# Shiba specific init.rc
import /vendor/etc/init/hw/init.zuma.rc

on init && property:ro.vendor.factory=1
    import /vendor/etc/init/hw/init.factory.rc

on init
    # NFC streset tool name
    setprop persist.vendor.nfc.streset libstreset23
    setprop persist.vendor.se.streset libstreset23

on early-boot
    # Wait for insmod_sh to finish all common modules
    wait_for_prop vendor.common.modules.ready 1
    start insmod_sh_shiba

service insmod_sh_shiba /vendor/bin/insmod.sh /vendor_dlkm/etc/init.insmod.${ro.hardware}.cfg
    class main
    user root
    group root system
    disabled
    oneshot

on property:vendor.mfgapi.touchpanel.permission=1
    chmod 0600 /sys/devices/virtual/sec/tsp/cmd
    chown system system /sys/devices/virtual/sec/tsp/cmd

# WiFi
on post-fs-data
    setprop wifi.direct.interface p2p-dev-wlan0
    setprop wifi.aware.interface aware_nmi0

    # Speaker amp permission
    chmod 644 /mnt/vendor/persist/audio/speaker.cal
    chmod 644 /mnt/vendor/persist/audio/speaker.diag

# Bluetooth
on post-fs-data
    chown bluetooth system /proc/bluetooth/timesync

# Start the twoshay touch service
on property:vendor.device.modules.ready=1
    start twoshay

# Toggle high_sensitivity according to touch_sensitivity_mode
on property:persist.vendor.touch_sensitivity_mode=0 && property:sys.boot_completed=1
    write /sys/devices/virtual/goog_touch_interface/gti.0/screen_protector_mode_enabled 0

on property:persist.vendor.touch_sensitivity_mode=1 && property:sys.boot_completed=1
    write /sys/devices/virtual/goog_touch_interface/gti.0/screen_protector_mode_enabled 1

# Haptics
on property:vendor.all.modules.ready=1
    mkdir /mnt/vendor/persist/haptics 0770 system system
    chmod 770 /mnt/vendor/persist/haptics
    chmod 440 /mnt/vendor/persist/haptics/cs40l26.cal
    chown system system /mnt/vendor/persist/haptics
    chown system system /mnt/vendor/persist/haptics/cs40l26.cal

    chown system system /sys/bus/i2c/devices/0-0043/calibration/f0_stored
    chown system system /sys/bus/i2c/devices/0-0043/calibration/q_stored
    chown system system /sys/bus/i2c/devices/0-0043/calibration/redc_stored
    chown system system /sys/bus/i2c/devices/0-0043/default/vibe_state
    chown system system /sys/bus/i2c/devices/0-0043/default/num_waves
    chown system system /sys/bus/i2c/devices/0-0043/default/f0_offset
    chown system system /sys/bus/i2c/devices/0-0043/default/owt_free_space
    chown system system /sys/bus/i2c/devices/0-0043/default/f0_comp_enable
    chown system system /sys/bus/i2c/devices/0-0043/default/redc_comp_enable
    chown system system /sys/bus/i2c/devices/0-0043/default/delay_before_stop_playback_us
    chown system system /sys/bus/i2c/devices/0-0043/dbc/dbc_env_rel_coef
    chown system system /sys/bus/i2c/devices/0-0043/dbc/dbc_rise_headroom
    chown system system /sys/bus/i2c/devices/0-0043/dbc/dbc_fall_headroom
    chown system system /sys/bus/i2c/devices/0-0043/dbc/dbc_enable
    chown system system /sys/bus/i2c/devices/0-0043/dbc/dbc_tx_lvl_thresh_fs
    chown system system /sys/bus/i2c/devices/0-0043/dbc/dbc_tx_lvl_hold_off_ms
    chown system system /sys/bus/i2c/devices/0-0043/default/pm_active_timeout_ms

    enable vendor.vibrator.cs40l26

# For Japan sku, always enforce camera shutter sound
# Since this property is read by the audio server in system service,
# it should be written by the system init.
on property:ro.boot.hardware.sku=GZPF0
    setprop audio.camerasound.force true