#!/usr/bin/env python3 # # Copyright (c) 2018, The OpenThread Authors. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. Neither the name of the copyright holder nor the # names of its contributors may be used to endorse or promote products # derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. from wpan import verify import wpan # ----------------------------------------------------------------------------------------------------------------------- # Test description: simple wpanctl get and set commands test_name = __file__[:-3] if __file__.endswith('.py') else __file__ print('-' * 120) print('Starting \'{}\''.format(test_name)) # ----------------------------------------------------------------------------------------------------------------------- # Creating `wpan.Nodes` instances node = wpan.Node() # ----------------------------------------------------------------------------------------------------------------------- # Init all nodes wpan.Node.init_all_nodes() # ----------------------------------------------------------------------------------------------------------------------- # Test implementation verify(node.get(wpan.WPAN_STATE) == wpan.STATE_OFFLINE) # set some of properties and check and verify that the value is indeed # changed... node.set(wpan.WPAN_NAME, 'test-network') verify(node.get(wpan.WPAN_NAME) == '"test-network"') node.set(wpan.WPAN_NAME, 'a') verify(node.get(wpan.WPAN_NAME) == '"a"') node.set(wpan.WPAN_PANID, '0xABBA') verify(node.get(wpan.WPAN_PANID) == '0xABBA') node.set(wpan.WPAN_XPANID, '1020031510006016', binary_data=True) verify(node.get(wpan.WPAN_XPANID) == '0x1020031510006016') node.set(wpan.WPAN_KEY, '0123456789abcdeffecdba9876543210', binary_data=True) verify(node.get(wpan.WPAN_KEY) == '[0123456789ABCDEFFECDBA9876543210]') node.set(wpan.WPAN_MAC_ALLOWLIST_ENABLED, '1') verify(node.get(wpan.WPAN_MAC_ALLOWLIST_ENABLED) == 'true') node.set(wpan.WPAN_MAC_ALLOWLIST_ENABLED, '0') verify(node.get(wpan.WPAN_MAC_ALLOWLIST_ENABLED) == 'false') node.set(wpan.WPAN_MAC_ALLOWLIST_ENABLED, 'true') verify(node.get(wpan.WPAN_MAC_ALLOWLIST_ENABLED) == 'true') node.set(wpan.WPAN_THREAD_ROUTER_UPGRADE_THRESHOLD, '100') verify(int(node.get(wpan.WPAN_THREAD_ROUTER_UPGRADE_THRESHOLD), 0) == 100) node.set(wpan.WPAN_THREAD_ROUTER_DOWNGRADE_THRESHOLD, '40') verify(int(node.get(wpan.WPAN_THREAD_ROUTER_DOWNGRADE_THRESHOLD), 0) == 40) # Ensure `get` is successful with all gettable properties all_gettable_props = [ wpan.WPAN_STATE, wpan.WPAN_NAME, wpan.WPAN_PANID, wpan.WPAN_XPANID, wpan.WPAN_KEY, wpan.WPAN_CHANNEL, wpan.WPAN_HW_ADDRESS, wpan.WPAN_EXT_ADDRESS, wpan.WPAN_POLL_INTERVAL, wpan.WPAN_NODE_TYPE, wpan.WPAN_ROLE, wpan.WPAN_PARTITION_ID, wpan.WPAN_NCP_VERSION, wpan.WPAN_NCP_MCU_POWER_STATE, wpan.WPAN_NETWORK_PASSTHRU_PORT, wpan.WPAN_IP6_LINK_LOCAL_ADDRESS, wpan.WPAN_IP6_MESH_LOCAL_ADDRESS, wpan.WPAN_IP6_MESH_LOCAL_PREFIX, wpan.WPAN_IP6_ALL_ADDRESSES, wpan.WPAN_IP6_MULTICAST_ADDRESSES