64_t left_pix_hz; uint64_t right_pix_hz; uint64_t rdi_hz[1]; } __attribute__((packed)); /** * struct cam_isp_csid_clock_config - CSID clock configuration * * @csid_clock CSID clock */ struct cam_isp_csid_clock_config { uint64_t csid_clock; } __attribute__((packed)); /** * struct cam_isp_csid_qcfa_config - CSID qcfa binning support configuration * * @csid_binning CSID binning */ struct cam_isp_csid_qcfa_config { uint32_t csid_binning; } __attribute__((packed)); /** * struct cam_isp_bw_vote - Bandwidth vote information * * @resource_id: Resource ID * @reserved: Reserved field for alignment * @cam_bw_bps: Bandwidth vote for CAMNOC * @ext_bw_bps: Bandwidth vote for path-to-DDR after CAMNOC */ struct cam_isp_bw_vote { uint32_t resource_id; uint32_t reserved; uint64_t cam_bw_bps; uint64_t ext_bw_bps; } __attribute__((packed)); /** * struct cam_isp_bw_config - Bandwidth configuration * * @usage_type: Usage type (Single/Dual) * @num_rdi: Number of RDI votes * @left_pix_vote: Bandwidth vote for left ISP * @right_pix_vote: Bandwidth vote for right ISP * @rdi_vote: RDI bandwidth requirements */ struct cam_isp_bw_config { uint32_t usage_type; uint32_t num_rdi; struct cam_isp_bw_vote left_pix_vote; struct cam_isp_bw_vote right_pix_vote; struct cam_isp_bw_vote rdi_vote[1]; } __attribute__((packed)); /** * struct cam_isp_bw_config_v2 - Bandwidth configuration * * @usage_type: Usage type (Single/Dual) * @num_paths: Number of axi data paths * @axi_path Per path vote info */ struct cam_isp_bw_config_v2 { uint32_t usage_type; uint32_t num_paths; struct cam_axi_per_path_bw_vote axi_path[1]; } __attribute__((packed)); /** * struct cam_fe_config - Fetch Engine configuration * * @version: fetch engine veriosn * @min_vbi: require min vbi * @fs_mode: indicates if fs mode enabled * @fs_line_sync_en: frame level sync or line level * sync for fetch engine * @hbi_count: hbi count * @fs_sync_enable: indicates if fetch engine working * wokring in sync with write engine * @go_cmd_sel: softwrae go_cmd or hw go_cmd * @client_enable: enable read engine * @source_addr: adrress of buffer to read from * @width: buffer width * @height: buffer height * @stride: buffer stride (here equal to width) * @format: format of image in buffer * @unpacker_cfg: unpacker config type * @latency_buf_size: latency buffer for read engine */ struct cam_fe_config { uint64_t version; uint32_t min_vbi; uint32_t fs_mode; uint32_t fs_line_sync_en; uint32_t hbi_count; uint32_t fs_sync_enable; uint32_t go_cmd_sel; uint32_t client_enable; uint32_t source_addr; uint32_t width; uint32_t height; uint32_t stride; uint32_t format; uint32_t unpacker_cfg; uint32_t latency_buf_size; } __attribute__((packed)); /** * struct cam_isp_sensor_path_dimension * * @width expected width * @height expected height * @measure_enabled flag to indicate if pixel measurement is to be enabled */ struct cam_isp_sensor_dimension { uint32_t width; uint32_t height; uint32_t measure_enabled; } __attribute__((packed)); /** * struct cam_isp_sensor_config - Sensor Dimension configuration * * @ppp_path: expected ppp path configuration * @ipp_path: expected ipp path configuration * @rdi_path: expected rdi path configuration * @hbi: HBI value * @vbi: VBI value */ struct cam_isp_sensor_config { struct cam_isp_sensor_dimension ppp_path; struct cam_isp_sensor_dimension ipp_path; struct cam_isp_sensor_dimension rdi_path[CAM_IFE_CSID_RDI_MAX]; uint32_t hbi; uint32_t vbi; } __attribute__((packed)); /** * struct cam_isp_core_config - ISP core registers configuration * * @version: Version info * @vid_ds16_r2pd: Enables Y and C merging PD output for video DS16 * @vid_ds4_r2pd: Enables Y and C merging PD output for video DS4 * @disp_ds16_r2pd: Enables Y and C merging PD output for disp DS16 * @disp_ds4_r2pd: Enables Y and C merging PD output for disp DS4 * @dsp_streaming_tap_point: This selects source for DSP streaming interface * @ihist_src_sel: Selects input for IHIST module * @hdr_be_src_sel: Selects input for HDR BE module * @hdr_bhist_src_sel: Selects input for HDR BHIST module * @input_mux_sel_pdaf: Selects input for PDAF * @input_mux_sel_pp: Selects input for Pixel Pipe * @reserved: Reserved */ struct cam_isp_core_config { uint32_t version; uint32_t vid_ds16_r2pd; uint32_t vid_ds4_r2pd; uint32_t disp_ds16_r2pd; uint32_t disp_ds4_r2pd; uint32_t dsp_streaming_tap_point; uint32_t ihist_src_sel; uint32_t hdr_be_src_sel; uint32_t hdr_bhist_src_sel; uint32_t input_mux_sel_pdaf; uint32_t input_mux_sel_pp; uint32_t reserved; } __attribute__((packed)); /** * struct cam_isp_acquire_hw_info - ISP acquire HW params * * @common_info_version : Version of common info struct used * @common_info_size : Size of common info struct used * @common_info_offset : Offset of common info from start of data * @num_inputs : Number of inputs * @input_info_version : Version of input info struct used * @input_info_size : Size of input info struct used * @input_info_offset : Offset of input info from start of data * @data : Start of data region */ struct cam_isp_acquire_hw_info { uint16_t common_info_version; uint16_t common_info_size; uint32_t common_info_offset; uint32_t num_inputs; uint32_t input_info_version; uint32_t input_info_size; uint32_t input_info_offset; uint64_t data; }; /** * struct cam_isp_vfe_wm_config - VFE write master config per port * * @port_type : Unique ID of output port * @wm_mode : Write master mode * 0x0 - Line based mode * 0x1 - Frame based mode * 0x2 - Index based mode, valid for BAF only * @h_init : Horizontal starting coordinate in pixels. Must be a * multiple of 3 for TP10 format * @height : Height in pixels * @width : Width in pixels * @virtual_frame_en : Enabling virtual frame will prevent actual request from * being sent to NOC * @stride : Write master stride * @offset : Write master offset * @reserved_1 : Reserved field for Write master config * @reserved_2 : Reserved field for Write master config * @reserved_3 : Reserved field for Write master config * @reserved_4 : Reserved field for Write master config */ struct cam_isp_vfe_wm_config { uint32_t port_type; uint32_t wm_mode; uint32_t h_init; uint32_t height; uint32_t width; uint32_t virtual_frame_en; uint32_t stride; uint32_t offset; uint32_t reserved_1; uint32_t reserved_2; uint32_t reserved_3; uint32_t reserved_4; }; /** * struct cam_isp_vfe_out_config - VFE write master config * * @num_ports : Number of ports * @reserved : Reserved field * @wm_config : VFE out config */ struct cam_isp_vfe_out_config { uint32_t num_ports; uint32_t reserved; struct cam_isp_vfe_wm_config wm_config[1]; }; /** * struct cam_isp_csid_epd_config - Support for EPD Packet config * * @is_epd_sensor : flag to check if epd supported */ struct cam_isp_csid_epd_config { uint32_t is_epd_supported; }; #define CAM_ISP_ACQUIRE_COMMON_VER0 0x1000 #define CAM_ISP_ACQUIRE_COMMON_SIZE_VER0 0x0 #define CAM_ISP_ACQUIRE_INPUT_VER0 0x2000 #define CAM_ISP_ACQUIRE_INPUT_SIZE_VER0 sizeof(struct cam_isp_in_port_info) #define CAM_ISP_ACQUIRE_OUT_VER0 0x3000 #define CAM_ISP_ACQUIRE_OUT_SIZE_VER0 sizeof(struct cam_isp_out_port_info) #endif /* __UAPI_CAM_ISP_H__ */