, wpan.WPAN_THREAD_RLOC16, wpan.WPAN_THREAD_ROUTER_ID, wpan.WPAN_THREAD_NETWORK_DATA, wpan.WPAN_THREAD_CHILD_TABLE, wpan.WPAN_THREAD_CHILD_TABLE_ASVALMAP, wpan.WPAN_THREAD_CHILD_TABLE_ADDRESSES, wpan.WPAN_THREAD_NEIGHBOR_TABLE, wpan.WPAN_THREAD_NEIGHBOR_TABLE_ASVALMAP, wpan.WPAN_THREAD_NEIGHBOR_TABLE_ERR_RATES, wpan.WPAN_THREAD_ROUTER_TABLE, wpan.WPAN_THREAD_ROUTER_TABLE_ASVALMAP, wpan.WPAN_THREAD_CHILD_TIMEOUT, wpan.WPAN_THREAD_NETWORK_DATA_VERSION, wpan.WPAN_THREAD_STABLE_NETWORK_DATA, wpan.WPAN_THREAD_STABLE_NETWORK_DATA_VERSION, wpan.WPAN_THREAD_DEVICE_MODE, wpan.WPAN_THREAD_OFF_MESH_ROUTES, wpan.WPAN_THREAD_ON_MESH_PREFIXES, wpan.WPAN_THREAD_ROUTER_ROLE_ENABLED, wpan.WPAN_THREAD_CONFIG_FILTER_RLOC_ADDRESSES, wpan.WPAN_THREAD_ROUTER_UPGRADE_THRESHOLD, wpan.WPAN_THREAD_ROUTER_DOWNGRADE_THRESHOLD, wpan.WPAN_THREAD_ACTIVE_DATASET, wpan.WPAN_THREAD_ACTIVE_DATASET_ASVALMAP, wpan.WPAN_THREAD_PENDING_DATASET, wpan.WPAN_THREAD_PENDING_DATASET_ASVALMAP, wpan.WPAN_OT_LOG_LEVEL, wpan.WPAN_OT_STEERING_DATA_ADDRESS, wpan.WPAN_OT_STEERING_DATA_SET_WHEN_JOINABLE, wpan.WPAN_OT_MSG_BUFFER_COUNTERS, wpan.WPAN_OT_MSG_BUFFER_COUNTERS_AS_STRING, wpan.WPAN_NCP_COUNTER_ALL_MAC, wpan.WPAN_NCP_COUNTER_ALL_MAC_ASVALMAP, wpan.WPAN_MAC_ALLOWLIST_ENABLED, wpan.WPAN_MAC_ALLOWLIST_ENTRIES, wpan.WPAN_MAC_ALLOWLIST_ENTRIES_ASVALMAP, wpan.WPAN_MAC_DENYLIST_ENABLED, wpan.WPAN_MAC_DENYLIST_ENTRIES, wpan.WPAN_MAC_DENYLIST_ENTRIES_ASVALMAP, wpan.WPAN_JAM_DETECTION_STATUS, wpan.WPAN_JAM_DETECTION_ENABLE, wpan.WPAN_JAM_DETECTION_RSSI_THRESHOLD, wpan.WPAN_JAM_DETECTION_WINDOW, wpan.WPAN_JAM_DETECTION_BUSY_PERIOD, wpan.WPAN_JAM_DETECTION_DEBUG_HISTORY_BITMAP, wpan.WPAN_CHANNEL_MONITOR_SAMPLE_INTERVAL, wpan.WPAN_CHANNEL_MONITOR_RSSI_THRESHOLD, wpan.WPAN_CHANNEL_MONITOR_SAMPLE_WINDOW, wpan.WPAN_CHANNEL_MONITOR_SAMPLE_COUNT, wpan.WPAN_CHANNEL_MONITOR_CHANNEL_QUALITY, wpan.WPAN_CHANNEL_MONITOR_CHANNEL_QUALITY_ASVALMAP, wpan.WPAN_CHANNEL_MANAGER_NEW_CHANNEL, wpan.WPAN_CHANNEL_MANAGER_DELAY, wpan.WPAN_CHANNEL_MANAGER_CHANNEL_SELECT, wpan.WPAN_CHANNEL_MANAGER_AUTO_SELECT_ENABLED, wpan.WPAN_CHANNEL_MANAGER_AUTO_SELECT_INTERVAL, wpan.WPAN_CHANNEL_MANAGER_SUPPORTED_CHANNEL_MASK, wpan.WPAN_CHANNEL_MANAGER_FAVORED_CHANNEL_MASK, wpan.WPAN_THREAD_LEADER_ADDRESS, wpan.WPAN_THREAD_LEADER_ROUTER_ID, wpan.WPAN_THREAD_LEADER_WEIGHT, wpan.WPAN_THREAD_LEADER_LOCAL_WEIGHT, wpan.WPAN_THREAD_LEADER_NETWORK_DATA, wpan.WPAN_THREAD_STABLE_LEADER_NETWORK_DATA, ] # note: Partition Id only takes effect after forming one Thread network. node.set(wpan.WPAN_PARTITION_ID, '12345678') node.form('get-set') # verify that Partition Id property is indeed changed. verify(int(node.get(wpan.WPAN_PARTITION_ID), 0) == 12345678) for prop in all_gettable_props: node.get(prop) # ----------------------------------------------------------------------------------------------------------------------- # Test finished wpan.Node.finalize_all_nodes() print('\'{}\' passed.'.format(test_name))